Re: eata fails to load on post 4.2 kernels
From: Arthur Marsh
Date: Tue Sep 08 2015 - 02:33:42 EST
Jiang Liu wrote on 08/09/15 14:49:
Hi Auhur,
Could you please help to apply the test patch
against the latest mainstream linux kernel?
Thanks!
Gerry
Done, and it appears to work properly thanks!
Arthur.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0+ (root@victoria) (gcc version 5.2.1 20150903 (Debian 5.2.1-16) ) #30 SMP PREEMPT Tue Sep 8 15:10:49 ACST 2015
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503 12/06/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x35c00000-0x35ffffff]
[ 0.000000] [mem 0x35c00000-0x35ffffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x35bfffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x35bfffff] page 4M
[ 0.000000] init_memory_mapping: [mem 0x36000000-0x377fdfff]
[ 0.000000] [mem 0x36000000-0x373fffff] page 4M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x02075000, 0x02075fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3614c000-0x3709dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 12000506 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 12000506 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347 A0347001 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: FACS 0x000000003FFBE000 000040
[ 0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I OEMAPIC 12000506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I AMI_OEM 12000506 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x02076000, 0x02076fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000003ffaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ffaffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[ 0.000000] On node 0 totalpages: 261966
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1962 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34738 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f5f00000 s41320 r0 d32408 u73728
[ 0.000000] pcpu-alloc: s41320 r0 d32408 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro single
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1004592K/1047864K available (5476K kernel code, 550K rwdata, 2080K rodata, 520K init, 8152K bss, 43272K reserved, 0K cma-reserved, 138952K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17ee000 - 0xc1870000 ( 520 kB)
.data : 0xc155957a - 0xc17ecb00 (2637 kB)
.text : 0xc1000000 - 0xc155957a (5477 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f5816000 soft=f5818000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1344 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2000.150 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008117] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.30 BogoMIPS (lpj=8000600)
[ 0.008233] pid_max: default: 32768 minimum: 301
[ 0.008342] ACPI: Core revision 20150818
[ 0.019015] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.019238] Security Framework initialized
[ 0.019297] AppArmor: AppArmor disabled by boot time parameter
[ 0.019355] Yama: becoming mindful.
[ 0.019478] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.019539] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020912] Initializing cgroup subsys blkio
[ 0.021002] Initializing cgroup subsys memory
[ 0.021082] Initializing cgroup subsys devices
[ 0.021170] Initializing cgroup subsys freezer
[ 0.021285] Initializing cgroup subsys net_cls
[ 0.021347] Initializing cgroup subsys perf_event
[ 0.021408] Initializing cgroup subsys net_prio
[ 0.021502] mce: CPU supports 5 MCE banks
[ 0.021593] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.021652] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.027467] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 2f, stepping: 02)
[ 0.064000] Performance Events: AMD PMU driver.
