[PATCH 3/3] nfit: add support for NVDIMM "latch" flag

From: Ross Zwisler
Date: Wed Jul 08 2015 - 12:01:13 EST


Add support in the NFIT BLK I/O path for the "latch" flag
defined in the "Get Block NVDIMM Flags" _DSM function:

http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf

This flag requires the driver to read back the command register after it
is written in the block I/O path. This ensures that the hardware has
fully processed the new command and moved the aperture appropriately.

Signed-off-by: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx>
Cc: linux-nvdimm@xxxxxxxxxxxx
Cc: linux-acpi@xxxxxxxxxxxxxxx
Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Cc: Len Brown <lenb@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Jeff Moyer <jmoyer@xxxxxxxxxx>
Cc: Toshi Kani <toshi.kani@xxxxxx>
---
drivers/acpi/nfit.c | 33 ++++++++++++++++++++++++++++++++-
drivers/acpi/nfit.h | 6 ++++++
2 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
index b3c446412f61..9062c11c1062 100644
--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -1059,7 +1059,9 @@ static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,

writeq(cmd, mmio->base + offset);
wmb_blk(nfit_blk);
- /* FIXME: conditionally perform read-back if mandated by firmware */
+
+ if (nfit_blk->dimm_flags & ND_BLK_DCR_LATCH)
+ readq(mmio->base + offset);
}

static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk,
@@ -1258,6 +1260,28 @@ static int nfit_blk_init_interleave(struct nfit_blk_mmio *mmio,
return 0;
}

+static int acpi_nfit_blk_get_flags(struct nvdimm_bus_descriptor *nd_desc,
+ struct nvdimm *nvdimm, struct nfit_blk *nfit_blk)
+{
+ struct nd_cmd_dimm_flags flags;
+ int rc;
+
+ memset(&flags, 0, sizeof(flags));
+ rc = nd_desc->ndctl(nd_desc, nvdimm, ND_CMD_DIMM_FLAGS, &flags,
+ sizeof(flags));
+
+ if (rc >= 0) {
+ if (!flags.status)
+ nfit_blk->dimm_flags = flags.flags;
+ else if (flags.status == ND_DSM_STATUS_NOT_SUPPORTED)
+ nfit_blk->dimm_flags = 0; /* as per the _DSM spec */
+ else
+ rc = -EINVAL;
+ }
+
+ return rc;
+}
+
static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
struct device *dev)
{
@@ -1333,6 +1357,13 @@ static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
return rc;
}

+ rc = acpi_nfit_blk_get_flags(nd_desc, nvdimm, nfit_blk);
+ if (rc < 0) {
+ dev_dbg(dev, "%s: %s failed get DIMM flags\n",
+ __func__, nvdimm_name(nvdimm));
+ return rc;
+ }
+
nfit_flush = nfit_mem->nfit_flush;
if (nfit_flush && nfit_flush->flush->hint_count != 0) {
struct acpi_nfit_flush_address *flush = nfit_flush->flush;
diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h
index d284729cc37c..98e36ca0dfc2 100644
--- a/drivers/acpi/nfit.h
+++ b/drivers/acpi/nfit.h
@@ -40,6 +40,11 @@ enum nfit_uuids {
NFIT_UUID_MAX,
};

+enum {
+ ND_BLK_DCR_LATCH = 2,
+ ND_DSM_STATUS_NOT_SUPPORTED = 1,
+};
+
struct nfit_spa {
struct acpi_nfit_system_address *spa;
struct list_head list;
@@ -131,6 +136,7 @@ struct nfit_blk {
u64 stat_offset;
u64 cmd_offset;
void __iomem *nvdimm_flush;
+ u32 dimm_flags;
};

struct nfit_spa_mapping {
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/