Re: [PATCH] EDAC: Add AMD Seattle SoC EDAC

From: Brijesh Singh
Date: Tue Oct 20 2015 - 13:01:22 EST


Hi Mark,

Thanks for review.

-Brijesh

On 10/19/2015 03:52 PM, Mark Rutland wrote:
> Hi,
>
> Please Cc the devicetree list (devicetree@xxxxxxxxxxxxxxx) when sending
> binding patches. I see you've added the people from the MAINTAINERS
> entry; the list should also be Cc'd.
>
Noted.
> On Mon, Oct 19, 2015 at 02:23:17PM -0500, Brijesh Singh wrote:
>> Add support for the AMD Seattle SoC EDAC driver.
>>
>> Signed-off-by: Brijesh Singh <brijeshkumar.singh@xxxxxxx>
>> ---
>> .../devicetree/bindings/edac/amd-seattle-edac.txt | 15 +
>> drivers/edac/Kconfig | 6 +
>> drivers/edac/Makefile | 1 +
>> drivers/edac/seattle_edac.c | 306 +++++++++++++++++++++
>> 4 files changed, 328 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/edac/amd-seattle-edac.txt
>> create mode 100644 drivers/edac/seattle_edac.c
>>
>> diff --git a/Documentation/devicetree/bindings/edac/amd-seattle-edac.txt b/Documentation/devicetree/bindings/edac/amd-seattle-edac.txt
>> new file mode 100644
>> index 0000000..a0354e8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/edac/amd-seattle-edac.txt
>> @@ -0,0 +1,15 @@
>> +* AMD Seattle SoC EDAC node
>> +
>> +EDAC node is defined to describe on-chip error detection and reporting.
>> +
>> +Required properties:
>> +- compatible: Should be "amd,arm-seattle-edac"
>> +- poll-delay-msec: Indicates how often the edac check callback should be called.
>> + Time in msec.
>
> This second property doesn't describe the hardware in any way. It should
> be runtime-configurable and dpesn't belong in the DT.
>
> Regardless, the binding is wrong. This is in no way specific to AMD
> Seattle, and per the code is actually used to imply the presence of a
> Cortex-A57 feature. No reference to AMD Seattle belongs in the DT
> binding (with the exception of the example, perhaps), nor in the driver.
>
> NAK while this pretends to be something that it isn't. At minimum, you
> need to correctly describe the feature you are trying to add support
> for.
>
I will remove AMD specific string in compatibility field and make the poll-delay-msec optional. Will also expose this as module parameter as you suggested below.

>> +
>> +Example:
>> + edac {
>> + compatible = "amd,arm-seattle-edac";
>> + poll-delay-msec = <100>;
>> + };
>> +
>> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
>> index ef25000..d342335 100644
>> --- a/drivers/edac/Kconfig
>> +++ b/drivers/edac/Kconfig
>> @@ -390,4 +390,10 @@ config EDAC_XGENE
>> Support for error detection and correction on the
>> APM X-Gene family of SOCs.
>>
>> +config EDAC_SEATTLE
>> + tristate "AMD Seattle EDAC"
>> + depends on EDAC_MM_EDAC && ARCH_SEATTLE
>> + help
>> + Support for error detection and correction on the
>> + AMD Seattle SOC.
>> endif # EDAC
>> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
>> index ae3c5f3..9e4f3ef 100644
>> --- a/drivers/edac/Makefile
>> +++ b/drivers/edac/Makefile
>> @@ -68,3 +68,4 @@ obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o
>> obj-$(CONFIG_EDAC_ALTERA_MC) += altera_edac.o
>> obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o
>> obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o
>> +obj-$(CONFIG_EDAC_SEATTLE) += seattle_edac.o
>> diff --git a/drivers/edac/seattle_edac.c b/drivers/edac/seattle_edac.c
>> new file mode 100644
>> index 0000000..78101aa
>> --- /dev/null
>> +++ b/drivers/edac/seattle_edac.c
>> @@ -0,0 +1,306 @@
>> +/*
>> + * AMD Seattle EDAC
>> + *
>> + * Copyright (c) 2015, Advanced Micro Devices
>> + * Author: Brijesh Singh <brijeshkumar.singh@xxxxxxx>
>> + *
>> + * The driver polls CPUMERRSR_EL1 and L2MERRSR_EL1 registers to logs the
>
> These are IMPLEMENTATION DEFINED registers which are specific to
> Cortex-A57, and I note that L2MERRSR_EL1 changed in r1p0.
>
> Which revisions of Cortex-A57 does this work with?
>
I have tested my code on r1p2.