[ 0.064000] ... version: 0
[ 0.064000] ... bit width: 48
[ 0.064000] ... generic registers: 4
[ 0.064000] ... value mask: 0000ffffffffffff
[ 0.064000] ... max period: 00007fffffffffff
[ 0.064000] ... fixed-purpose events: 0
[ 0.064000] ... event mask: 000000000000000f
[ 0.084064] x86: Booted up 1 node, 1 CPUs
[ 0.084124] smpboot: Total of 1 processors activated (4000.30 BogoMIPS)
[ 0.084890] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089015] devtmpfs: initialized
[ 0.092175] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes)
[ 0.092518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.096120] pinctrl core: initialized pinctrl subsystem
[ 0.097194] NET: Registered protocol family 16
[ 0.108042] cpuidle: using governor ladder
[ 0.120018] cpuidle: using governor menu
[ 0.120080] node 0 link 0: io port [1000, ffffff]
[ 0.120085] TOM: 0000000040000000 aka 1024M
[ 0.120143] node 0 link 0: mmio [a0000, bffff]
[ 0.120148] node 0 link 0: mmio [40000000, ffffffff]
[ 0.120153] bus: [bus 00-ff] on node 0 link 0
[ 0.120155] bus: 00 [io 0x0000-0xffff]
[ 0.120158] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.120160] bus: 00 [mem 0x40000000-0xffffffff]
[ 0.120277] ACPI: bus type PCI registered
[ 0.120335] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.121261] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.121320] PCI: Using configuration type 1 for base access
[ 0.156182] ACPI: Added _OSI(Module Device)
[ 0.156242] ACPI: Added _OSI(Processor Device)
[ 0.156300] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.156357] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164807] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.171130] ACPI: Interpreter enabled
[ 0.171209] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[ 0.171366] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150818/hwxface-580)
[ 0.171576] ACPI: (supports S0 S1 S4 S5)
[ 0.171633] ACPI: Using IOAPIC for interrupt routing
[ 0.171781] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.196572] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.196644] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.196809] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.197070] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.197074] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.197077] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.197081] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.197084] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff window] (ignored)
[ 0.197087] PCI: root bus 00: hardware-probed resources
[ 0.197152] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.198339] PCI host bridge to bus 0000:00
[ 0.198398] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198457] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.198517] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.198578] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff]
[ 0.198728] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[ 0.198762] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.199458] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[ 0.199833] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[ 0.200193] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[ 0.200567] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[ 0.200916] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[ 0.201268] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[ 0.201337] pci 0000:00:01.0: supports D1
[ 0.201650] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[ 0.201718] pci 0000:00:0f.0: reg 0x20: [io 0xfc00-0xfc0f]
[ 0.201746] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.201807] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.201867] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.201927] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.202283] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[ 0.202350] pci 0000:00:10.0: reg 0x20: [io 0xec00-0xec1f]
[ 0.202400] pci 0000:00:10.0: supports D1 D2
[ 0.202403] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202687] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.202926] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[ 0.202993] pci 0000:00:10.1: reg 0x20: [io 0xe880-0xe89f]
[ 0.203042] pci 0000:00:10.1: supports D1 D2
[ 0.203045] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203206] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.203446] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[ 0.203513] pci 0000:00:10.2: reg 0x20: [io 0xe800-0xe81f]
[ 0.203563] pci 0000:00:10.2: supports D1 D2
[ 0.203566] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203727] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.203965] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[ 0.204041] pci 0000:00:10.3: reg 0x20: [io 0xe480-0xe49f]
[ 0.204091] pci 0000:00:10.3: supports D1 D2
[ 0.204094] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204258] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.204500] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[ 0.204534] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff]
[ 0.204623] pci 0000:00:10.4: supports D1 D2
[ 0.204626] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.204789] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.205033] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[ 0.205455] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[ 0.205816] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[ 0.205846] pci 0000:00:12.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.205859] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff]
[ 0.205938] pci 0000:00:12.0: supports D1 D2
[ 0.205942] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.206104] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.206346] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[ 0.206672] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400
[ 0.206875] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.207129] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.207435] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.207736] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.208045] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.208465] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208527] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.208533] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.208539] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.208557] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
[ 0.208585] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.208595] pci 0000:01:00.0: reg 0x14: [io 0xc000-0xc0ff]
[ 0.208605] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff]
[ 0.208637] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref]
[ 0.208672] pci 0000:01:00.0: supports D1 D2
[ 0.208832] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
[ 0.208855] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref]
[ 0.208865] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff]
