Re: [PATCH v3 2/3] clk: stm32: Add clock driver for STM32F4[23]xxx devices

From: Stephen Boyd
Date: Mon Jun 22 2015 - 18:49:55 EST


On 06/10, Daniel Thompson wrote:
> The driver supports decoding and statically modelling PLL state (i.e.
> we inherit state from bootloader) and provides support for all
> peripherals that support simple one-bit gated clocks. The covers all
> peripherals whose clocks come from the AHB, APB1 or APB2 buses.
>
> It has been tested on an STM32F429I-Discovery board. The clock counts
> for TIM2, USART1 and SYSTICK are all set correctly and the wall clock
> looks OK when checked with a stopwatch. I have also tested a prototype
> driver for the RNG hardware. The RNG clock is correctly enabled by the
> framework (also did inverse test and proved that by changing DT to
> configure the wrong clock bit then we observe the RNG driver to fail).
>
> Signed-off-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> Reviewed-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> ---

Applied to clk-next

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/