[PATCH 3/6] Staging: iio: meter: Prefer using the BIT macro

From: Shraddha Barke
Date: Thu Sep 10 2015 - 00:14:35 EST


This patch replaces bit shifting on 1 with the BIT(x) macro
as it's extensively used by other function in this driver.

This was done with coccinelle:
@@ int g; @@

-(1 << g)
+BIT(g)

Signed-off-by: Shraddha Barke <shraddha.6596@xxxxxxxxx>
---
drivers/staging/iio/meter/ade7753.c | 8 ++++----
drivers/staging/iio/meter/ade7754.c | 6 +++---
drivers/staging/iio/meter/ade7758_core.c | 6 +++---
drivers/staging/iio/meter/ade7759.c | 8 ++++----
drivers/staging/iio/meter/ade7854.c | 6 +++---
5 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index ffc7f0d..3d2e50c 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -219,7 +219,7 @@ static int ade7753_reset(struct device *dev)
u16 val;

ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val);
- val |= 1 << 6; /* Software Chip Reset */
+ val |= BIT(6); /* Software Chip Reset */

return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val);
}
@@ -328,10 +328,10 @@ static int ade7753_set_irq(struct device *dev, bool enable)
goto error_ret;

if (enable)
- irqen |= 1 << 3; /* Enables an interrupt when a data is
+ irqen |= BIT(3); /* Enables an interrupt when a data is
present in the waveform register */
else
- irqen &= ~(1 << 3);
+ irqen &= ~BIT(3);

ret = ade7753_spi_write_reg_8(dev, ADE7753_IRQEN, irqen);

@@ -345,7 +345,7 @@ static int ade7753_stop_device(struct device *dev)
u16 val;

ade7753_spi_read_reg_16(dev, ADE7753_MODE, &val);
- val |= 1 << 4; /* AD converters can be turned off */
+ val |= BIT(4); /* AD converters can be turned off */

return ade7753_spi_write_reg_16(dev, ADE7753_MODE, val);
}
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index f12b2e5..8552c76 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -223,7 +223,7 @@ static int ade7754_reset(struct device *dev)
if (ret < 0)
return ret;

- val |= 1 << 6; /* Software Chip Reset */
+ val |= BIT(6); /* Software Chip Reset */
return ade7754_spi_write_reg_8(dev, ADE7754_OPMODE, val);
}

@@ -350,10 +350,10 @@ static int ade7754_set_irq(struct device *dev, bool enable)
goto error_ret;

if (enable)
- irqen |= 1 << 14; /* Enables an interrupt when a data is
+ irqen |= BIT(14); /* Enables an interrupt when a data is
present in the waveform register */
else
- irqen &= ~(1 << 14);
+ irqen &= ~BIT(14);

ret = ade7754_spi_write_reg_16(dev, ADE7754_IRQEN, irqen);
if (ret)
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index 77141ae..3883808 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -308,7 +308,7 @@ static int ade7758_reset(struct device *dev)
dev_err(dev, "Failed to read opmode reg\n");
return ret;
}
- val |= 1 << 6; /* Software Chip Reset */
+ val |= BIT(6); /* Software Chip Reset */
ret = ade7758_spi_write_reg_8(dev, ADE7758_OPMODE, val);
if (ret < 0)
dev_err(dev, "Failed to write opmode reg\n");
@@ -426,10 +426,10 @@ int ade7758_set_irq(struct device *dev, bool enable)
goto error_ret;

if (enable)
- irqen |= 1 << 16; /* Enables an interrupt when a data is
+ irqen |= BIT(16); /* Enables an interrupt when a data is
present in the waveform register */
else
- irqen &= ~(1 << 16);
+ irqen &= ~BIT(16);

ret = ade7758_spi_write_reg_24(dev, ADE7758_MASK, irqen);
if (ret)
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index dbceda1..23e7392 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -224,7 +224,7 @@ static int ade7759_reset(struct device *dev)
if (ret < 0)
return ret;

- val |= 1 << 6; /* Software Chip Reset */
+ val |= BIT(6); /* Software Chip Reset */
return ade7759_spi_write_reg_16(dev,
ADE7759_MODE,
val);
@@ -288,10 +288,10 @@ static int ade7759_set_irq(struct device *dev, bool enable)
goto error_ret;

if (enable)
- irqen |= 1 << 3; /* Enables an interrupt when a data is
+ irqen |= BIT(3); /* Enables an interrupt when a data is
present in the waveform register */
else
- irqen &= ~(1 << 3);
+ irqen &= ~BIT(3);

ret = ade7759_spi_write_reg_8(dev, ADE7759_IRQEN, irqen);

@@ -314,7 +314,7 @@ static int ade7759_stop_device(struct device *dev)
return ret;
}

- val |= 1 << 4; /* AD converters can be turned off */
+ val |= BIT(4); /* AD converters can be turned off */

return ade7759_spi_write_reg_16(dev, ADE7759_MODE, val);
}
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index d620bbd..a838835 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -181,7 +181,7 @@ static int ade7854_reset(struct device *dev)
u16 val;

st->read_reg_16(dev, ADE7854_CONFIG, &val);
- val |= 1 << 7; /* Software Chip Reset */
+ val |= BIT(7); /* Software Chip Reset */

return st->write_reg_16(dev, ADE7854_CONFIG, val);
}
@@ -420,10 +420,10 @@ static int ade7854_set_irq(struct device *dev, bool enable)
goto error_ret;

if (enable)
- irqen |= 1 << 17; /* 1: interrupt enabled when all periodical
+ irqen |= BIT(17); /* 1: interrupt enabled when all periodical
(at 8 kHz rate) DSP computations finish. */
else
- irqen &= ~(1 << 17);
+ irqen &= ~BIT(17);

ret = st->write_reg_32(dev, ADE7854_MASK0, irqen);
if (ret)
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/