Re: [PATCH 01/20] [SCSI] mpt3sas: Added Combined Reply Queue feature to extend up-to 96 MSIX vector support
From: Sreekanth Reddy
Date: Fri Jun 12 2015 - 07:16:51 EST
Thanks Johannes, we will take care of this point in our current
on-development mpt2sas/mpt3sas merging activity.
Thanks,
Sreekanth
On Fri, Jun 12, 2015 at 4:39 PM, Johannes Thumshirn <jthumshirn@xxxxxxx> wrote:
> On Fri, Jun 12, 2015 at 03:12:13PM +0530, Sreekanth Reddy wrote:
>> In this patch, increased the number of MSIX vector support for SAS3 C0 HBAs to up-to 96.
>>
>> Following are changes that are done in this patch
>> 1. Support this feature only for SAS3 C0 cards and also only when reply post free queue count is greater than 8.
>> 2. Instead of using single ReplyPostHostIndex system interface, here 12 ReplyPostHostIndex system interfaces are used. reply post free queues numbered from 0 to 7 use the first ReplyPostHostIndex system interface to update its corresponding ReplyPostHostIndex values, reply post free queues numbered from 8 to 15 will use the second ReplyPostHostIndex system interface and so on. These 12 ReplyPostHostIndex system interfaces address are saved in the array replyPostRegisterIndex[].
>> 3. Update the ReplyPostHostIndex value of corresponding reply post free queue in the (its msix_index/8)th entry of replyPostRegisterIndex[] array after processing the reply post descriptor.
>>
>> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
>> ---
>> drivers/scsi/mpt3sas/mpt3sas_base.c | 70 +++++++++++++++++++++++++++++++++----
>> drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +++-
>> 2 files changed, 69 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
>> index 14a781b..c13a365 100644
>> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
>> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
>> @@ -83,7 +83,7 @@ static int msix_disable = -1;
>> module_param(msix_disable, int, 0);
>> MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
>>
>> -static int max_msix_vectors = 8;
>> +static int max_msix_vectors = -1;
>> module_param(max_msix_vectors, int, 0);
>> MODULE_PARM_DESC(max_msix_vectors,
>> " max msix vectors - (default=8)");
>
> When changing the default value, please also update the description reflecting
> this change.
>
>> @@ -1009,8 +1009,15 @@ _base_interrupt(int irq, void *bus_id)
>> }
>>
>> wmb();
>> - writel(reply_q->reply_post_host_index | (msix_index <<
>> - MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex);
>> + if (ioc->msix96_vector) {
>> + writel(reply_q->reply_post_host_index | ((msix_index & 7) <<
>> + MPI2_RPHI_MSIX_INDEX_SHIFT),
>> + ioc->replyPostRegisterIndex[msix_index/8]);
>> + } else {
>> + writel(reply_q->reply_post_host_index | (msix_index <<
>> + MPI2_RPHI_MSIX_INDEX_SHIFT),
>> + &ioc->chip->ReplyPostHostIndex);
>> + }
>> atomic_dec(&reply_q->busy);
>> return IRQ_HANDLED;
>> }
>> @@ -1560,8 +1567,6 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
>>
>> pci_read_config_word(ioc->pdev, base + 2, &message_control);
>> ioc->msix_vector_count = (message_control & 0x3FF) + 1;
>> - if (ioc->msix_vector_count > 8)
>> - ioc->msix_vector_count = 8;
>> dinitprintk(ioc, pr_info(MPT3SAS_FMT
>> "msix is supported, vector_count(%d)\n",
>> ioc->name, ioc->msix_vector_count));
>> @@ -1880,6 +1885,31 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
>> if (r)
>> goto out_fail;
>>
>> + /* Use the Combined reply queue feature only for SAS3 C0 HBAs and
>> + * also only when reply queue count is greater than 8
>> + */
>> + if (ioc->msix96_vector && ioc->reply_queue_count > 8) {
>> + /* If this is an 96 vector supported device,
>> + set up ReplyPostIndex addresses */
>> + ioc->replyPostRegisterIndex = kcalloc(12,
>> + sizeof(resource_size_t *), GFP_KERNEL);
>> + if (!ioc->replyPostRegisterIndex) {
>> + dfailprintk(ioc, printk(MPT3SAS_FMT
>> + "allocation for reply Post Register Index failed!!!\n",
>> + ioc->name));
>> + r = -ENOMEM;
>> + goto out_fail;
>> + }
>> +
>> + for (i = 0; i < 12; i++) {
>> + ioc->replyPostRegisterIndex[i] = (resource_size_t *)