> Generally we avoid touching IMPLEMENTATION DEFINED registers as they may
> not exist in some configurations or revisions, and could trap or undef.
> Is it always safe to access these registers (in current revisions of
> Cortex-A57)?
>
So far I have not ran into any trap error, was able to read/write registers from EL1 all the times. I looked at TRM but could not find reference that it would fail. As per doc the register should be available at all EL's except EL0.

>> + * non-fatal errors. Whereas the single bit and double bit ECC erros are
>> + * handled by firmware.
>
> I had expected this would be all be left for firmware, given that this
> feature may change in any revision of the CPU.
>
> What precisely does the AMD Seattle firmware do for double-bit ECC
> errors, and how is it triggered?
>
The error handling firmware is work in progress. I believe the approach is: Configure the platform to trigger a firmware handler when the error occurs, trusted firmware will receive the fatal error interrupt and take the action and will generate APEI objects; if error requires a SoC warm reset then it will communicate with SCP to warm reset the SoC. The SCP firmware will then need to provide the ACPI BERT error logging information back when the A57 restarts.

>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "edac_core.h"
>> +
>> +#define EDAC_MOD_STR "seattle_edac"
>> +
>> +#define CPUMERRSR_EL1_INDEX(x) ((x) & 0x1ffff)
>> +#define CPUMERRSR_EL1_BANK(x) (((x) >> 18) & 0x1f)
>> +#define CPUMERRSR_EL1_RAMID(x) (((x) >> 24) & 0x7f)
>> +#define CPUMERRSR_EL1_VALID(x) ((x) & (1 << 31))
>> +#define CPUMERRSR_EL1_REPEAT(x) (((x) >> 32) & 0x7f)
>> +#define CPUMERRSR_EL1_OTHER(x) (((x) >> 40) & 0xff)
>> +#define CPUMERRSR_EL1_FATAL(x) ((x) & (1UL << 63))
>> +
>> +#define L2MERRSR_EL1_INDEX(x) ((x) & 0x1ffff)
>> +#define L2MERRSR_EL1_CPUID(x) (((x) >> 18) & 0xf)
>> +#define L2MERRSR_EL1_RAMID(x) (((x) >> 24) & 0x7f)
>> +#define L2MERRSR_EL1_VALID(x) ((x) & (1 << 31))
>> +#define L2MERRSR_EL1_REPEAT(x) (((x) >> 32) & 0xff)
>> +#define L2MERRSR_EL1_OTHER(x) (((x) >> 40) & 0xff)
>> +#define L2MERRSR_EL1_FATAL(x) ((x) & (1UL << 63))
>> +
>> +struct seattle_edac {
>> + struct edac_device_ctl_info *edac_ctl;
>> +};
>> +
>> +static inline u64 read_cpumerrsr_el1(void)
>> +{
>> + u64 val;
>> +
>> + asm volatile("mrs %0, s3_1_c15_c2_2" : "=r" (val));
>> + return val;
>> +}
>> +
>> +static inline void write_cpumerrsr_el1(u64 val)
>> +{
>> + asm volatile("msr s3_1_c15_c2_2, %0" :: "r" (val));
>> +}
>> +
>> +static inline u64 read_l2merrsr_el1(void)
>> +{
>> + u64 val;
>> +
>> + asm volatile("mrs %0, s3_1_c15_c2_3" : "=r" (val));
>> + return val;
>> +}
>> +
>> +static inline void write_l2merrsr_el1(u64 val)
>> +{
>> + asm volatile("msr s3_1_c15_c2_3, %0" :: "r" (val));
>> +}
>> +
>> +static void check_l2merrsr_el1_error(struct edac_device_ctl_info *edac_ctl)
>> +{
>> + int fatal;
>> + int cpuid;
>> + u64 val = read_l2merrsr_el1();
>> +
>> + if (!L2MERRSR_EL1_VALID(val))
>> + return;
>> +
>> + fatal = L2MERRSR_EL1_FATAL(val);
>> + cpuid = L2MERRSR_EL1_CPUID(val);
>
> Per the spec this appears to be the physical index of the CPU within a
> cluster. So the logged messages aren't all that useful in a
> multi-cluster system.
>
> Additionally this isn't just the CPUID, which is why all the prints
> below look weird. Please split the field here rather than propagating it
> with a misleading name.
>
Noted.
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "CPU%d detected %s error on L2 (L2MERRSR=%#llx)!\n",
>> + smp_processor_id(), fatal ? "fatal" : "non-fatal", val);
>> +
>> + switch (L2MERRSR_EL1_RAMID(val)) {
>> + case 0x10:
>
> Define some macro mnemonics for these.
>
Noted.
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L2 Tag RAM cpu %d way %d\n", cpuid / 2, cpuid % 2);
>> + break;
>> + case 0x11:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L2 Data RAM cpu %d way %d\n", cpuid / 2, cpuid % 2);
