Re: [PATCH V1 11/11] arm64, pci, acpi: Support for ACPI based PCI hostbridge init

From: Liviu . Dudau
Date: Wed Oct 28 2015 - 09:51:32 EST


On Wed, Oct 28, 2015 at 02:42:30PM +0100, Tomasz Nowicki wrote:
> On 28.10.2015 12:49, Liviu.Dudau@xxxxxxx wrote:
> >On Tue, Oct 27, 2015 at 05:38:42PM +0100, Tomasz Nowicki wrote:
> >>Because of two patch series:
> >>1. Jiang Liu's common interface to support PCI host bridge init
> >>2. Refactoring of MMCONFIG, part of this patch set
> >>now we can think about PCI buses enumeration for ARM64 and ACPI tables.
> >>
> >>This patch introduce ACPI based PCI hostbridge init calls which
> >>use information from MCFG table (PCI config space regions) and
> >>_CRS (IO/irq resources) to initialize PCI hostbridge.
> >>
> >>Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
> >>Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
> >>Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
> >>CC: Arnd Bergmann <arnd@xxxxxxxx>
> >>CC: Catalin Marinas <catalin.marinas@xxxxxxx>
> >>CC: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> >>CC: Lorenzo Pieralisi <Lorenzo.Pieralisi@xxxxxxx>
> >>CC: Will Deacon <will.deacon@xxxxxxx>
> >>---
> >> arch/arm64/Kconfig | 6 ++
> >> arch/arm64/kernel/pci.c | 208 +++++++++++++++++++++++++++++++++++++++++++++---
> >> 2 files changed, 202 insertions(+), 12 deletions(-)
> >>
> >>diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> >>index 07d1811..bbcc6b1 100644
> >>--- a/arch/arm64/Kconfig
> >>+++ b/arch/arm64/Kconfig
> >>@@ -89,6 +89,7 @@ config ARM64
> >> select SPARSE_IRQ
> >> select SYSCTL_EXCEPTION_TRACE
> >> select HAVE_CONTEXT_TRACKING
> >>+ select HAVE_PCI_ECAM
> >> help
> >> ARM 64-bit (AArch64) Linux support.
> >>
> >>@@ -202,6 +203,11 @@ source "drivers/pci/Kconfig"
> >> source "drivers/pci/pcie/Kconfig"
> >> source "drivers/pci/hotplug/Kconfig"
> >>
> >>+config PCI_MMCONFIG
> >>+ def_bool y
> >>+ select PCI_ECAM
> >>+ depends on ACPI
> >>+
> >> endmenu
> >>
> >> menu "Kernel Features"
> >>diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> >>index b3d098b..66cc1ae 100644
> >>--- a/arch/arm64/kernel/pci.c
> >>+++ b/arch/arm64/kernel/pci.c
> >>@@ -11,12 +11,15 @@
> >> */
> >>
> >> #include <linux/acpi.h>
> >>+#include <linux/ecam.h>
> >> #include <linux/init.h>
> >> #include <linux/io.h>
> >> #include <linux/kernel.h>
> >> #include <linux/mm.h>
> >>+#include <linux/of_address.h>
> >> #include <linux/of_pci.h>
> >> #include <linux/of_platform.h>
> >>+#include <linux/pci-acpi.h>
> >> #include <linux/slab.h>
> >>
> >> #include <asm/pci-bridge.h>
> >>@@ -52,35 +55,216 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
> >> }
> >>
> >> /*
> >>- * Try to assign the IRQ number from DT when adding a new device
> >>+ * Try to assign the IRQ number from DT/ACPI when adding a new device
> >> */
> >> int pcibios_add_device(struct pci_dev *dev)
> >> {
> >>- dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
> >>+ if (acpi_disabled)
> >>+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
> >>+#ifdef CONFIG_ACPI
> >>+ else
> >>+ acpi_pci_irq_enable(dev);
> >>+#endif
> >>
> >> return 0;
> >> }
> >>
> >>+#ifdef CONFIG_ACPI
> >>+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> >>+{
> >>+ struct acpi_pci_root *root = bridge->bus->sysdata;
> >>+
> >>+ ACPI_COMPANION_SET(&bridge->dev, root->device);
> >>+ return 0;
> >>+}
> >>+
> >>+void pcibios_add_bus(struct pci_bus *bus)
> >>+{
> >>+ acpi_pci_add_bus(bus);
> >>+}
> >>+
> >>+void pcibios_remove_bus(struct pci_bus *bus)
> >>+{
> >>+ acpi_pci_remove_bus(bus);
> >>+}
> >>+
> >>+static int __init pcibios_assign_resources(void)
> >>+{
> >>+ if (acpi_disabled)
> >>+ return 0;
> >>+
> >>+ pci_assign_unassigned_resources();
> >>+ return 0;
> >
> >You can change this function into:
> >{
> > if (!acpi_disabled)
> > pci_assign_unassigned_resources();
> >
> > return 0;
> >}
> >
> >as the equivalent but shorter form.
>
> Sure, will do.
>
> >
> >>+}
> >> /*
> >>- * raw_pci_read/write - Platform-specific PCI config space access.
> >>+ * rootfs_initcall comes after subsys_initcall and fs_initcall_sync,
> >>+ * so we know acpi scan and PCI_FIXUP_FINAL quirks have both run.
> >> */
> >>-int raw_pci_read(unsigned int domain, unsigned int bus,
> >>- unsigned int devfn, int reg, int len, u32 *val)
> >
> >What happened with raw_pci_{read,write} ? Why do you remove them?
>
> We do not need raw_pci_{read,write} any more, we will use empty
> raw_pci_{read,write} from mcfg.c introduced in patch 6/11.
>
> I think this is another candidate to split up, first I will remove these
> raw_pci_{read,write} accessors and then introduce ACPI PCI hostbridge init,
> it will be easier to review, what do you think?

