[PATCH 3.14 63/79] staging: comedi: usbduxsigma: dont clobber ao_timer in command test

From: Greg Kroah-Hartman
Date: Sat Oct 17 2015 - 23:03:37 EST


3.14-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@xxxxxxxxx>

commit c04a1f17803e0d3eeada586ca34a6b436959bc20 upstream.

`devpriv->ao_timer` is used while an asynchronous command is running on
the AO subdevice. It also gets modified by the subdevice's `cmdtest`
handler for checking new asynchronous commands,
`usbduxsigma_ao_cmdtest()`, which is not correct as it's allowed to
check new commands while an old command is still running. Fix it by
moving the code which sets up `devpriv->ao_timer` into the subdevice's
`cmd` handler, `usbduxsigma_ao_cmd()`.

Note that the removed code in `usbduxsigma_ao_cmdtest()` checked that
`devpriv->ao_timer` did not end up less that 1, but that could not
happen due because `cmd->scan_begin_arg` or `cmd->convert_arg` had
already been range-checked.

Also note that we tested the `high_speed` variable in the old code, but
that is currently always 0 and means that we always use "scan" timing
(`cmd->scan_begin_src == TRIG_TIMER` and `cmd->convert_src == TRIG_NOW`)
and never "convert" (individual sample) timing (`cmd->scan_begin_src ==
TRIG_FOLLOW` and `cmd->convert_src == TRIG_TIMER`). The moved code
tests `cmd->convert_src` instead to decide whether "scan" or "convert"
timing is being used, although currently only "scan" timing is
supported.

Fixes: fb1ef622e7a3 ("staging: comedi: usbduxsigma: tidy up analog output command support")
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Reviewed-by: Bernd Porr <mail@xxxxxxxxxxxxxxx>
Reviewed-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>


---
drivers/staging/comedi/drivers/usbduxsigma.c | 41 +++++++++++----------------
1 file changed, 17 insertions(+), 24 deletions(-)

--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -951,10 +951,24 @@ static int usbduxsigma_ao_cmdtest(struct
if (err)
return 3;

- /* Step 4: fix up any arguments */
+ return 0;
+}
+
+static int usbduxsigma_ao_cmd(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct usbduxsigma_private *devpriv = dev->private;
+ struct comedi_cmd *cmd = &s->async->cmd;
+ int ret;
+ int i;
+
+ down(&devpriv->sem);
+
+ /* set current channel of the running acquisition to zero */
+ s->async->cur_chan = 0;

/* we count in timer steps */
- if (high_speed) {
+ if (cmd->convert_src == TRIG_TIMER) {
/* timing of the conversion itself: every 125 us */
devpriv->ao_timer = cmd->convert_arg / 125000;
} else {
@@ -964,12 +978,9 @@ static int usbduxsigma_ao_cmdtest(struct
*/
devpriv->ao_timer = cmd->scan_begin_arg / 1000000;
}
- if (devpriv->ao_timer < 1)
- err |= -EINVAL;
-
if (cmd->stop_src == TRIG_COUNT) {
/* not continuous, use counter */
- if (high_speed) {
+ if (cmd->convert_src == TRIG_TIMER) {
/* high speed also scans everything at once */
devpriv->ao_sample_count = cmd->stop_arg *
cmd->scan_end_arg;
@@ -988,24 +999,6 @@ static int usbduxsigma_ao_cmdtest(struct
devpriv->ao_sample_count = 0;
}

- if (err)
- return 4;
-
- return 0;
-}
-
-static int usbduxsigma_ao_cmd(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- struct usbduxsigma_private *devpriv = dev->private;
- struct comedi_cmd *cmd = &s->async->cmd;
- int ret;
- int i;
-
- down(&devpriv->sem);
-
- /* set current channel of the running acquisition to zero */
- s->async->cur_chan = 0;
for (i = 0; i < cmd->chanlist_len; ++i)
devpriv->ao_chanlist[i] = CR_CHAN(cmd->chanlist[i]);



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/