Re: [PATCH RESENT] phy: tusb1210: make better use of gpiod API

[Kishon Vijay Abraham I]

Hi,

On Friday 12 June 2015 11:21 PM, Uwe Kleine-KÃnig wrote:
> Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
> which appeared in v3.17-rc1, the gpiod_get* functions take an additional
> parameter that allows to specify direction and initial value for output.
>
> Furthermore there is devm_gpiod_get_optional which is designed to get
> optional gpios.
>
> Simplify driver accordingly. Furthermore this is one caller less that
> stops us making the flags argument to gpiod_get*() mandatory.
>
> Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
> ---
> Hello,
>
> [for the initial submission I forgot linux-usb on Cc, Felipe Balbi
> requested a resend]
>
> note I plan to make the flags parameter mandatory for 4.3. So unless
> this change gets into 4.2, would it be ok to let it go in via the gpio
> tree?

This looks like a cleanup patch so it might not get in 4.2
If there is a dependency it should be fine. If you can just post this patch 
again before queuing this in your tree (for 4.3), I can see if there are 
patches that might cause merge conflicts with your change.

Thanks
Kishon
> Best regards
> Uwe
>
>   drivers/phy/phy-tusb1210.c | 30 ++++++++++++------------------
>   1 file changed, 12 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/phy-tusb1210.c
> index 07efdd318bdc..93dd45f2f26e 100644
> --- a/drivers/phy/phy-tusb1210.c
> +++ b/drivers/phy/phy-tusb1210.c
> @@ -61,32 +61,26 @@ static struct phy_ops phy_ops = {
>
>   static int tusb1210_probe(struct ulpi *ulpi)
>   {
> -	struct gpio_desc *gpio;
>   	struct tusb1210 *tusb;
>   	u8 val, reg;
> -	int ret;
>
>   	tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
>   	if (!tusb)
>   		return -ENOMEM;
>
> -	gpio = devm_gpiod_get(&ulpi->dev, "reset");
> -	if (!IS_ERR(gpio)) {
> -		ret = gpiod_direction_output(gpio, 0);
> -		if (ret)
> -			return ret;
> -		gpiod_set_value_cansleep(gpio, 1);
> -		tusb->gpio_reset = gpio;
> -	}
> +	tusb->gpio_reset = devm_gpiod_get_optional(&ulpi->dev, "reset",
> +						   GPIOD_OUT_LOW);
> +	if (IS_ERR(tusb->gpio_reset))
> +		return PTR_ERR(tusb->gpio_reset);
>
> -	gpio = devm_gpiod_get(&ulpi->dev, "cs");
> -	if (!IS_ERR(gpio)) {
> -		ret = gpiod_direction_output(gpio, 0);
> -		if (ret)
> -			return ret;
> -		gpiod_set_value_cansleep(gpio, 1);
> -		tusb->gpio_cs = gpio;
> -	}
> +	gpiod_set_value_cansleep(tusb->gpio_reset, 1);
> +
> +	tusb->gpio_cs = devm_gpiod_get_optional(&ulpi->dev, "cs",
> +						GPIOD_OUT_LOW);
> +	if (IS_ERR(tusb->gpio_cs))
> +		return PTR_ERR(tusb->gpio_cs);
> +
> +	gpiod_set_value_cansleep(tusb->gpio_cs, 1);
>
>   	/*
>   	 * VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/