Re: [PATCH 09/17] ARM: dts: dra7: Use "syscon-phy-power" instead of "ctrl-module" in SATA PHY node

From: Roger Quadros
Date: Wed Jun 24 2015 - 08:07:02 EST


On Tue, 23 Jun 2015 17:28:54 +0530
Kishon Vijay Abraham I <kishon@xxxxxx> wrote:

> Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
> property from SATA PHY node. Since "omap_control_sata" note is no longer
> used, remove it.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>

Acked-by: Roger Quadros <rogerq@xxxxxx>

cheers,
-roger

> ---
> arch/arm/boot/dts/dra7.dtsi | 10 +---------
> 1 file changed, 1 insertion(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 3f434f7..92e0741 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -1115,14 +1115,6 @@
> status = "disabled";
> };
>
> - omap_control_sata: control-phy@4a002374 {
> - compatible = "ti,control-phy-pipe3";
> - reg = <0x4a002374 0x4>;
> - reg-names = "power";
> - clocks = <&sys_clkin1>;
> - clock-names = "sysclk";
> - };
> -
> /* OCP2SCP3 */
> ocp2scp@4a090000 {
> compatible = "ti,omap-ocp2scp";
> @@ -1137,7 +1129,7 @@
> <0x4A096400 0x64>, /* phy_tx */
> <0x4A096800 0x40>; /* pll_ctrl */
> reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> - ctrl-module = <&omap_control_sata>;
> + syscon-phy-power = <&dra7_ctrl_core 0x374>;
> clocks = <&sys_clkin1>, <&sata_ref_clk>;
> clock-names = "sysclk", "refclk";
> syscon-pllreset = <&dra7_ctrl_core 0x3fc>;
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/