Re: [PATCH v2 1/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan

From: SÃren Brinkmann
Date: Mon Sep 14 2015 - 11:08:15 EST


Hi Shawn,

overall, it looks good to me. I have some questions though.

On Mon, 2015-09-14 at 02:29PM +0800, Shawn Lin wrote:
> This patch adds Generic PHY access for sdhci-of-arasan. Driver
> can get PHY handler from dt-binding, and power-on/init the PHY.
> Also we add pm ops for PHY here if CONFIG_PM_SLEEP is enabled.
> Currently, it's just mandatory for arasan,sdhci-5.1.
>
> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>
> Serise-changes: 2
> - Keep phy as a mandatory requirement for arasan,sdhci-5.1
>
> ---
>
> Changes in v2: None
>
> drivers/mmc/host/sdhci-of-arasan.c | 97 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 97 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 75379cb..2c13ef8 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -21,6 +21,7 @@
>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/phy/phy.h>
> #include "sdhci-pltfm.h"
>
> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
> @@ -35,6 +36,7 @@
> */
> struct sdhci_arasan_data {
> struct clk *clk_ahb;
> + struct phy *phy;
> };
>
> static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
> @@ -70,6 +72,62 @@ static struct sdhci_pltfm_data sdhci_arasan_pdata = {
>
> #ifdef CONFIG_PM_SLEEP
> /**
> + * sdhci_arasan_suspend_phy - Suspend phy method for the driver
> + * @phy: Handler of phy structure
> + * Returns 0 on success and error value on error
> + *
> + * Put the phy in a deactive state.
> + */
> +static int sdhci_arasan_suspend_phy(struct phy *phy)
> +{
> + int ret;
> +
> + ret = phy_exit(phy);
> + if (ret < 0)
> + goto err_phy_exit;
> +
> + ret = phy_power_off(phy);
> + if (ret < 0)
> + goto err_phy_pwr_off;
> +
> + return 0;
> +
> +err_phy_pwr_off:
> + phy_power_on(phy);
> +err_phy_exit:
> + phy_init(phy);

Just to confirm, are these actions in the error path correct? E.g.
if the power_off() call fails, is it safe to call power_on()? Isn't
the phy still powered on? (this would apply to other error paths too)

> + return ret;
> +}
> +
> +/**
> + * sdhci_arasan_resume_phy - Resume phy method for the driver
> + * @phy: Handler of phy structure
> + * Returns 0 on success and error value on error
> + *
> + * Put the phy in a active state.
> + */
> +static int sdhci_arasan_resume_phy(struct phy *phy)
> +{
> + int ret;
> +
> + ret = phy_power_on(phy);
> + if (ret < 0)
> + goto err_phy_pwr_on;
> +
> + ret = phy_init(phy);
> + if (ret < 0)
> + goto err_phy_init;
> +
> + return 0;
> +
> +err_phy_init:
> + phy_exit(phy);
> +err_phy_pwr_on:
> + phy_power_off(phy);
> + return ret;
> +}
> +
> +/**
> * sdhci_arasan_suspend - Suspend method for the driver
> * @dev: Address of the device structure
> * Returns 0 on success and error value on error
> @@ -91,6 +149,12 @@ static int sdhci_arasan_suspend(struct device *dev)
> clk_disable(pltfm_host->clk);
> clk_disable(sdhci_arasan->clk_ahb);
>
> + if (sdhci_arasan->phy) {
> + ret = sdhci_arasan_suspend_phy(sdhci_arasan->phy);
> + if (ret < 0)
> + return ret;
> + }
> +
> return 0;
> }
>
> @@ -122,6 +186,12 @@ static int sdhci_arasan_resume(struct device *dev)
> return ret;
> }
>
> + if (sdhci_arasan->phy) {
> + ret = sdhci_arasan_resume_phy(sdhci_arasan->phy);
> + if (ret < 0)
> + return ret;
> + }
> +
> return sdhci_resume_host(host);
> }
> #endif /* ! CONFIG_PM_SLEEP */
> @@ -166,6 +236,33 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> goto clk_dis_ahb;
> }
>
> + sdhci_arasan->phy = NULL;
> + if (of_device_is_compatible(pdev->dev.of_node,
> + "arasan,sdhci-5.1")) {
> + sdhci_arasan->phy = devm_phy_get(&pdev->dev,
> + "phy_arasan");
> + if (IS_ERR(sdhci_arasan->phy)) {
> + ret = -ENODEV;
> + dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
> + goto clk_dis_ahb;
> + }
> +
> + ret = phy_power_on(sdhci_arasan->phy);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "phy_power_on err.\n");
> + phy_power_off(sdhci_arasan->phy);
> + goto clk_dis_ahb;
> + }
> +
> + ret = phy_init(sdhci_arasan->phy);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "phy_init err.\n");
> + phy_exit(sdhci_arasan->phy);
> + phy_power_off(sdhci_arasan->phy);
> + goto clk_dis_ahb;
> + }
> + }

I assume you looked at options for having the error paths in a
consolidated location? I guess this may be the nicest solution since all
of this is in this conditional block?

Feel free to add my
Acked-by: SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>

SÃren
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/