Re: [PATCH RFC v2 3/3] misc: Add w2g0004 gps receiver driver

From: Dr. H. Nikolaus Schaller
Date: Tue Jun 30 2015 - 04:35:56 EST


Hi,
thanks for the valid and very valuable comments!
We will integrate them into RFC v3.
BR,
Nikolaus

Am 30.06.2015 um 10:23 schrieb Sergei Zviagintsev <sergei@xxxxxxxx>:

> Hi,
>
> I left some comments below.
>
> On Sun, Jun 28, 2015 at 09:46:26PM +0200, Marek Belisko wrote:
>> From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
>>
>> Add driver for Wi2Wi w2g004 GPS module connected through uart. Use uart
>> slave + notification hooks to glue with tty.
>>
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/misc/wi2wi,w2sg0004.txt | 18 +
>> drivers/misc/Kconfig | 18 +
>> drivers/misc/Makefile | 1 +
>> drivers/misc/w2sg0004.c | 436 +++++++++++++++++++++
>> include/linux/w2sg0004.h | 28 ++
>> 5 files changed, 501 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
>> create mode 100644 drivers/misc/w2sg0004.c
>> create mode 100644 include/linux/w2sg0004.h
>>
>> diff --git a/Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt b/Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
>> new file mode 100644
>> index 0000000..ef0d6d5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/wi2wi,w2sg0004.txt
>> @@ -0,0 +1,18 @@
>> +Wi2Wi GPS module connected through UART
>> +
>> +Required properties:
>> +- compatible: wi2wi,w2sg0004 or wi2wi,w2sg0084
>> +- on-off-gpio: the GPIO that controls the module's on-off toggle input
>> +- uart: the uart we are connected to (provides DTR for power control)
>> +
>> +Optional properties:
>> +- lna-suppy: an (optional) LNA regulator that is enabled together with the GPS receiver
>> +
>> +example:
>> +
>> + gps_receiver: w2sg0004 {
>> + compatible = "wi2wi,w2sg0004";
>> + lna-supply = <&vsim>; /* LNA regulator */
>> + on-off-gpio = <&gpio5 17 0>; /* GPIO_145: trigger for turning on/off w2sg0004 */
>> + uart = <&uart1>; /* we are a slave of uart1 */
>> + }
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 42c3852..952add4 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -527,4 +527,22 @@ source "drivers/misc/mic/Kconfig"
>> source "drivers/misc/genwqe/Kconfig"
>> source "drivers/misc/echo/Kconfig"
>> source "drivers/misc/cxl/Kconfig"
>> +
>> +menu "GTA04 misc hardware support"
>> +
>> +config W2SG0004
>> + tristate "W2SG0004 on/off control"
>> + depends on GPIOLIB
>> + help
>> + Enable on/off control of W2SG0004 GPS using a tty slave to
>> + to allow powering up if the /dev/tty$n is opened.
>> + It also provides a rfkill gps node to control the LNA power.
>> +
>> +config W2SG0004_DEBUG
>> + bool "W2SG0004 on/off debugging"
>> + depends on W2SG0004
>> + help
>> + Enable driver debugging mode of W2SG0004 GPS.
>> +
>> +endmenu
>> endmenu
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index d056fb7..3bc67c7 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -53,5 +53,6 @@ obj-$(CONFIG_SRAM) += sram.o
>> obj-y += mic/
>> obj-$(CONFIG_GENWQE) += genwqe/
>> obj-$(CONFIG_ECHO) += echo/
>> +obj-$(CONFIG_W2SG0004) += w2sg0004.o
>> obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
>> obj-$(CONFIG_CXL_BASE) += cxl/
>> diff --git a/drivers/misc/w2sg0004.c b/drivers/misc/w2sg0004.c
>> new file mode 100644
>> index 0000000..c5f0f7b
>> --- /dev/null
>> +++ b/drivers/misc/w2sg0004.c
>> @@ -0,0 +1,436 @@
>> +/*
>> + * w2sg0004.c
>> + * Driver for power controlling the w2sg0004/w2sg0084 GPS receiver.
>> + *
>> + * This receiver has an ON/OFF pin which must be toggled to
>> + * turn the device 'on' of 'off'. A high->low->high toggle
>> + * will switch the device on if it is off, and off if it is on.
