Re: [PATCH 1/2] usb: chipidea: add xilinx zynq platform data

From: sundeep subbaraya
Date: Thu Aug 27 2015 - 01:29:45 EST


Hi,


On Wed, Aug 26, 2015 at 8:57 PM, Nathan Sullivan <nathan.sullivan@xxxxxx> wrote:
> The Xilinx Zynq udc does not need the CI_HDRC_DISABLE_STREAMING flag,
> unlike the default platform data. Add platform data specific to the
> Zynq udc.
>
> Based on a patch by the same name from the Xilinx vendor tree.

I am that Xilinx guy who sent this patch :). It is in Xilinx tree as
temporary fix and
I did not debug further why UDC works only when streaming is enabled.
Probably this is right time to post my question here.
I was expecting like:
Streaming disabled - both low bandwidth and high bandwidth systems
should work fine
Streaming enabled - only for high bandwidth systems
but this is not the case, Zynq UDC works only when Streaming is enabled.
Please correct me if I am wrong.

Thanks,
Sundeep

>
> Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx>
> ---
> drivers/usb/chipidea/ci_hdrc_usb2.c | 25 +++++++++++++++++++------
> 1 file changed, 19 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> index 9eae1a1..4456d2c 100644
> --- a/drivers/usb/chipidea/ci_hdrc_usb2.c
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -12,6 +12,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/usb/chipidea.h>
> @@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
> .flags = CI_HDRC_DISABLE_STREAMING,
> };
>
> +static struct ci_hdrc_platform_data ci_zynq_pdata = {
> + .capoffset = DEF_CAPOFFSET,
> +};
> +
> +static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> + { .compatible = "chipidea,usb2"},
> + { .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> +
> static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct ci_hdrc_usb2_priv *priv;
> struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
> int ret;
> + const struct of_device_id *match;
>
> if (!ci_pdata) {
> ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
> *ci_pdata = ci_default_pdata; /* struct copy */
> }
>
> + match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
> + if (match && match->data) {
> + /* struct copy */
> + *ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
> + }
> +
> priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
> @@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> - { .compatible = "chipidea,usb2" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> -
> static struct platform_driver ci_hdrc_usb2_driver = {
> .probe = ci_hdrc_usb2_probe,
> .remove = ci_hdrc_usb2_remove,
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/