[ 0.208932] pci 0000:01:00.1: supports D1 D2
[ 0.209282] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.209366] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400
[ 0.209444] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.209508] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.209748] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400
[ 0.209825] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.210053] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.210299] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.210495] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.210695] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.210757] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.210762] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.210804] pci 0000:05:0b.0: [1102:0004] type 00 class 0x040100
[ 0.210833] pci 0000:05:0b.0: reg 0x10: [io 0xd800-0xd83f]
[ 0.210925] pci 0000:05:0b.0: supports D1 D2
[ 0.211084] pci 0000:05:0b.1: [1102:7003] type 00 class 0x098000
[ 0.211111] pci 0000:05:0b.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.211202] pci 0000:05:0b.1: supports D1 D2
[ 0.211361] pci 0000:05:0b.2: [1102:4001] type 00 class 0x0c0010
[ 0.211392] pci 0000:05:0b.2: reg 0x10: [mem 0xff5ef800-0xff5effff]
[ 0.211406] pci 0000:05:0b.2: reg 0x14: [mem 0xff5e8000-0xff5ebfff]
[ 0.211492] pci 0000:05:0b.2: supports D1 D2
[ 0.211495] pci 0000:05:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.211695] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000
[ 0.211716] pci 0000:05:0c.0: reg 0x10: [io 0xd880-0xd89f]
[ 0.211778] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref]
[ 0.211992] pci_bus 0000:00: on NUMA node 0
[ 0.214732] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.215474] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.216171] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.216885] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.217601] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.218409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.220060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.221736] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.221796] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.221873] vgaarb: loaded
[ 0.221928] vgaarb: bridge control possible 0000:01:00.0
[ 0.224045] PCI: Using ACPI for IRQ routing
[ 0.224107] PCI: pci_cache_line_size set to 64 bytes
[ 0.224211] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.224223] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[ 0.225541] clocksource: Switched to clocksource refined-jiffies
[ 0.245728] pnp: PnP ACPI init
[ 0.246136] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247382] pnp 00:01: [dma 3]
[ 0.247727] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.248079] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.248220] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248645] system 00:03: [io 0x03e0-0x03e7] has been reserved
[ 0.248707] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.248768] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.248828] system 00:03: [io 0x0400-0x041f] has been reserved
[ 0.248890] system 00:03: [mem 0xff780000-0xffffffff] has been reserved
[ 0.248952] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.249017] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249299] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.249362] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249427] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249613] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.249842] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.250462] pnp 00:07: [dma 0 disabled]
[ 0.250641] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.250857] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.250922] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251555] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251619] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.251682] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.251747] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.252115] pnp: PnP ACPI: found 10 devices
[ 0.294786] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.294888] clocksource: Switched to clocksource acpi_pm
[ 0.294987] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.295048] pci 0000:00:01.0: bridge window [io 0xa000-0xcfff]
[ 0.295112] pci 0000:00:01.0: bridge window [mem 0xff400000-0xff4fffff]
[ 0.295112] pci 0000:00:01.0: bridge window [mem 0x7ff00000-0xbfefffff pref]
[ 0.295112] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.295112] pci 0000:02:00.1: PCI bridge to [bus 04]
[ 0.295112] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[ 0.295112] pci 0000:00:13.1: PCI bridge to [bus 05]
[ 0.295112] pci 0000:00:13.1: bridge window [io 0xd000-0xdfff]
[ 0.295112] pci 0000:00:13.1: bridge window [mem 0xff500000-0xff5fffff]
[ 0.295112] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.295112] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.295112] pci_bus 0000:00: resource 6 [mem 0x40000000-0xffffffff]
[ 0.295112] pci_bus 0000:01: resource 0 [io 0xa000-0xcfff]
[ 0.295112] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.295112] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref]
[ 0.295112] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.295112] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.295112] NET: Registered protocol family 2
[ 0.295112] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.295112] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.295629] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.295807] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.295945] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.296339] NET: Registered protocol family 1
[ 0.296436] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.296517] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.296747] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.296773] PCI: CLS 64 bytes, default 64
[ 0.297128] Unpacking initramfs...
[ 0.796996] Freeing initrd memory: 15688K (f614c000 - f709e000)
[ 0.797204] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd4bbf1856, max_idle_ns: 440795275534 ns
[ 0.797348] microcode: AMD CPU family 0xf not supported
[ 0.798533] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.798693] audit: initializing netlink subsys (disabled)
[ 0.798860] audit: type=2000 audit(1441693489.795:1): initialized
[ 0.799863] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.800382] VFS: Disk quotas dquot_6.6.0
[ 0.800473] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.803294] bounce: pool size: 64 pages
[ 0.803386] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.807641] io scheduler noop registered
[ 0.807701] io scheduler deadline registered
[ 0.807782] io scheduler cfq registered (default)
[ 0.808442] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.808524] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808708] GHES: HEST is not enabled!
