[PATCH v5 3/3] cpufreq: arm_big_little: Add support to register a cpufreq cooling device

From: Punit Agrawal
Date: Tue Nov 17 2015 - 07:07:26 EST


Register passive cooling devices when initialising cpufreq on
big.LITTLE systems. If the device tree provides a dynamic power
coefficient for the CPUs then the bound cooling device will support
the extensions that allow it to be used with all the existing thermal
governors including the power allocator governor.

A cooling device will be created per individual frequency domain and
can be bound to thermal zones via the thermal DT bindings.

Signed-off-by: Punit Agrawal <punit.agrawal@xxxxxxx>
Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
---
drivers/cpufreq/Kconfig.arm | 2 ++
drivers/cpufreq/arm_big_little.c | 41 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 1582c1c..0e0052e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -6,6 +6,8 @@
config ARM_BIG_LITTLE_CPUFREQ
tristate "Generic ARM big LITTLE CPUfreq driver"
depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
+ # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
+ depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index c5d256c..c251247 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -23,6 +23,7 @@
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/mutex.h>
@@ -55,6 +56,7 @@ static bool bL_switching_enabled;
#define ACTUAL_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq << 1 : freq)
#define VIRT_FREQ(cluster, freq) ((cluster == A7_CLUSTER) ? freq >> 1 : freq)

+static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
static struct cpufreq_arm_bL_ops *arm_bL_ops;
static struct clk *clk[MAX_CLUSTERS];
static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
@@ -493,6 +495,12 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
static int bL_cpufreq_exit(struct cpufreq_policy *policy)
{
struct device *cpu_dev;
+ int cur_cluster = cpu_to_cluster(policy->cpu);
+
+ if (cur_cluster < MAX_CLUSTERS) {
+ cpufreq_cooling_unregister(cdev[cur_cluster]);
+ cdev[cur_cluster] = NULL;
+ }

cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
@@ -507,6 +515,38 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy)
return 0;
}

+static void bL_cpufreq_ready(struct cpufreq_policy *policy)
+{
+ struct device *cpu_dev = get_cpu_device(policy->cpu);
+ int cur_cluster = cpu_to_cluster(policy->cpu);
+ struct device_node *np;
+
+ /* Do not register a cpu_cooling device if we are in IKS mode */
+ if (cur_cluster >= MAX_CLUSTERS)
+ return;
+
+ np = of_node_get(cpu_dev->of_node);
+ if (WARN_ON(!np))
+ return;
+
+ if (of_find_property(np, "#cooling-cells", NULL)) {
+ u32 power_coefficient = 0;
+
+ of_property_read_u32(np, "dynamic-power-coefficient",
+ &power_coefficient);
+
+ cdev[cur_cluster] = of_cpufreq_power_cooling_register(np,
+ policy->related_cpus, power_coefficient, NULL);
+ if (IS_ERR(cdev[cur_cluster])) {
+ dev_err(cpu_dev,
+ "running cpufreq without cooling device: %ld\n",
+ PTR_ERR(cdev[cur_cluster]));
+ cdev[cur_cluster] = NULL;
+ }
+ }
+ of_node_put(np);
+}
+
static struct cpufreq_driver bL_cpufreq_driver = {
.name = "arm-big-little",
.flags = CPUFREQ_STICKY |
@@ -517,6 +557,7 @@ static struct cpufreq_driver bL_cpufreq_driver = {
.get = bL_cpufreq_get_rate,
.init = bL_cpufreq_init,
.exit = bL_cpufreq_exit,
+ .ready = bL_cpufreq_ready,
.attr = cpufreq_generic_attr,
};

--
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/