[PATCH-v2 2/3] mfd: 88pm800: Allow configuration of interrupt clear method

From: Vaibhav Hiremath
Date: Wed Jun 17 2015 - 15:02:08 EST


As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
(page 0) controls the method of clearing interrupt
status of 88pm800 family of devices;

0: clear on read
1: clear on write

This patch allows to configure this field, through DT.

Also, as suggested by "Lee Jones" renaming DT property and variable
field to appropriate name.

Signed-off-by: Zhao Ye <zhaoy@xxxxxxxxxxx>
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
---
drivers/mfd/88pm800.c | 15 ++++++++++-----
include/linux/mfd/88pm80x.h | 6 ++++--
2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 059f01a..c1a6306 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_ONESHOT;
- int data, mask, ret = -EINVAL;
+ int irq_clr_mode, mask, ret = -EINVAL;

if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
@@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
}

/*
- * irq_mode defines the way of clearing interrupt. it's read-clear by
- * default.
+ * irq_clr_on_wr defines the way of clearing interrupt by
+ * read/write(0/1). It's read-clear by default.
*/
mask =
PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
PM800_WAKEUP2_INT_MASK;

- data = PM800_WAKEUP2_INT_CLEAR;
- ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
+ irq_clr_mode = (chip->irq_clr_on_wr) ?
+ PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
+ ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);

if (ret < 0)
goto out;
@@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip,
}

chip->regmap_irq_chip = &pm800_irq_chip;
+ chip->irq_clr_on_wr = pdata->irq_clr_on_wr;

ret = device_irq_init_800(chip);
if (ret < 0) {
@@ -568,6 +570,9 @@ static int pm800_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to allocaate memory\n");
return -ENOMEM;
}
+
+ pdata->irq_clr_on_wr = of_property_read_bool(np,
+ "marvell,irq-clr-on-write");
}

ret = pm80x_init(client);
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 97cb283..94b3dcd 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -77,6 +77,8 @@ enum {
#define PM800_WAKEUP2 (0x0E)
#define PM800_WAKEUP2_INV_INT (1 << 0)
#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
+#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1)
+#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1)
#define PM800_WAKEUP2_INT_MASK (1 << 2)

#define PM800_POWER_UP_LOG (0x10)
@@ -300,7 +302,7 @@ struct pm80x_chip {
struct regmap_irq_chip_data *irq_data;
int type;
int irq;
- int irq_mode;
+ int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/
unsigned long wu_flag;
spinlock_t lock;
};
@@ -315,7 +317,7 @@ struct pm80x_platform_data {
*/
struct regulator_init_data *regulators[PM800_ID_RG_MAX];
unsigned int num_regulators;
- int irq_mode; /* Clear interrupt by read/write(0/1) */
+ int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */
int batt_det; /* enable/disable */
int (*plat_config)(struct pm80x_chip *chip,
struct pm80x_platform_data *pdata);
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/