[ 0.808927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.829827] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.831661] Linux agpgart interface v0.103
[ 0.831755] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[ 0.838890] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.839777] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.840568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.841189] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.841816] mousedev: PS/2 mouse device common for all mice
[ 0.842304] rtc_cmos 00:00: RTC can wake from S4
[ 0.842836] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.842934] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[ 0.843406] NET: Registered protocol family 10
[ 0.848427] mip6: Mobile IPv6
[ 0.848516] NET: Registered protocol family 17
[ 0.848584] mpls_gso: MPLS GSO support
[ 0.849123] Using IPI No-Shortcut mode
[ 0.849737] registered taskstats version 1
[ 0.859309] rtc_cmos 00:00: setting system clock to 2015-09-08 06:24:51 UTC (1441693491)
[ 0.859662] PM: Hibernation image not present or could not be loaded.
[ 0.860719] Freeing unused kernel memory: 520K (c17ee000 - c1870000)
[ 0.860900] Write protecting the kernel text: 5480k
[ 0.861117] Write protecting the kernel read-only data: 2084k
[ 0.864921] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.953923] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.102293] SCSI subsystem initialized
[ 1.107581] ACPI: bus type USB registered
[ 1.107758] usbcore: registered new interface driver usbfs
[ 1.107952] usbcore: registered new interface driver hub
[ 1.115170] usbcore: registered new device driver usb
[ 1.117812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.118607] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.119304] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.119734] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.119914] uhci_hcd 0000:00:10.0: detected 2 ports
[ 1.121064] ehci-pci: EHCI PCI platform driver
[ 1.122550] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
[ 1.126031] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.126882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.126944] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.127015] usb usb1: Product: UHCI Host Controller
[ 1.127073] usb usb1: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.127131] usb usb1: SerialNumber: 0000:00:10.0
[ 1.136197] libata version 3.00 loaded.
[ 1.138056] hub 1-0:1.0: USB hub found
[ 1.138657] hub 1-0:1.0: 2 ports detected
[ 1.152832] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 1.152950] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[ 1.153045] ehci-pci 0000:00:10.4: debug port 1
[ 1.153259] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00
[ 1.164144] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.164544] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.164605] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.164676] usb usb2: Product: EHCI Host Controller
[ 1.164733] usb usb2: Manufacturer: Linux 4.2.0+ ehci_hcd
[ 1.164791] usb usb2: SerialNumber: 0000:00:10.4
[ 1.165797] hub 2-0:1.0: USB hub found
[ 1.165916] hub 2-0:1.0: 8 ports detected
[ 1.188392] hub 1-0:1.0: USB hub found
[ 1.188531] hub 1-0:1.0: 2 ports detected
[ 1.190621] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e000, 00:13:d4:cc:9b:57, IRQ 23
[ 1.191468] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[ 1.191721] pata_via 0000:00:0f.0: version 0.3.4
[ 1.196725] firewire_ohci 0000:05:0b.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.200263] scsi host0: pata_via
[ 1.207495] scsi host1: pata_via
[ 1.207806] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.207867] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.208899] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.208976] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.209056] uhci_hcd 0000:00:10.1: detected 2 ports
[ 1.209138] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
[ 1.209370] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.209431] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.209501] usb usb3: Product: UHCI Host Controller
[ 1.209559] usb usb3: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.209617] usb usb3: SerialNumber: 0000:00:10.1
[ 1.210356] hub 3-0:1.0: USB hub found
[ 1.210436] hub 3-0:1.0: 2 ports detected