>> + break;
>> + case 0x12:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L2 Snoop tag RAM cpu %d way %d\n",
>> + cpuid / 2, cpuid % 2);
>> + break;
>> + case 0x14:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L2 Dirty RAM cpu %d way %d\n",
>> + cpuid / 2, cpuid % 2);
>> + break;
>> + case 0x18:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L2 inclusion RAM cpu %d way %d\n",
>> + cpuid / 2, cpuid % 2);
>> + break;
>> + default:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "unknown RAMID cpuid %d\n", cpuid);
>> + break;
>> + }
>> +
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR, "Repeated error count: %d\n",
>> + (int)L2MERRSR_EL1_REPEAT(val));
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR, "Other error count: %d\n",
>> + (int)L2MERRSR_EL1_OTHER(val));
>> + if (fatal)
>> + edac_device_handle_ue(edac_ctl, smp_processor_id(), 1,
>> + edac_ctl->name);
>> + else
>> + edac_device_handle_ce(edac_ctl, smp_processor_id(), 1,
>> + edac_ctl->name);
>> + write_l2merrsr_el1(0);
>> +}
>> +
>> +static void check_cpumerrsr_el1_error(struct edac_device_ctl_info *edac_ctl)
>> +{
>> + int fatal;
>> + int bank;
>> + u64 val = read_cpumerrsr_el1();
>> +
>> + if (!CPUMERRSR_EL1_VALID(val))
>> + return;
>> +
>> + bank = CPUMERRSR_EL1_BANK(val);
>> + fatal = CPUMERRSR_EL1_FATAL(val);
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "CPU%d detected %s error on L1 (CPUMERRSR=%#llx)!\n",
>> + smp_processor_id(), fatal ? "fatal" : "non-fatal", val);
>> +
>> + switch (CPUMERRSR_EL1_RAMID(val)) {
>> + case 0x0:
>
> Mnemonics please.
>
Noted.
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L1-I Tag RAM bank %d\n", bank);
>> + break;
>> + case 0x1:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L1-I Data RAM bank %d\n", bank);
>> + break;
>> + case 0x8:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L1-D Tag RAM bank %d\n", bank);
>> + break;
>> + case 0x9:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L1-D Data RAM bank %d\n", bank);
>> + break;
>> + case 0x18:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "L2 TLB RAM bank %d\n", bank);
>> + break;
>> + default:
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR,
>> + "unknown ramid %d bank %d\n",
>> + (int)CPUMERRSR_EL1_RAMID(val), bank);
>> + break;
>> + }
>> +
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR, "Repeated error count: %d\n",
>> + (int)CPUMERRSR_EL1_REPEAT(val));
>> + edac_printk(KERN_CRIT, EDAC_MOD_STR, "Other error count: %d\n",
>> + (int)CPUMERRSR_EL1_OTHER(val));
>> + if (fatal)
>> + edac_device_handle_ue(edac_ctl, smp_processor_id(), 1,
>> + edac_ctl->name);
>> + else
>> + edac_device_handle_ce(edac_ctl, smp_processor_id(), 1,
>> + edac_ctl->name);
>> + write_cpumerrsr_el1(0);
>> +}
>> +
>> +static void cpu_check_errors(void *args)
>> +{
>> + struct edac_device_ctl_info *edev_ctl = args;
>> +
>> + check_cpumerrsr_el1_error(edev_ctl);
>> + check_l2merrsr_el1_error(edev_ctl);
>> +}
>> +
>> +static void edac_check_errors(struct edac_device_ctl_info *edev_ctl)
>> +{
>> + int cpu;
>> +
>> + /* read L1 and L2 memory error syndrome register on possible CPU's */
>
> Nit: get rid of the apostrophe
>
Noted.
>> + for_each_possible_cpu(cpu)
>> + smp_call_function_single(cpu, cpu_check_errors, edev_ctl, 0);
>
> This doesn't look right. Why are we cross-calling to other CPUs?
>
> As far as I can see, this is a per-cluster thing, so surely we should
> have a device per-cluster?
>
>> +}
>> +
>> +static int seattle_edac_probe(struct platform_device *pdev)
>> +{
>> + int rc;
>> + u32 poll_msec;
>> + struct seattle_edac *drv;
>> + struct device *dev = &pdev->dev;
>> +
>> + rc = of_property_read_u32(pdev->dev.of_node, "poll-delay-msec",
>> + &poll_msec);
>
> As stated above, this property does not belong in the DT.
>
> I see that this is a module; this can easily be a module parameter.
>
noted.