>> + *
>> + * To enable receiving on/off requests we register with the
>> + * UART power management notifications.
>> + *
>> + * It is not possible to directly detect the state of the device.
>> + * However when it is on it will send characters on a UART line
>> + * regularly.
>> + *
>> + * To detect that the power state is out of sync (e.g. if GPS
>> + * was enabled before a reboot), we register for UART data received
>> + * notifications.
>> + *
>> + * In addition we register as a rfkill client so that we can
>> + * control the LNA power.
>> + *
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/sched.h>
>> +#include <linux/irq.h>
>> +#include <linux/slab.h>
>> +#include <linux/err.h>
>> +#include <linux/delay.h>
>> +#include <linux/of.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/w2sg0004.h>
>> +#include <linux/workqueue.h>
>> +#include <linux/rfkill.h>
>> +#include <linux/serial_core.h>
>> +
>> +#ifdef CONFIG_W2SG0004_DEBUG
>> +#undef pr_debug
>> +#define pr_debug printk
>> +#endif
>> +
>> +/*
>> + * There seems to be restrictions on how quickly we can toggle the
>> + * on/off line. data sheets says "two rtc ticks", whatever that means.
>> + * If we do it too soon it doesn't work.
>> + * So we have a state machine which uses the common work queue to ensure
>> + * clean transitions.
>> + * When a change is requested we record that request and only act on it
>> + * once the previous change has completed.
>> + * A change involves a 10ms low pulse, and a 990ms raised level, so only
>> + * one change per second.
>> + */
>> +
>> +enum w2sg_state {
>> + W2SG_IDLE, /* is not changing state */
>> + W2SG_PULSE, /* activate on/off impulse */
>> + W2SG_NOPULSE /* deactivate on/off impulse */
>> +};
>> +
>> +struct w2sg_data {
>> + struct rfkill *rf_kill;
>> + struct regulator *lna_regulator;
>> + int lna_blocked; /* rfkill block gps active */
>> + int lna_is_off; /* LNA is currently off */
>> + int is_on; /* current state (0/1) */
>
> Wouldn't bool types be better for these three and also for `requested'
> and `suspended'?
>
>> + unsigned long last_toggle;
>> + unsigned long backoff; /* time to wait since last_toggle */
>> + int on_off_gpio; /* the on-off gpio number */
>> + struct uart_port *uart; /* the drvdata of the uart or tty */
>> + enum w2sg_state state;
>> + int requested; /* requested state (0/1) */
>> + int suspended;
>> + spinlock_t lock;
>> + struct delayed_work work;
>> +};
>> +
>> +static int w2sg_data_set_lna_power(struct w2sg_data *data)
>> +{
>> + int ret = 0;
>> + int off = data->suspended || !data->requested || data->lna_blocked;
>> +
>> + pr_debug("%s: %s\n", __func__, off ? "off" : "on");
>> +
>> + if (off != data->lna_is_off) {
>> + data->lna_is_off = off;
>> + if (!IS_ERR_OR_NULL(data->lna_regulator)) {
>> + if (off)
>> + regulator_disable(data->lna_regulator);
>> + else
>> + ret = regulator_enable(data->lna_regulator);
>> + }
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static void w2sg_data_set_power(void *pdata, int val)
>
> int val -> bool val?
>
>> +{
>> + struct w2sg_data *data = (struct w2sg_data *) pdata;
>> + unsigned long flags;
>> +
>> + pr_debug("%s to %d (%d)\n", __func__, val, data->requested);
>> +
>> + spin_lock_irqsave(&data->lock, flags);
>> +
>> + if (val && !data->requested) {
>> + data->requested = true;
>> + } else if (!val && data->requested) {
>> + data->backoff = HZ;
>> + data->requested = false;
>> + } else
>
> Braces issue with `else' branch.
>
>> + goto unlock;
>> +
>> + pr_debug("w2sg scheduled for %d\n", data->requested);
>> +
>> + if (!data->suspended)
>> + schedule_delayed_work(&data->work, 0);
>> +unlock:
>> + spin_unlock_irqrestore(&data->lock, flags);
>> +}
>> +
>> +/* called each time data is received by the host (i.e. sent by the w2sg0004) */
>> +
>> +static int rx_notification(void *pdata, unsigned int *c)
>> +{
>> + struct w2sg_data *data = (struct w2sg_data *) pdata;
>> + unsigned long flags;
>> +
>> + if (!data->requested && !data->is_on) {
>
> Isn't it better to invert the if-statement and place return to be less
> indented and more readable?