[ 1.211224] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.211322] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.211403] uhci_hcd 0000:00:10.2: detected 2 ports
[ 1.211506] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 1.211747] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.211808] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.211878] usb usb4: Product: UHCI Host Controller
[ 1.211936] usb usb4: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.211994] usb usb4: SerialNumber: 0000:00:10.2
[ 1.213818] hub 4-0:1.0: USB hub found
[ 1.215221] hub 4-0:1.0: 2 ports detected
[ 1.217916] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.217994] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.218073] uhci_hcd 0000:00:10.3: detected 2 ports
[ 1.218180] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[ 1.223539] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.223605] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.223676] usb usb5: Product: UHCI Host Controller
[ 1.223734] usb usb5: Manufacturer: Linux 4.2.0+ uhci_hcd
[ 1.223792] usb usb5: SerialNumber: 0000:00:10.3
[ 1.227606] hub 5-0:1.0: USB hub found
[ 1.228956] hub 5-0:1.0: 2 ports detected
[ 1.381710] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[ 1.381777] ata1.00: 625142448 sectors, multi 16: LBA48
[ 1.389259] ata1.00: configured for UDMA/100
[ 1.394803] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[ 1.476046] usb 2-5: new high-speed USB device number 2 using ehci-pci
[ 1.568360] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[ 1.568789] ata2.01: HPA detected: current 66055248, native 78242976
[ 1.568850] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[ 1.568909] ata2.01: 66055248 sectors, multi 16: LBA
[ 1.568972] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 1.584227] ata2.00: configured for UDMA/33
[ 1.600609] ata2.01: configured for UDMA/33
[ 1.618159] usb 2-5: New USB device found, idVendor=13fe, idProduct=1e23
[ 1.618220] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.618285] usb 2-5: Product: STORE N GO
[ 1.618341] usb 2-5: Manufacturer: Verbatim
[ 1.618398] usb 2-5: SerialNumber: 078A18B40293
[ 1.625593] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[ 1.637515] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.637755] sd 0:0:0:0: [sda] Write Protect is off
[ 1.637815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.637884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.644999] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP4002H 0-57 PQ: 0 ANSI: 5
[ 1.646064] sd 1:0:1:0: [sdb] 66055248 512-byte logical blocks: (33.8 GB/31.4 GiB)
[ 1.646297] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.646357] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.646425] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.673945] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.677373] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.691745] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.692226] sdb: p3 size 13333950 extends beyond EOD, enabling native capacity
[ 1.692469] ata2: soft resetting link
[ 1.697121] firewire_core 0000:05:0b.2: created device fw0: GUID 00023c0153000612, S400
[ 1.864602] ata2.01: n_sectors mismatch 66055248 != 78242976
[ 1.864666] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 1.888227] ata2.00: configured for UDMA/33
[ 1.904607] ata2.01: configured for UDMA/33
[ 1.906810] ata2: EH complete
[ 1.907559] sd 1:0:1:0: [sdb] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 1.909995] sdb: detected capacity change from 33820286976 to 40060403712
[ 1.967146] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sdb3
[ 1.970506] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.972291] uas: Unknown symbol usb_stor_adjust_quirks (err 0)
[ 1.972405] uas: Unknown symbol usb_stor_sense_invalidCDB (err 0)
[ 1.992247] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.992327] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.993776] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.761777] random: nonblocking pool is initialized
[ 4.128489] floppy0: no floppy controllers found
[ 4.158994] PM: Starting manual resume from disk
[ 4.159079] PM: Hibernation image partition 8:5 present
[ 4.159082] PM: Looking for hibernation image.
[ 4.159913] PM: Image not found (code -22)
[ 4.159917] PM: Hibernation image not present or could not be loaded.
