Re: [PATCH] drm/i915: enable BIOS hang workaround for Lenovo T60 too

[mikko . rapeli]

On Fri Jun 19 17:44:31 2015 GMT+0200, Daniel Vetter wrote:
> On Fri, Jun 19, 2015 at 08:17:55AM +0200, Mikko Rapeli wrote:
> > When trying to hibernate a Lenovo T60 the half moon led keeps blinking and
> > devices does not power off since commit da2bc1b9db3.
> > 
> > T60 chip details:
> > 
> > 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GM
> > L Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
> >         Subsystem: Lenovo ThinkPad R60/T60/X60 series
> >         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
> > ping- SERR- FastB2B- DisINTx-
> >         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> > <MAbort- >SERR- <PERR- INTx-
> >         Latency: 0
> >         Interrupt: pin A routed to IRQ 16
> >         Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K]
> >         Region 1: I/O ports at 1800 [size=8]
> >         Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> >         Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K]
> >         Expansion ROM at <unassigned> [disabled]
> >         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
> >                 Address: 00000000  Data: 0000
> >         Capabilities: [d0] Power Management version 2
> >                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> >                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >         Kernel driver in use: i915
> > 
> > Signed-off-by: Mikko Rapeli <mikko.rapeli@xxxxxx>
> > ---
> >  drivers/gpu/drm/i915/i915_drv.c | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> > index ec4d932..36e311e 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.c
> > +++ b/drivers/gpu/drm/i915/i915_drv.c
> > @@ -641,11 +641,12 @@ static int i915_drm_suspend_late(struct drm_device *drm_dev, bool hibernation)
> >  	 * the device even though it's already in D3 and hang the machine. So
> >  	 * leave the device in D0 on those platforms and hope the BIOS will
> >  	 * power down the device properly. Platforms where this was seen:
> > -	 * Lenovo Thinkpad X301, X61s
> > +	 * Lenovo Thinkpad X301, X61s, T60
> >  	 */
> >  	if (!(hibernation &&
> >  	      drm_dev->pdev->subsystem_vendor == PCI_VENDOR_ID_LENOVO &&
> > -	      INTEL_INFO(dev_priv)->gen == 4))
> > +	      ((INTEL_INFO(dev_priv)->gen == 3) ||
> > +	       (INTEL_INFO(dev_priv)->gen == 4)))
> 
> I wonder whether we shouldn't do this unconditionally for gen4 and earlier
> for Lenovo ... Anyway this needs Cc: stable@xxxxxxxxxxxxxxx and is for
> Jani to pick up.


Yes, I also tought about enabling this for all older Lenovo devices but I don't know the hardware or chips and can't test so I let it be. Also reverting the original bug causing patch could be an option since this is affecting so many devices and users.
 
> Thanks for figuring out what's been broken here.

You're welcome.

-Mikko

> -Daniel
> 
> >  		pci_set_power_state(drm_dev->pdev, PCI_D3hot);
> >  
> >  	return 0;
> > -- 
> > 2.1.4
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > http://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
>

-- 
Sent from my Jolla