[PATCH 1/2] isdn/gigaset: reset tty->receive_room when attaching ser_gigaset

From: Tilman Schmidt
Date: Mon Jul 13 2015 - 19:31:48 EST


Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:

Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.

The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.

Fixes: 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: Tilman Schmidt <tilman@xxxxxxx>
---
drivers/isdn/gigaset/ser-gigaset.c | 11 ++++++++++-
1 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 8c91fd5..3ac9c41 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -524,9 +524,18 @@ gigaset_tty_open(struct tty_struct *tty)
cs->hw.ser->tty = tty;
atomic_set(&cs->hw.ser->refcnt, 1);
init_completion(&cs->hw.ser->dead_cmp);
-
tty->disc_data = cs;

+ /* Set the amount of data we're willing to receive per call
+ * from the hardware driver to half of the input buffer size
+ * to leave some reserve.
+ * Note: We don't do flow control towards the hardware driver.
+ * If more data is received than will fit into the input buffer,
+ * it will be dropped and an error will be logged. This should
+ * never happen as the device is slow and the buffer size ample.
+ */
+ tty->receive_room = RBUFSIZE/2;
+
/* OK.. Initialization of the datastructures and the HW is done.. Now
* startup system and notify the LL that we are ready to run
*/
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/