[ 4.167579] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 4.167586] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.167591] PM: Basic memory bitmaps created
[ 4.168339] PM: Basic memory bitmaps freed
[ 4.508791] EXT4-fs (sda7): mounting ext3 file system using the ext4 subsystem
[ 4.558918] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 8.755827] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 8.755914] ACPI: Sleep Button [SLPB]
[ 8.756257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 8.756333] ACPI: Power Button [PWRB]
[ 8.756590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.756663] ACPI: Power Button [PWRF]
[ 8.979757] parport_pc 00:01: reported by Plug and Play ACPI
[ 8.980287] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 8.983791] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.145307] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.145523] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.145756] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 9.842690] EDAC MC: Ver: 3.0.0
[ 9.938945] MCE: In-kernel MCE decoding enabled.
[ 9.987840] AMD64 EDAC driver v3.4.0
[ 9.987968] EDAC amd64: DRAM ECC enabled.
[ 9.992274] EDAC amd64: K8 revE or earlier detected (node 0).
[ 9.993671] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 9.996496] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 9.996573] EDAC amd64: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK!
[ 10.011464] gameport gameport0: EMU10K1 is pci0000:05:0b.1/gameport0, io 0xdc00, speed 1209kHz
[ 10.298592] [drm] Initialized drm 1.1.0 20060810
[ 10.302998] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.681026] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[ 10.681090] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[ 10.681148] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 10.682023] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[ 10.740633] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.865368] ppdev: user-space parallel port driver
[ 11.315791] snd_emu10k1 0000:05:0b.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
[ 11.403554] [drm] radeon kernel modesetting enabled.
[ 11.411892] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050).
[ 11.412113] [drm] register mmio base: 0xFF4F0000
[ 11.412171] [drm] register mmio size: 65536
[ 11.413441] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 11.413523] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 11.413681] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 11.413786] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[ 11.413847] [drm] Generation 2 PCI interface, using max accessible memory
[ 11.413910] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 11.414044] [drm] Detected VRAM RAM=256M, BAR=256M
[ 11.414102] [drm] RAM width 128bits DDR
[ 11.421782] [TTM] Zone kernel: Available graphics memory: 440924 kiB
[ 11.421848] [TTM] Zone highmem: Available graphics memory: 510400 kiB
[ 11.421907] [TTM] Initializing pool allocator
[ 11.422020] [TTM] Initializing DMA pool allocator
[ 11.423233] [drm] radeon: 256M of VRAM memory ready
[ 11.423294] [drm] radeon: 256M of GTT memory ready.
[ 11.423551] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 11.426998] radeon 0000:01:00.0: WB disabled
[ 11.427066] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf8022000
[ 11.427147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.427206] [drm] Driver supports precise vblank timestamp query.
[ 11.427453] [drm] radeon: irq initialized.
[ 11.427571] [drm] Loading R300 Microcode
[ 11.557976] [drm] radeon: ring at 0x00000000D0001000
[ 11.558181] [drm] ring test succeeded in 0 usecs
[ 11.559087] [drm] ib test succeeded in 0 usecs
[ 11.571185] [drm] Radeon Display Connectors
[ 11.571249] [drm] Connector 0:
[ 11.571304] [drm] VGA-1
[ 11.571360] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 11.571418] [drm] Encoders:
[ 11.571717] [drm] CRT1: INTERNAL_DAC1
[ 11.571775] [drm] Connector 1:
[ 11.571831] [drm] DVI-I-1
[ 11.572586] [drm] HPD1
[ 11.572645] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 11.572704] [drm] Encoders:
[ 11.572759] [drm] CRT2: INTERNAL_DAC2
[ 11.572814] [drm] DFP1: INTERNAL_TMDS1
[ 11.572870] [drm] Connector 2:
[ 11.572925] [drm] SVIDEO-1
[ 11.572980] [drm] Encoders:
[ 11.573034] [drm] TV1: INTERNAL_DAC2
