Re: [PATCH v3 2/5] mfd: sec: Add support for S2MPS15 PMIC

From: Alim Akhtar
Date: Wed Oct 28 2015 - 07:31:03 EST


Hello,

On 10/28/2015 02:16 PM, Lee Jones wrote:
On Wed, 28 Oct 2015, Krzysztof Kozlowski wrote:

On 26.10.2015 23:34, Lee Jones wrote:
On Mon, 26 Oct 2015, Alim Akhtar wrote:

From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>

Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
clock outputs and battery charger. This patch adds initial support for
LDO and buck regulators of S2MPS15 device.

Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
[Alim: Added s2mps15_devs like rtc and clk and related changes]
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
drivers/mfd/sec-core.c | 31 +++++++
drivers/mfd/sec-irq.c | 8 ++
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/s2mps15.h | 158 +++++++++++++++++++++++++++++++++++
4 files changed, 198 insertions(+)
create mode 100644 include/linux/mfd/samsung/s2mps15.h

I replied to the previous set and won't be reviewing this one until
all of the open points are solved.

The naming and compatibles used by the driver are confusing but how it
was at beginning. Beside the confusion, the names are correct:

1. Main mfd driver:
- compatible: samsung,s2mps1*-pmic
- driver name: sec_pmic

2. Regulator driver:
- no compatible (because it always searches for "regulators" subnode of
its parent... that is the convention/legacy behaviour)
- driver name: s2mps1*-pmic

I hope that explains your concerns.

It explains *why*, but doesn't ease my concerns in any way.

Unfortunately I've only just realised the disparity we have between
MFD and the Regulator subsystem, which is annoying because it's now
almost impossible to rectify.

We should have taken one of two views. Either a) The MFD is the PMIC
device which encompasses regulator control. In which case the MFD
and it's corresponding compatible string would be named *-pmic and the
regulator driver would be called *-regulator. Or b) The MFD could be
considered a normal MFD and be named after the model number, then the
regulator 'could' be named *-pmic.

However, with reference to b), how much other Power Management does
the regulator driver do besides control regulators? I suspect not
much. Therefore my preference would be for a). My second choice
would be a mixuture of the two where nothing gets named *-pmic. The
last option on my list would be the current situation where we seem to
be calling both the MFD (PMIC) itself and the Regulator driver
*-pmic, which is not good.

Well, I would have also preferred option a), but keeping existing DT bindings, looks like we need to go with the current situation.
Krzysztof any thought on this?

diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 2626fc0b5b8c..db3d4d4ff805 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -29,6 +29,7 @@
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
@@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
}
};

+static const struct mfd_cell s2mps15_devs[] = {
+ {
+ .name = "s2mps15-pmic",
+ }, {
+ .name = "s2mps15-rtc",
+ }, {
+ .name = "s2mps15-clk",
+ .of_compatible = "samsung,s2mps15-clk",
+ },
+};
+
static const struct mfd_cell s2mpa01_devs[] = {
{
.name = "s2mpa01-pmic",
@@ -125,6 +137,9 @@ static const struct of_device_id sec_dt_match[] = {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
}, {
+ .compatible = "samsung,s2mps15-pmic",
+ .data = (void *)S2MPS15X,
+ }, {
.compatible = "samsung,s2mpa01-pmic",
.data = (void *)S2MPA01,
}, {
@@ -226,6 +241,15 @@ static const struct regmap_config s2mps14_regmap_config = {
.cache_type = REGCACHE_FLAT,
};

+static const struct regmap_config s2mps15_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS15_REG_LDODSCH4,
+ .volatile_reg = s2mps11_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s2mpu02_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -387,6 +411,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
case S2MPS14X:
regmap = &s2mps14_regmap_config;
break;
+ case S2MPS15X:
+ regmap = &s2mps15_regmap_config;
+ break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
break;
@@ -445,6 +472,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_devs = s2mps14_devs;
num_sec_devs = ARRAY_SIZE(s2mps14_devs);
break;
+ case S2MPS15X:
+ sec_devs = s2mps15_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps15_devs);
+ break;
case S2MPU02:
sec_devs = s2mpu02_devs;
num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 806fa8dbb22d..d77de431cc50 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
S2MPS1X_IRQ_CHIP_COMMON_DATA,
};