Yes, I like that. If the calls were redundant after 6/11 then they should
not have been kept until this patch to be removed.

>
> >
> >
> >>+rootfs_initcall(pcibios_assign_resources);
> >
> >Would you be so kind and explain to me why you need this initcall?
> >Can you not set the PCI_REASSIGN_ALL_RSRC flag before calling
> >pci_scan_root_bus() ?
> >
> >I haven't focused on ACPI before so I'm a bit hazy on the init order when
> >that is enabled. That being said, I don't like adding in the architecture
> >code initcall hooks just to fix up some dependency orders that could / should
> >be fixed some other way.
>
> My idea was to defer resource reassigning to give a chance for running
> DECLARE_PCI_FIXUP_FINAL. I used DECLARE_PCI_FIXUP_FINAL to set
> IORESOURCE_PCI_FIXED for some PCI devices. Now I am not sure we need to
> defer it, my DECLARE_PCI_FIXUP_FINALs might be done in firmware, let me get
> back to you on this.

If fixups can be done in firmware then that is the preferred direction nowadays.

>
> >
> >>+
> >>+static void __iomem *
> >>+pci_mcfg_dev_base(struct pci_bus *bus, unsigned int devfn, int offset)
> >> {
> >>- return -ENXIO;
> >>+ struct pci_mmcfg_region *cfg;
> >>+
> >>+ cfg = pci_mmconfig_lookup(pci_domain_nr(bus), bus->number);
> >>+ if (cfg && cfg->virt)
> >>+ return cfg->virt +
> >>+ (PCI_MMCFG_BUS_OFFSET(bus->number) | (devfn << 12)) +
> >>+ offset;
> >>+ return NULL;
> >> }
> >>
> >>-int raw_pci_write(unsigned int domain, unsigned int bus,
> >>- unsigned int devfn, int reg, int len, u32 val)
> >>+struct pci_ops pci_root_ops = {
> >>+ .map_bus = pci_mcfg_dev_base,
> >>+ .read = pci_generic_config_read,
> >>+ .write = pci_generic_config_write,
> >>+};
> >>+
> >>+#ifdef CONFIG_PCI_MMCONFIG
> >>+static int pci_add_mmconfig_region(struct acpi_pci_root_info *ci)
> >> {
> >>- return -ENXIO;
> >>+ struct pci_mmcfg_region *cfg;
> >>+ struct acpi_pci_root *root;
> >>+ int seg, start, end, err;
> >>+
> >>+ root = ci->root;
> >>+ seg = root->segment;
> >>+ start = root->secondary.start;
> >>+ end = root->secondary.end;
> >>+
> >>+ cfg = pci_mmconfig_lookup(seg, start);
> >>+ if (cfg)
> >>+ return 0;
> >>+
> >>+ cfg = pci_mmconfig_alloc(seg, start, end, root->mcfg_addr);
> >>+ if (!cfg)
> >>+ return -ENOMEM;
> >>+
> >>+ err = pci_mmconfig_inject(cfg);
> >>+ return err;
> >> }
> >>
> >>-#ifdef CONFIG_ACPI
> >>+static void pci_remove_mmconfig_region(struct acpi_pci_root_info *ci)
> >>+{
> >>+ struct acpi_pci_root *root = ci->root;
> >>+ struct pci_mmcfg_region *cfg;
> >>+
> >>+ cfg = pci_mmconfig_lookup(root->segment, root->secondary.start);
> >>+ if (cfg)
> >>+ return;
> >>+
> >>+ if (cfg->hot_added)
> >>+ pci_mmconfig_delete(root->segment, root->secondary.start,
> >>+ root->secondary.end);
> >>+}
> >>+#else
> >>+static int pci_add_mmconfig_region(struct acpi_pci_root_info *ci)
> >>+{
> >>+ return 0;
> >>+}
> >>+
> >>+static void pci_remove_mmconfig_region(struct acpi_pci_root_info *ci) { }
> >>+#endif
> >>+
> >>+static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci)
> >>+{
> >>+ return pci_add_mmconfig_region(ci);
> >>+}
> >>+
> >>+static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
> >>+{
> >>+ pci_remove_mmconfig_region(ci);
> >>+ kfree(ci);
> >>+}
> >>+
> >>+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> >>+{
> >>+ struct resource_entry *entry, *tmp;
> >>+ int ret;
> >>+
> >>+ ret = acpi_pci_probe_root_resources(ci);
> >>+ if (ret < 0)
> >>+ return ret;
> >>+
> >>+ resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> >>+ struct resource *res = entry->res;
> >>+
> >>+ /*
> >>+ * Special handling for ARM IO range
> >
> >There is nothing ARM specific here. It should apply to any memory mapped IO range.
>
> OK, I will remove that comment.

