Re: [PATCH v3 4/5] clk: s2mps15: Add support for S2MPS15 clocks

From: Krzysztof Kozlowski
Date: Tue Oct 27 2015 - 21:26:34 EST


On 26.10.2015 21:51, Alim Akhtar wrote:
> S2MPS15 PMIC has three 32k buffered clocks outputs. This patch
> adds supports for the same to the s2mps11 clock driver.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> ---
> drivers/clk/Kconfig | 5 +++--
> drivers/clk/clk-s2mps11.c | 24 ++++++++++++++++++++++++
> 2 files changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index a1fa61159179..037a314b5d76 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -120,9 +120,10 @@ config COMMON_CLK_S2MPS11
> tristate "Clock driver for S2MPS1X/S5M8767 MFD"
> depends on MFD_SEC_CORE
> ---help---
> - This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
> + This driver supports S2MPS1X/S5M8767 crystal oscillator
> clock. These multi-function devices have two (S2MPS14) or three
> - (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
> + (S2MPS11/S2MPS13/S2MPS15/S5M8767) fixed-rate oscillators,
> + clocked at 32KHz each.
>
> config CLK_TWL6040
> tristate "External McPDM functional clock from twl6040"
> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
> index d266299dfdb1..455500dca653 100644
> --- a/drivers/clk/clk-s2mps11.c
> +++ b/drivers/clk/clk-s2mps11.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/samsung/s2mps11.h>
> #include <linux/mfd/samsung/s2mps13.h>
> #include <linux/mfd/samsung/s2mps14.h>
> +#include <linux/mfd/samsung/s2mps15.h>
> #include <linux/mfd/samsung/s5m8767.h>
> #include <linux/mfd/samsung/core.h>
>
> @@ -148,6 +149,24 @@ static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
> },
> };
>
> +static struct clk_init_data s2mps15_clks_init[S2MPS11_CLKS_NUM] = {
> + [S2MPS11_CLK_AP] = {
> + .name = "s2mps15_ap",
> + .ops = &s2mps11_clk_ops,
> + .flags = CLK_IS_ROOT,
> + },
> + [S2MPS11_CLK_CP] = {
> + .name = "s2mps15_cp",
> + .ops = &s2mps11_clk_ops,
> + .flags = CLK_IS_ROOT,
> + },
> + [S2MPS11_CLK_BT] = {
> + .name = "s2mps15_bt",
> + .ops = &s2mps11_clk_ops,
> + .flags = CLK_IS_ROOT,
> + },
> +};
> +
> static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
> struct clk_init_data *clks_init)
> {
> @@ -207,6 +226,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
> s2mps11_reg = S2MPS14_REG_RTCCTRL;
> clks_init = s2mps14_clks_init;
> break;
> + case S2MPS15X:
> + s2mps11_reg = S2MPS15_REG_RTC_BUF;
> + clks_init = s2mps15_clks_init;

Another question (after looking at RTC driver):
Is this the same register address as S2MPS14?

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/