[ 11.685397] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 11.708433] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 11.720154] scsi host2: usb-storage 2-5:1.0
[ 11.720958] usbcore: registered new interface driver usb-storage
[ 11.738685] usbcore: registered new interface driver uas
[ 11.828609] [drm] fb mappable at 0xA0040000
[ 11.828672] [drm] vram apper at 0xA0000000
[ 11.828728] [drm] size 8294400
[ 11.828782] [drm] fb depth is 24
[ 11.828837] [drm] pitch is 7680
[ 11.830735] fbcon: radeondrmfb (fb0) is primary device
[ 12.105375] floppy0: no floppy controllers found
[ 12.194486] Console: switching to colour frame buffer device 240x67
[ 12.423419] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 12.432196] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 12.727078] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 12.736305] sd 2:0:0:0: [sdc] 3911680 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 12.737670] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 12.738285] sd 2:0:0:0: [sdc] Write Protect is off
[ 12.738711] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 12.739412] sd 2:0:0:0: [sdc] No Caching mode page found
[ 12.739887] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 12.749104] sdc: sdc1
[ 12.752295] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 14.508535] ata1.00: configured for UDMA/100
[ 14.508926] ata1: EH complete
[ 14.608280] ata2.00: configured for UDMA/33
[ 14.616348] ata2.01: configured for UDMA/33
[ 14.616724] ata2: EH complete
[ 15.607578] Adding 2200868k swap on /dev/sda5. Priority:-1 extents:1 across:2200868k
[ 15.717458] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 16.235292] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,data=ordered
[ 17.324475] lp0: using parport0 (interrupt-driven).
[ 17.487601] Loading iSCSI transport class v2.0-870.
[ 17.555811] iscsi: registered transport (tcp)
[ 17.794957] iscsi: registered transport (iser)
[ 17.908124] fuse init (API version 7.23)
[ 18.122511] tun: Universal TUN/TAP device driver, 1.6
[ 18.152306] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 18.366872] w83627ehf: Found W83627EHG chip at 0x290
[ 18.402159] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150818/utaddress-254)
[ 18.431416] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 41.297212] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 41.355877] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 41.425492] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 41.502574] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 123.214984] EATA0: IRQ 10 mapped to IO-APIC IRQ 17.
[ 123.245259] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[ 123.270616] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y.
[ 123.295817] EATA0: 2.0C, PCI 0xd890, IRQ 17, BMST, SG 122, MB 64.
[ 123.322423] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[ 123.348946] EATA0: SCSI channel 0 enabled, host target ID 7.
[ 123.374231] scsi host3: EATA/DMA 2.0x rev. 8.10.00
[ 124.966018] scsi 3:0:6:0: Direct-Access IBM DCAS-34330W S65A PQ: 0 ANSI: 2
[ 124.991792] scsi 3:0:6:0: cmds/lun 16, sorted, simple tags.
[ 127.091429] sd 3:0:6:0: Attached scsi generic sg4 type 0
[ 127.117209] sd 3:0:6:0: [sdd] 8466688 512-byte logical blocks: (4.33 GB/4.03 GiB)
[ 127.185653] sd 3:0:6:0: [sdd] Write Protect is off
[ 127.213129] sd 3:0:6:0: [sdd] Mode Sense: b3 00 00 08
[ 127.239806] sd 3:0:6:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 127.343388] sdd: sdd1 sdd2 < sdd5 >
[ 127.444672] sd 3:0:6:0: [sdd] Attached SCSI disk
[ 166.531298] Bluetooth: Core ver 2.20
[ 166.560991] NET: Registered protocol family 31
[ 166.587626] Bluetooth: HCI device and connection manager initialized
[ 166.614266] Bluetooth: HCI socket layer initialized
[ 166.641668] Bluetooth: L2CAP socket layer initialized
[ 166.668280] Bluetooth: SCO socket layer initialized
[ 166.731912] Netfilter messages via NETLINK v0.30.
[ 167.193623] Process accounting resumed
[ 170.849838] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 170.877709] Bluetooth: BNEP filters: protocol multicast
[ 170.904870] Bluetooth: BNEP socket layer initialized
[ 177.725472] nfc: nfc_init: NFC Core ver 0.1
[ 177.725717] NET: Registered protocol family 39
[ 235.909205] FAT-fs (sdd5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 250.002203] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!