>> + ((u8 *)&ioc->chip->Doorbell +
>> + MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET +
>> + (i * 0x10));
>> + }
>> + } else
>> + ioc->msix96_vector = 0;
>> +
>> list_for_each_entry(reply_q, &ioc->reply_queue_list, list)
>> pr_info(MPT3SAS_FMT "%s: IRQ %d\n",
>> reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
>> @@ -1901,6 +1931,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
>> pci_release_selected_regions(ioc->pdev, ioc->bars);
>> pci_disable_pcie_error_reporting(pdev);
>> pci_disable_device(pdev);
>> + if (ioc->msix96_vector)
>> + kfree(ioc->replyPostRegisterIndex);
>> return r;
>> }
>>
>> @@ -4522,8 +4554,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
>>
>> /* initialize reply post host index */
>> list_for_each_entry(reply_q, &ioc->reply_queue_list, list) {
>> - writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT,
>> - &ioc->chip->ReplyPostHostIndex);
>> + if (ioc->msix96_vector) {
>> + writel((reply_q->msix_index & 7)<<
>> + MPI2_RPHI_MSIX_INDEX_SHIFT,
>> + ioc->replyPostRegisterIndex[reply_q->msix_index/8]);
>> + } else {
>> + writel(reply_q->msix_index <<
>> + MPI2_RPHI_MSIX_INDEX_SHIFT,
>> + &ioc->chip->ReplyPostHostIndex);
>> + }
>> +
>> if (!_base_is_controller_msix_enabled(ioc))
>> goto skip_init_reply_post_host_index;
>> }
>> @@ -4577,6 +4617,9 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
>> _base_free_irq(ioc);
>> _base_disable_msix(ioc);
>>
>> + if (ioc->msix96_vector)
>> + kfree(ioc->replyPostRegisterIndex);
>> +
>> if (ioc->chip_phys && ioc->chip)
>> iounmap(ioc->chip);
>> ioc->chip_phys = 0;
>> @@ -4600,6 +4643,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
>> {
>> int r, i;
>> int cpu_id, last_cpu_id = 0;
>> + u8 revision;
>>
>> dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
>> __func__));
>> @@ -4618,6 +4662,18 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
>> r = -ENOMEM;
>> goto out_free_resources;
>> }
>> + /* Check whether the controller revision is C0 or above.
>> + C0 and above revision controllers support 96 vectors */
>> + revision = ioc->pdev->revision;
>> +
>> + if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
>> + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
>> + (revision >= 0x02))
>> + ioc->msix96_vector = 1;
>>
>> ioc->rdpq_array_enable_assigned = 0;
>> ioc->dma_mask = 0;
>> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
>> index afa8816..6b8d8f1 100644
>> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
>> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
>> @@ -728,7 +728,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc);
>> * is assigned only ones
>> * @reply_queue_count: number of reply queue's
>> * @reply_queue_list: link list contaning the reply queue info
>> - * @reply_post_host_index: head index in the pool where FW completes IO
>> + * @msix96_vector: 96 MSI-X vector support
>> + * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue
>> * @delayed_tr_list: target reset link list
>> * @delayed_tr_volume_list: volume target reset link list
>> * @@temp_sensors_count: flag to carry the number of temperature sensors
>> @@ -937,6 +938,10 @@ struct MPT3SAS_ADAPTER {
>> u8 reply_queue_count;
>> struct list_head reply_queue_list;
>>
>> + u8 msix96_vector;
>> + /* reply post register index */
>> + resource_size_t **replyPostRegisterIndex;
>> +
>
> I know there are many uses of mixed-case varibles in this driver and changing
> them when they're already in makes no sense, but maybe you could consider
> getting rid of them in your mpt2sas/mpt3sas merge, as it is not really a
> commonly seen pattern in the linux kernel.
>
>> struct list_head delayed_tr_list;
>> struct list_head delayed_tr_volume_list;
>> u8 temp_sensors_count;
>> --
>> 2.0.2
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> Johannes Thumshirn Storage
> jthumshirn@xxxxxxx +49 911 74053 689
> SUSE LINUX GmbH, Maxfeldstr. 5, 90409 NÃrnberg
> GF: F. ImendÃrffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
> HRB 21284 (AG NÃrnberg)
--
Regards,
Sreekanth
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/