Well, it is intended to describe the “problematic” case, i.e. nothing requested and not on.

But a proper comment might help with reversed logic. Something like /* rx was expected */

>
>> + pr_debug("%02x!", *c); /* we have received a RX signal while GPS should be off */
>> + if ((data->state == W2SG_IDLE) &&
>> + time_after(jiffies,
>> + data->last_toggle + data->backoff)) {
>
> Whole time_after() call should be on the same line.
>
>> + /* Should be off by now, time to toggle again */
>> + pr_debug("w2sg has sent data although it should be off!\n");
>> + data->is_on = true;
>> + data->backoff *= 2;
>> + spin_lock_irqsave(&data->lock, flags);
>> + if (!data->suspended)
>> + schedule_delayed_work(&data->work, 0);
>> + spin_unlock_irqrestore(&data->lock, flags);
>> + }
>> + }
>> + return 0; /* forward to tty */
>> +}
>> +
>> +/* called by uart modem control line changes (DTR) */
>> +
>> +static int w2sg_mctrl(void *pdata, int val)
>> +{
>> + pr_debug("%s(...,%x)\n", __func__, val);
>> + val = (val & TIOCM_DTR) != 0; /* DTR controls power on/off */
>
> IMO the following would be more readable:
>
> bool power_on = !!(val & TIOCM_DTR);
>
>> + w2sg_data_set_power((struct w2sg_data *) pdata, val);
>> + return 0;
>> +}
>> +
>> +/* try to toggle the power state by sending a pulse to the on-off GPIO */
>> +
>> +static void toggle_work(struct work_struct *work)
>> +{
>> + struct w2sg_data *data = container_of(work, struct w2sg_data, work.work);
>> +
>> + switch (data->state) {
>> + case W2SG_IDLE:
>> + spin_lock_irq(&data->lock);
>> + if (data->requested == data->is_on) {
>> + spin_unlock_irq(&data->lock);
>> + return;
>> + }
>> + spin_unlock_irq(&data->lock);
>> + w2sg_data_set_lna_power(data); /* update LNA power state */
>> + gpio_set_value_cansleep(data->on_off_gpio, 0);
>> + data->state = W2SG_PULSE;
>> +
>> + pr_debug("w2sg: power gpio ON\n");
>> +
>> + schedule_delayed_work(&data->work,
>> + msecs_to_jiffies(10));
>> + break;
>> +
>> + case W2SG_PULSE:
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + data->last_toggle = jiffies;
>> + data->state = W2SG_NOPULSE;
>> + data->is_on = !data->is_on;
>> +
>> + pr_debug("w2sg: power gpio OFF\n");
>> +
>> + schedule_delayed_work(&data->work,
>> + msecs_to_jiffies(10));
>> + break;
>> +
>> + case W2SG_NOPULSE:
>> + data->state = W2SG_IDLE;
>> + pr_debug("w2sg: idle\n");
>> +
>> + break;
>> +
>
> default case?