+static const struct regmap_irq_chip s2mps15_irq_chip = {
+ .name = "s2mps15",
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
static const struct regmap_irq_chip s2mpu02_irq_chip = {
.name = "s2mpu02",
.irqs = s2mpu02_irqs,
@@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
case S2MPS14X:
sec_irq_chip = &s2mps14_irq_chip;
break;
+ case S2MPS15X:
+ sec_irq_chip = &s2mps15_irq_chip;
+ break;
case S2MPU02:
sec_irq_chip = &s2mpu02_irq_chip;
break;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index a06098639399..6bc4bcd488ac 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -44,6 +44,7 @@ enum sec_device_type {
S2MPS11X,
S2MPS13X,
S2MPS14X,
+ S2MPS15X,
S2MPU02,
};

diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h
new file mode 100644
index 000000000000..36d35287c3c0
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps15.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_S2MPS15_H
+#define __LINUX_MFD_S2MPS15_H
+
+/* S2MPS15 registers */
+enum s2mps15_reg {
+ S2MPS15_REG_ID,
+ S2MPS15_REG_INT1,
+ S2MPS15_REG_INT2,
+ S2MPS15_REG_INT3,
+ S2MPS15_REG_INT1M,
+ S2MPS15_REG_INT2M,
+ S2MPS15_REG_INT3M,
+ S2MPS15_REG_ST1,
+ S2MPS15_REG_ST2,
+ S2MPS15_REG_PWRONSRC,
+ S2MPS15_REG_OFFSRC,
+ S2MPS15_REG_BU_CHG,
+ S2MPS15_REG_RTC_BUF,
+ S2MPS15_REG_CTRL1,
+ S2MPS15_REG_CTRL2,
+ S2MPS15_REG_RSVD1,
+ S2MPS15_REG_RSVD2,
+ S2MPS15_REG_RSVD3,
+ S2MPS15_REG_RSVD4,
+ S2MPS15_REG_RSVD5,
+ S2MPS15_REG_RSVD6,
+ S2MPS15_REG_CTRL3,
+ S2MPS15_REG_RSVD7,
+ S2MPS15_REG_RSVD8,
+ S2MPS15_REG_RSVD9,
+ S2MPS15_REG_B1CTRL1,
+ S2MPS15_REG_B1CTRL2,
+ S2MPS15_REG_B2CTRL1,
+ S2MPS15_REG_B2CTRL2,
+ S2MPS15_REG_B3CTRL1,
+ S2MPS15_REG_B3CTRL2,
+ S2MPS15_REG_B4CTRL1,
+ S2MPS15_REG_B4CTRL2,
+ S2MPS15_REG_B5CTRL1,
+ S2MPS15_REG_B5CTRL2,
+ S2MPS15_REG_B6CTRL1,
+ S2MPS15_REG_B6CTRL2,
+ S2MPS15_REG_B7CTRL1,
+ S2MPS15_REG_B7CTRL2,
+ S2MPS15_REG_B8CTRL1,
+ S2MPS15_REG_B8CTRL2,
+ S2MPS15_REG_B9CTRL1,
+ S2MPS15_REG_B9CTRL2,
+ S2MPS15_REG_B10CTRL1,
+ S2MPS15_REG_B10CTRL2,
