[PATCH] md/raid5: fix locking in handle_stripe_clean_event()

From: Roman Gushchin
Date: Wed Oct 28 2015 - 04:53:28 EST


After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()")
__find_stripe() is called under conf->hash_locks + hash.
But handle_stripe_clean_event() calls remove_hash() under
conf->device_lock.

Under some cirscumstances the hash chain can be circuited,
and we get an infinite loop with disabled interrupts and locked hash
lock in __find_stripe(). This leads to hard lockup on multiple CPUs
and following system crash.

I was able to reproduce this behavior on raid6 over 6 ssd disks.
The devices_handle_discard_safely option should be set to enable trim
support. The following script was used:

for i in `seq 1 32`; do
dd if=/dev/zero of=large$i bs=10M count=100 &
done

Signed-off-by: Roman Gushchin <klamm@xxxxxxxxxxxxxx>
Cc: Neil Brown <neilb@xxxxxxx>
Cc: Shaohua Li <shli@xxxxxxxxxx>
Cc: linux-raid@xxxxxxxxxxxxxxx
Cc: <stable@xxxxxxxxxxxxxxx> # 3.10 - 3.19
---
drivers/md/raid5.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index e421016..5fa7549 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3060,6 +3060,8 @@ static void handle_stripe_clean_event(struct r5conf *conf,
}
if (!discard_pending &&
test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+ int hash = sh->hash_lock_index;
+
clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
if (sh->qd_idx >= 0) {
@@ -3073,9 +3075,9 @@ static void handle_stripe_clean_event(struct r5conf *conf,
* no updated data, so remove it from hash list and the stripe
* will be reinitialized
*/
- spin_lock_irq(&conf->device_lock);
+ spin_lock_irq(conf->hash_locks + hash);
remove_hash(sh);
- spin_unlock_irq(&conf->device_lock);
+ spin_unlock_irq(conf->hash_locks + hash);
if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
set_bit(STRIPE_HANDLE, &sh->state);

--
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/