>
>> + }
>> +}
>> +
>> +static int w2sg_data_rfkill_set_block(void *pdata, bool blocked)
>> +{
>> + struct w2sg_data *data = pdata;
>> +
>> + pr_debug("%s: blocked: %d\n", __func__, blocked);
>> +
>> + data->lna_blocked = blocked;
>> +
>> + return w2sg_data_set_lna_power(data);
>> +}
>> +
>> +static struct rfkill_ops w2sg_data0004_rfkill_ops = {
>> + .set_block = w2sg_data_rfkill_set_block,
>> +};
>> +
>> +static int w2sg_data_probe(struct platform_device *pdev)
>> +{
>> + struct w2sg_pdata *pdata = dev_get_platdata(&pdev->dev);
>> + struct w2sg_data *data;
>> + struct rfkill *rf_kill;
>> + int err;
>> +
>> + pr_debug("%s()\n", __func__);
>> +
>> + if (pdev->dev.of_node) {
>> + struct device *dev = &pdev->dev;
>> + enum of_gpio_flags flags;
>> +
>> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> + if (!pdata)
>> + return -ENOMEM;
>> +
>> + pdata->on_off_gpio = of_get_named_gpio_flags(dev->of_node, "on-off-gpio", 0, &flags);
>> +
>> + if (pdata->on_off_gpio == -EPROBE_DEFER)
>> + return -EPROBE_DEFER; /* defer until we have all gpios */
>> +
>> + pdata->lna_regulator = devm_regulator_get_optional(dev, "lna");
>> +
>> + pr_debug("%x() lna_regulator = %p\n", __func__, pdata->lna_regulator);
>> +
>> + pdev->dev.platform_data = pdata;
>> + }
>> +
>> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>> + if (data == NULL)
>> + return -ENOMEM;
>> +
>> + data->lna_regulator = pdata->lna_regulator;
>> + data->lna_blocked = true;
>> + data->lna_is_off = true;
>> +
>> + data->on_off_gpio = pdata->on_off_gpio;
>> +
>> + data->is_on = false;
>> + data->requested = false;
>> + data->state = W2SG_IDLE;
>> + data->last_toggle = jiffies;
>> + data->backoff = HZ;
>> +
>> +#ifdef CONFIG_OF
>> + data->uart = devm_serial_get_uart_by_phandle(&pdev->dev, "uart", 0);
>> + if (IS_ERR(data->uart)) {
>> + if (PTR_ERR(data->uart) == -EPROBE_DEFER)
>> + return -EPROBE_DEFER; /* we can't probe yet */
>> + else
>
> `else' is redundand
>
>> + data->uart = NULL; /* no UART */
>> + }
>> +#endif
>> +
>> + INIT_DELAYED_WORK(&data->work, toggle_work);
>> + spin_lock_init(&data->lock);
>> +
>> + err = devm_gpio_request(&pdev->dev, data->on_off_gpio, "w2sg0004-on-off");
>> + if (err < 0)
>> + goto out;
>> +
>> + gpio_direction_output(data->on_off_gpio, false);
>> +
>> + if (data->uart) {
>> + struct ktermios termios = {
>> + .c_iflag = IGNBRK,
>> + .c_oflag = 0,
>> + .c_cflag = B9600 | CS8,
>> + .c_lflag = 0,
>> + .c_line = 0,
>> + .c_ispeed = 9600,
>> + .c_ospeed = 9600
>> + };
>> + uart_register_slave(data->uart, data);
>> + uart_register_mctrl_notification(data->uart, w2sg_mctrl);
>> + uart_register_rx_notification(data->uart, rx_notification, &termios);
>> + }
>> +
>> + rf_kill = rfkill_alloc("GPS", &pdev->dev, RFKILL_TYPE_GPS,
>> + &w2sg_data0004_rfkill_ops, data);
>> + if (rf_kill == NULL) {
>> + err = -ENOMEM;
>> + goto err_rfkill;
>
> return -ENOMEM;
>
>> + }
>> +
>> + err = rfkill_register(rf_kill);
>> + if (err) {
>> + dev_err(&pdev->dev, "Cannot register rfkill device\n");
>> + goto err_rfkill;
>> + }
>> +
>> + data->rf_kill = rf_kill;
>> +
>> + platform_set_drvdata(pdev, data);
>> +
>> + pr_debug("w2sg0004 probed\n");
>> +
>> +#ifdef CONFIG_W2SG0004_DEBUG
>> + /* turn on for debugging rx notifications */
>> + pr_debug("w2sg power gpio ON\n");
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + mdelay(100);
>> + pr_debug("w2sg power gpio OFF\n");
>> + gpio_set_value_cansleep(data->on_off_gpio, 0);
>> + mdelay(300);
>> +#endif
>> +
>> + /* if we won't receive mctrl notifications, turn on.
>> + * otherwise keep off until DTR is asserted through mctrl.
>> + */
>> +
>> + w2sg_data_set_power(data, !data->uart);
>> +
>> + return 0;
>> +
>> +err_rfkill:
>> + rfkill_destroy(rf_kill);
>> +out:
>
> `out' label is useless as no cleanup code here.
>
> Keeping in mind that the one of two `goto err_rfkill' is incorrect,
> `err_rfkill' label can be removed as there is the only one code path
> left which is using it.
