[PATCH v3 20/32] scsi: hisi_sas: add v1 hw interrupt init

From: John Garry
Date: Mon Nov 09 2015 - 11:18:50 EST


Add code to interrupts, so now we can get a phy up
interrupt when a disk is connected.

Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas.h | 5 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 162 +++++++++++++++++++++++++++++++++
2 files changed, 167 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 039f285..b236a2f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -38,6 +38,11 @@
#define HISI_SAS_NAME_LEN 32


+enum {
+ PORT_TYPE_SAS = (1U << 1),
+ PORT_TYPE_SATA = (1U << 0),
+};
+
enum dev_status {
HISI_SAS_DEV_NORMAL,
HISI_SAS_DEV_EH,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 4d1402d..b595d24 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -728,6 +728,160 @@ static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}

+/* Interrupts */
+static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i, phy_no = sas_phy->id;
+ u32 irq_value, context, port_id, link_rate;
+ u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
+ struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+ if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
+ dev_dbg(dev, "phyup: irq_value = %x not set enable bit\n",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
+ if (context & 1 << phy_no) {
+ dev_err(dev, "phyup: phy%d SATA attached equipment\n",
+ phy_no);
+ goto end;
+ }
+
+ port_id = (hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA) >> (4 * phy_no))
+ & 0xf;
+ if (port_id == 0xf) {
+ dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ for (i = 0; i < 6; i++) {
+ u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
+ RX_IDAF_DWORD0 + (i * 4));
+ frame_rcvd[i] = __swab32(idaf);
+ }
+
+ /* Get the linkrate */
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ sas_phy->linkrate = link_rate;
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ memcpy(sas_phy->attached_sas_addr,
+ &id->sas_addr, SAS_ADDR_SIZE);
+ dev_info(dev, "phyup: phy%d link_rate=%d\n",
+ phy_no, link_rate);
+ phy->port_id = port_id;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->phy_attached = 1;
+ phy->identify.device_type = id->dev_type;
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_PHY_ENA_MSK);
+
+ if (irq_value & CHL_INT2_SL_PHY_ENA_MSK) {
+ u32 chl_int0 = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ chl_int0 &= ~CHL_INT0_PHYCTRL_NOTRDY_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, chl_int0);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3ce3ee);
+ }
+
+ return res;
+}
+static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
+ {"Phy Up"},
+};
+static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_phyup_v1_hw,
+};
+
+static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i, j, irq, rc;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct device_node *np = dev->of_node;
+ char *int_names = hisi_hba->int_names;
+
+ if (!np)
+ return -ENOENT;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+
+ for (j = 0; j < HISI_SAS_PHY_INT_NR; j++) {
+ int idx = (i * HISI_SAS_PHY_INT_NR) + j;
+
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev,
+ "irq init: fail map phy interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev),
+ phy_int_names[j], i);
+ rc = devm_request_irq(dev, irq, phy_interrupts[j], 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ phy);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "phy interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+ }
+ return 0;
+}
+
+static int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ /* Clear interrupt status */
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT0);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT1);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT2);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, val);
+
+ /* Unmask interrupt */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK, 0x3ce3ee);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0x17fff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8000012a);
+
+ /* bypass chip bug mask abnormal intr */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ }
+
+ return 0;
+}
+
static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
{
int rc;
@@ -736,6 +890,14 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
if (rc)
return rc;

+ rc = interrupt_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ rc = interrupt_openall_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
phys_init_v1_hw(hisi_hba);

return 0;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/