+ S2MPS15_REG_BBCTRL1,
+ S2MPS15_REG_BBCTRL2,
+ S2MPS15_REG_BRAMP,
+ S2MPS15_REG_LDODVS1,
+ S2MPS15_REG_LDODVS2,
+ S2MPS15_REG_LDODVS3,
+ S2MPS15_REG_LDODVS4,
+ S2MPS15_REG_L1CTRL,
+ S2MPS15_REG_L2CTRL,
+ S2MPS15_REG_L3CTRL,
+ S2MPS15_REG_L4CTRL,
+ S2MPS15_REG_L5CTRL,
+ S2MPS15_REG_L6CTRL,
+ S2MPS15_REG_L7CTRL,
+ S2MPS15_REG_L8CTRL,
+ S2MPS15_REG_L9CTRL,
+ S2MPS15_REG_L10CTRL,
+ S2MPS15_REG_L11CTRL,
+ S2MPS15_REG_L12CTRL,
+ S2MPS15_REG_L13CTRL,
+ S2MPS15_REG_L14CTRL,
+ S2MPS15_REG_L15CTRL,
+ S2MPS15_REG_L16CTRL,
+ S2MPS15_REG_L17CTRL,
+ S2MPS15_REG_L18CTRL,
+ S2MPS15_REG_L19CTRL,
+ S2MPS15_REG_L20CTRL,
+ S2MPS15_REG_L21CTRL,
+ S2MPS15_REG_L22CTRL,
+ S2MPS15_REG_L23CTRL,
+ S2MPS15_REG_L24CTRL,
+ S2MPS15_REG_L25CTRL,
+ S2MPS15_REG_L26CTRL,
+ S2MPS15_REG_L27CTRL,
+ S2MPS15_REG_LDODSCH1,
+ S2MPS15_REG_LDODSCH2,
+ S2MPS15_REG_LDODSCH3,
+ S2MPS15_REG_LDODSCH4,
+};
+
+/* S2MPS15 regulator ids */
+enum s2mps15_regulators {
+ S2MPS15_LDO1,
+ S2MPS15_LDO2,
+ S2MPS15_LDO3,
+ S2MPS15_LDO4,
+ S2MPS15_LDO5,
+ S2MPS15_LDO6,
+ S2MPS15_LDO7,
+ S2MPS15_LDO8,
+ S2MPS15_LDO9,
+ S2MPS15_LDO10,
+ S2MPS15_LDO11,
+ S2MPS15_LDO12,
+ S2MPS15_LDO13,
+ S2MPS15_LDO14,
+ S2MPS15_LDO15,
+ S2MPS15_LDO16,
+ S2MPS15_LDO17,
+ S2MPS15_LDO18,
+ S2MPS15_LDO19,
+ S2MPS15_LDO20,
+ S2MPS15_LDO21,
+ S2MPS15_LDO22,
+ S2MPS15_LDO23,
+ S2MPS15_LDO24,
+ S2MPS15_LDO25,
+ S2MPS15_LDO26,
+ S2MPS15_LDO27,
+ S2MPS15_BUCK1,
+ S2MPS15_BUCK2,
+ S2MPS15_BUCK3,
+ S2MPS15_BUCK4,
+ S2MPS15_BUCK5,
+ S2MPS15_BUCK6,
+ S2MPS15_BUCK7,
+ S2MPS15_BUCK8,
+ S2MPS15_BUCK9,
+ S2MPS15_BUCK10,
+ S2MPS15_BUCK11,
+ S2MPS15_REGULATOR_MAX,
+};
+
+#define S2MPS15_LDO_VSEL_MASK (0x3F)
+#define S2MPS15_BUCK_VSEL_MASK (0xFF)
+
+#define S2MPS15_ENABLE_SHIFT (0x06)
+#define S2MPS15_ENABLE_MASK (0x03 << S2MPS15_ENABLE_SHIFT)
+
+#define S2MPS15_LDO_N_VOLTAGES (S2MPS15_LDO_VSEL_MASK + 1)
+#define S2MPS15_BUCK_N_VOLTAGES (S2MPS15_BUCK_VSEL_MASK + 1)
+
+#endif /* __LINUX_MFD_S2MPS15_H */



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/