>
>> + return err;
>> +}
>> +
>> +static int w2sg_data_remove(struct platform_device *pdev)
>> +{
>> + struct w2sg_data *data = platform_get_drvdata(pdev);
>> +
>> + cancel_delayed_work_sync(&data->work);
>> +
>> + if (data->uart) {
>> + uart_register_rx_notification(data->uart, NULL, NULL);
>> + uart_register_slave(data->uart, NULL);
>> + }
>> + return 0;
>> +}
>> +
>> +static int w2sg_data_suspend(struct device *dev)
>> +{
>> + struct w2sg_data *data = dev_get_drvdata(dev);
>> +
>> + spin_lock_irq(&data->lock);
>> + data->suspended = true;
>> + spin_unlock_irq(&data->lock);
>> +
>> + cancel_delayed_work_sync(&data->work);
>> +
>> + w2sg_data_set_lna_power(data); /* shuts down if needed */
>> +
>> + if (data->state == W2SG_PULSE) {
>> + msleep(10);
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + data->last_toggle = jiffies;
>> + data->is_on = !data->is_on;
>> + data->state = W2SG_NOPULSE;
>> + }
>> +
>> + if (data->state == W2SG_NOPULSE) {
>> + msleep(10);
>> + data->state = W2SG_IDLE;
>> + }
>> +
>> + if (data->is_on) {
>> + pr_info("GPS off for suspend %d %d %d\n", data->requested, data->is_on, data->lna_is_off);
>> +
>> + gpio_set_value_cansleep(data->on_off_gpio, 0);
>> + msleep(10);
>> + gpio_set_value_cansleep(data->on_off_gpio, 1);
>> + data->is_on = 0;
>
> 0 -> false (to stay similar with other code)
>
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int w2sg_data_resume(struct device *dev)
>> +{
>> + struct w2sg_data *data = dev_get_drvdata(dev);
>> +
>> + spin_lock_irq(&data->lock);
>> + data->suspended = false;
>> + spin_unlock_irq(&data->lock);
>> +
>> + pr_info("GPS resuming %d %d %d\n", data->requested, data->is_on, data->lna_is_off);
>> +
>> + schedule_delayed_work(&data->work, 0); /* enables LNA if needed */
>> +
>> + return 0;
>> +}
>> +
>> +#if defined(CONFIG_OF)
>> +static const struct of_device_id w2sg0004_of_match[] = {
>> + { .compatible = "wi2wi,w2sg0004" },
>> + { .compatible = "wi2wi,w2sg0084" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, w2sg0004_of_match);
>> +#endif
>> +
>> +SIMPLE_DEV_PM_OPS(w2sg_pm_ops, w2sg_data_suspend, w2sg_data_resume);
>> +
>> +static struct platform_driver w2sg_data_driver = {
>> + .probe = w2sg_data_probe,
>> + .remove = w2sg_data_remove,
>> + .driver = {
>> + .name = "w2sg0004",
>> + .owner = THIS_MODULE,
>> + .pm = &w2sg_pm_ops,
>> + .of_match_table = of_match_ptr(w2sg0004_of_match)
>> + },
>> +};
>> +
>> +module_platform_driver(w2sg_data_driver);
>> +
>> +MODULE_ALIAS("w2sg0004");
>> +
>> +MODULE_AUTHOR("NeilBrown <neilb@xxxxxxx>");
>> +MODULE_DESCRIPTION("w2sg0004 GPS power management driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/w2sg0004.h b/include/linux/w2sg0004.h
>> new file mode 100644
>> index 0000000..7aee709
>> --- /dev/null
>> +++ b/include/linux/w2sg0004.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * UART slave to allow ON/OFF control of w2sg0004 GPS receiver.
>> + *
>> + * Copyright (C) 2011 Neil Brown <neil@xxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + */
>> +
>> +
>> +
>> +#ifndef __LINUX_W2SG0004_H
>> +#define __LINUX_W2SG0004_H
>> +
>> +#include <linux/regulator/consumer.h>
>> +
>> +struct w2sg_pdata {
>> + struct regulator *lna_regulator; /* enable LNA power */
>> + int on_off_gpio; /* connected to the on-off input of the GPS module */
>> +};
>> +#endif /* __LINUX_W2SG0004_H */
>> --
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/