Re: [RFC PATCH] i2c: busses: i2c-omap: Increase timeout for i2c interrupt

From: Vignesh R
Date: Fri Jul 10 2015 - 09:17:31 EST




On 07/10/2015 02:39 PM, Wolfram Sang wrote:
>
>> 60 s sounds way too much and actually I simply don't believe this is
>> the root cause. If I take a look into the driver, then I see, that
>
> I agree, this is just a workaround.
>

Yes, this is a workaround. I thought this is simpler change and can go
into -rc while I work on the better fix. As you can see, the other
suggestions need quite a significant change to the isr code.

>> the design is not really the best. The whole IRQ handling could be
>> actually performed in hard IRQ handler, without threading overhead.
>> Putting even 2 bytes in the controller FIFO should not be too heavy
>> for the hard IRQ handler. Then these ridiculous spin_lock()s. What
>> is the reason behind? The IRQ is flagged with ONESHOT, so thread and
>> hardirq handler are anyway mutually excluded. But if this thread
>> ever runs longer than it's allowed in IRQ context, then it anyway
>> produces this IRQ latency because it locks spin_lock_irqsave() for
>> the whole time! So the whole point of threaded interrupt is missing.
>
> Furthermore, this combination of threaded_irq and struct completion seems
> bogus to me. If you just want to ensure the irq happened before timeout,
> you just complete when the irq happened and do the "bottom half" after the
> completion returned?

This sounds good to me. I will try to implement this option.
Thanks for the suggestion.

>
>> I would propose you to throw away spinlocks. Convert threaded IRQ to
>> just one hardirq handler. And continue debugging. You will reduce the
>> load of the system with the above measures, maybe it will not happen
>> any more, maybe you'll figure out that problem is somewhere else.
>
> Or this.

I am not convinced with moving entire code at hardirq context. I believe
its better to keep hardirq as small as possible.

--
Regards
Vignesh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/