> Thanks,
> Mark.
>
>> + if (rc < 0) {
>> + edac_printk(KERN_ERR, EDAC_MOD_STR,
>> + "failed to get poll interval\n");
>> + return rc;
>> + }
>> +
>> + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
>> + if (!drv)
>> + return -ENOMEM;
>> +
>> + drv->edac_ctl = edac_device_alloc_ctl_info(0, "cpu",
>> + num_possible_cpus(), "L", 2,
>> + 1, NULL, 0,
>> + edac_device_alloc_index());
>> +
>> + drv->edac_ctl->poll_msec = poll_msec;
>> + drv->edac_ctl->edac_check = edac_check_errors;
>> + drv->edac_ctl->dev = dev;
>> + drv->edac_ctl->mod_name = dev_name(dev);
>> + drv->edac_ctl->dev_name = dev_name(dev);
>> + drv->edac_ctl->ctl_name = "cpu_err";
>> + drv->edac_ctl->panic_on_ue = 1;
>> + platform_set_drvdata(pdev, drv);
>> +
>> + rc = edac_device_add_device(drv->edac_ctl);
>> + if (rc)
>> + goto edac_alloc_failed;
>> +
>> + return 0;
>> +
>> +edac_alloc_failed:
>> + edac_device_free_ctl_info(drv->edac_ctl);
>> + return rc;
>> +}
>> +
>> +static int seattle_edac_remove(struct platform_device *pdev)
>> +{
>> + struct seattle_edac *drv = dev_get_drvdata(&pdev->dev);
>> + struct edac_device_ctl_info *edac_ctl = drv->edac_ctl;
>> +
>> + edac_device_del_device(edac_ctl->dev);
>> + edac_device_free_ctl_info(edac_ctl);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id seattle_edac_of_match[] = {
>> + { .compatible = "amd,arm-seattle-edac" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, seattle_edac_of_match);
>> +
>> +static struct platform_driver seattle_edac_driver = {
>> + .probe = seattle_edac_probe,
>> + .remove = seattle_edac_remove,
>> + .driver = {
>> + .name = "seattle-edac",
>> + .of_match_table = seattle_edac_of_match,
>> + },
>> +};
>> +
>> +static int __init seattle_edac_init(void)
>> +{
>> + int rc;
>> +
>> + /* we support poll method */
>> + edac_op_state = EDAC_OPSTATE_POLL;
>> +
>> + rc = platform_driver_register(&seattle_edac_driver);
>> + if (rc) {
>> + edac_printk(KERN_ERR, EDAC_MOD_STR,
>> + "EDAC fails to register\n");
>> + return rc;
>> + }
>> +
>> + return 0;
>> +}
>> +module_init(seattle_edac_init);
>> +
>> +static void __exit seattle_edac_exit(void)
>> +{
>> + platform_driver_unregister(&seattle_edac_driver);
>> +}
>> +module_exit(seattle_edac_exit);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Brijesh Singh <brijeshkumar.singh@xxxxxxx>");
>> +MODULE_DESCRIPTION("AMD Seattle EDAC driver");
>> --
>> 1.9.1
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/