[PATCH linux-next v9 0/3] mfd: flexcom: add a driver for Flexcom

From: Cyrille Pitchen
Date: Tue Sep 01 2015 - 10:46:43 EST


ChangeLog

v9:
- go back to v5 (use the new "atmel,flexcom-mode" DT property).
- fix the name of the spi node in the DT example: from spi@f8034400 to
spi@400
- align the fields of the struct platform_driver atmel_flexcom_driver as
suggested by Lee Jones.

v8:
- fix the name of the spi node in the DT example: from spi@f8034400 to
spi@2,0
- use the return code of op_property_read_u32_index() instead of -EINVAL
to report error.
- add Acked-by from Nicolas Ferre

v7:
- read the operating mode from the very first u32 of the reg property from
the first available child node (should be unique).
- update the DT bindings documentation accordingly.

v6:
- select the operating mode according to the "compatible" DT property of
the first available child node (should be unique).
- remove the "atmel,flexcom-mode" DT property so the need of a header file
defining macros for the possible values of this deprecated property.

v5:
- create a header file containing macros used by DT bindings
- use numeric constants instead of strings to select the Flexcom mode
- change the license to "GPL v2"
- update the DT binding documentation to make it more readable and add
references to USART, SPI and I2C DT binding documentations. remove the
useless label in the Example section.
- change the register prefix from FX_ to FLEX_ to match the Flexcom
programmer datasheet.
- rename some variables to make them more understandable.

v4:
- check clk_prepare_enable() return code in atmel_flexcom_probe()
- add a commit message to the DT binding patch

v3:
- remove MODULE_ALIAS()
- add Acked-by from Boris Brezillon and Alexandre Belloni

v2:
- enhance the documentation of DT bindings and change the way the "ranges"
property is used.
- replace __raw_readl() and __raw_writel() by readl() and writel().
- change the module license to "GPL" for v2 or later
- print the selected flexcom mode after the hardware version

v1:
This series of patches a support to the Atmel Flexcom, a wrapper which
integrates an USART, a SPI controller and a TWI controller. Only one
peripheral can be used at a time. The active function is selected though
the Flexcom Mode Register.

Cyrille Pitchen (3):
mfd: atmel-flexcom: create include file with macros used by DT
bindings
mfd: devicetree: add bindings for Atmel Flexcom
mfd: atmel-flexcom: add a driver for Atmel Flexible Serial
Communication Unit

.../devicetree/bindings/mfd/atmel-flexcom.txt | 67 +++++++++++++
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-flexcom.c | 104 +++++++++++++++++++++
include/dt-bindings/mfd/atmel-flexcom.h | 16 ++++
5 files changed, 199 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
create mode 100644 drivers/mfd/atmel-flexcom.c
create mode 100644 include/dt-bindings/mfd/atmel-flexcom.h

--
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/