Re: [PATCH RFC 2/2] staging: fbtft: fix 9-bit SPI support detection

From: Noralf TrÃnnes
Date: Mon Aug 24 2015 - 18:00:49 EST



Den 24.08.2015 20:33, skrev Stefan Wahren:
Since bits_per_word isn't usually checked during SPI setup the 9-bit
support must be checked manually.

Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
drivers/staging/fbtft/fbtft-core.c | 7 +++++++
drivers/staging/fbtft/flexfb.c | 7 +++++++
2 files changed, 14 insertions(+)

diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 3638554..bd71487 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -1438,6 +1438,13 @@ int fbtft_probe_common(struct fbtft_display *display,
if (par->spi && display->buswidth == 9) {
par->spi->bits_per_word = 9;
ret = spi_setup(par->spi);
+ if (!ret) {
+ struct spi_master *ma = par->spi->master;
+
+ if (!(ma->bits_per_word_mask & SPI_BPW_MASK(9)))
+ ret = -EINVAL;
+ }
+
if (ret) {

There's no point in calling spi_setup() when it doesn't check bits_per_word.
Apparently this changed with the commit:
spi: convert drivers to use bits_per_word_mask.
This has not been detected earlier, because FBTFT was previously mostly
used on the Raspberry Pi which had a downstream SPI driver that did this check.

How about this:

- par->spi->bits_per_word = 9;
- ret = par->spi->master->setup(par->spi);
+ if (par->spi->master->bits_per_word_mask & SPI_BPW_MASK(9)) {
+ par->spi->bits_per_word = 9;
- if (ret) {
+ } else {
dev_warn(&par->spi->dev,
"9-bit SPI not available, emulating using 8-bit.\n");
- par->spi->bits_per_word = 8;
- ret = par->spi->master->setup(par->spi);
- if (ret)
- goto out_release;
/* allocate buffer with room for dc bits */
par->extra = devm_kzalloc(par->info->device,

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/