Thanks!

Liviu

>
> >
> >>+ * TODO: need to move pci_register_io_range() function out
> >>+ * of drivers/of/address.c for both used by DT and ACPI
> >>+ */
> >>+ if (res->flags & IORESOURCE_IO) {
> >>+ unsigned long port;
> >>+ int err;
> >>+ resource_size_t length = res->end - res->start;
> >>+
> >>+ err = pci_register_io_range(res->start, length);
> >>+ if (err) {
> >>+ resource_list_destroy_entry(entry);
> >>+ continue;
> >>+ }
> >>+
> >>+ port = pci_address_to_pio(res->start);
> >>+ if (port == (unsigned long)-1) {
> >>+ resource_list_destroy_entry(entry);
> >>+ continue;
> >>+ }
> >>+
> >>+ res->start = port;
> >>+ res->end = res->start + length - 1;
> >>+
> >>+ if (pci_remap_iospace(res, res->start) < 0)
> >>+ resource_list_destroy_entry(entry);
> >>+ }
> >>+ }
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static struct acpi_pci_root_ops acpi_pci_root_ops = {
> >>+ .pci_ops = &pci_root_ops,
> >>+ .init_info = pci_acpi_root_init_info,
> >>+ .release_info = pci_acpi_root_release_info,
> >>+ .prepare_resources = pci_acpi_root_prepare_resources,
> >>+};
> >>+
> >> /* Root bridge scanning */
> >> struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> >> {
> >>- /* TODO: Should be revisited when implementing PCI on ACPI */
> >>- return NULL;
> >>+ int node = acpi_get_node(root->device->handle);
> >>+ int domain = root->segment;
> >>+ int busnum = root->secondary.start;
> >>+ struct acpi_pci_root_info *info;
> >>+ struct pci_bus *bus;
> >>+
> >>+ if (domain && !pci_domains_supported) {
> >>+ pr_warn("PCI %04x:%02x: multiple domains not supported.\n",
> >>+ domain, busnum);
> >>+ return NULL;
> >>+ }
> >>+
> >>+ info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
> >>+ if (!info) {
> >>+ dev_err(&root->device->dev,
> >>+ "pci_bus %04x:%02x: ignored (out of memory)\n",
> >>+ domain, busnum);
> >>+ return NULL;
> >>+ }
> >>+
> >>+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops, info, root);
> >>+
> >>+ /* After the PCI-E bus has been walked and all devices discovered,
> >>+ * configure any settings of the fabric that might be necessary.
> >>+ */
> >>+ if (bus) {
> >>+ struct pci_bus *child;
> >>+
> >>+ list_for_each_entry(child, &bus->children, node)
> >>+ pcie_bus_configure_settings(child);
> >>+ }
> >>+
> >>+ return bus;
> >> }
> >> #endif
> >>--
> >>1.9.1
> >>
> >
>

--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
Â\_(ã)_/Â
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/