Re: [alsa-devel][PATCH] ASoC: fsl: add imx-wm8960 machine driver

From: Nicolin Chen
Date: Wed Jun 10 2015 - 14:36:35 EST


On Wed, Jun 10, 2015 at 04:26:27PM +0800, Zidan Wang wrote:
> This imx-wm8960 device-tree-only machine driver works with sai driver
> and have below feature.
> * support codec master and slave mode
> * support headphone jack detect
> * support headphone and micphone jack event
> * support asrc<->sai<->wm8960 mode
>
> Signed-off-by: Zidan Wang <zidan.wang@xxxxxxxxxxxxx>

Above all, could you merge this into fsl-asoc-card?

It'd be nicer to have jack detection over there. And we can
put PLL settings to the codec driver as Mark suggested.

Thanks
Nicolin

> ---
> .../devicetree/bindings/sound/imx-audio-wm8960.txt | 68 ++
> sound/soc/fsl/Kconfig | 13 +
> sound/soc/fsl/Makefile | 2 +
> sound/soc/fsl/imx-wm8960.c | 711 +++++++++++++++++++++
> 4 files changed, 794 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt
> create mode 100644 sound/soc/fsl/imx-wm8960.c
>
> diff --git a/Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt b/Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt
> new file mode 100644
> index 0000000..300d027
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/imx-audio-wm8960.txt
> @@ -0,0 +1,68 @@
> +Freescale i.MX audio complex with WM8960 codec
> +
> +Required properties:
> +
> + - compatible : "fsl,imx-audio-wm8960"
> +
> + - model : The user-visible name of this sound complex
> +
> + - audio-codec : The phandle of the WM8960 audio codec
> +
> + - hp-det : ADCLRC/GPIO1, LINPUT3/JD2 and RINPUT3/JD3 pins can
> + be selected as headphone jack detect inputs to
> + automatically disable the speaker output and enable
> + the headphone output.
> + hp-det = <hp-det-pin hp-det-polarity>;
> + hp-det-pin = 1: ADCLRC/GPIO1 used as detect pin
> + hp-det-pin = 2: LINPUT3/JD2 used as detect pin
> + hp-det-pin = 3: RINPUT3/JD3 used as detect pin
> + hp-det-polarity = 0: hp detect high for headphone
> + hp-det-polarity = 1: hp detect high for speaker
> +
> + - codec-master : If "codec-master" present, codec works as master.
> + Otherwise, codec works as slave.
> +
> + - audio-routing : A list of the connections between audio components.
> + Each entry is a pair of strings, the first being the
> + connection's sink, the second being the connection's
> + source. Valid names could be power supplies, WM8962
> + pins, and the jacks on the board:
> +
> + Power supplies:
> + * MICB
> +
> + Board connectors:
> + * Hp MIC
> + * Main MIC
> + * Headset Jack
> + * Ext Spk
> +
> +Example:
> +
> +sound {
> + compatible = "fsl,imx6ul-evk-wm8960",
> + "fsl,imx-audio-wm8960";
> + model = "wm8960-audio";
> + cpu-dai = <&sai2>;
> + audio-codec = <&codec>;
> + asrc-controller = <&asrc>;
> + codec-master;
> + hp-det = <3 0>;
> + audio-routing =
> + "Headset Jack", "HP_L",
> + "Headset Jack", "HP_R",
> + "Ext Spk", "SPK_LP",
> + "Ext Spk", "SPK_LN",
> + "Ext Spk", "SPK_RP",
> + "Ext Spk", "SPK_RN",
> + "LINPUT2", "Hp MIC",
> + "LINPUT3", "Hp MIC",
> + "RINPUT1", "Main MIC",
> + "RINPUT2", "Main MIC",
> + "Hp MIC", "MICB",
> + "Main MIC", "MICB",
> + "CPU-Playback", "ASRC-Playback",
> + "Playback", "CPU-Playback",
> + "ASRC-Capture", "CPU-Capture",
> + "CPU-Capture", "Capture";
> +};
> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
> index 19c302b..0d9aa56 100644
> --- a/sound/soc/fsl/Kconfig
> +++ b/sound/soc/fsl/Kconfig
> @@ -229,6 +229,19 @@ config SND_SOC_EUKREA_TLV320
> Enable I2S based access to the TLV320AIC23B codec attached
> to the SSI interface
>
> +config SND_SOC_IMX_WM8960
> + tristate "SoC Audio support for i.MX boards with wm8960"
> + depends on OF && I2C
> + select SND_SOC_WM8960
> + select SND_SOC_IMX_PCM_DMA
> + select SND_SOC_FSL_SAI
> + select SND_SOC_FSL_UTILS
> + select SND_KCTL_JACK
> + help
> + SoC Audio support for i.MX boards with WM8960
> + Say Y if you want to add support for SoC audio on an i.MX board with
> + a wm8960 codec.
> +
> config SND_SOC_IMX_WM8962
> tristate "SoC Audio support for i.MX boards with wm8962"
> depends on OF && I2C && INPUT
> diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
> index d28dc25..84a9a10 100644
> --- a/sound/soc/fsl/Makefile
> +++ b/sound/soc/fsl/Makefile
> @@ -54,6 +54,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
> snd-soc-wm1133-ev1-objs := wm1133-ev1.o
> snd-soc-imx-es8328-objs := imx-es8328.o
> snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
> +snd-soc-imx-wm8960-objs := imx-wm8960.o
> snd-soc-imx-wm8962-objs := imx-wm8962.o
> snd-soc-imx-spdif-objs := imx-spdif.o
> snd-soc-imx-mc13783-objs := imx-mc13783.o
> @@ -64,6 +65,7 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
> obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
> obj-$(CONFIG_SND_SOC_IMX_ES8328) += snd-soc-imx-es8328.o
> obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
> +obj-$(CONFIG_SND_SOC_IMX_WM8960) += snd-soc-imx-wm8960.o
> obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o
> obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o
> obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
> diff --git a/sound/soc/fsl/imx-wm8960.c b/sound/soc/fsl/imx-wm8960.c
> new file mode 100644
> index 0000000..ddd17cb
> --- /dev/null
> +++ b/sound/soc/fsl/imx-wm8960.c
> @@ -0,0 +1,711 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/i2c.h>
> +#include <linux/of_gpio.h>
> +#include <linux/slab.h>
> +#include <linux/gpio.h>
> +#include <linux/clk.h>
> +#include <sound/soc.h>
> +#include <sound/jack.h>
> +#include <sound/control.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc-dapm.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/mfd/syscon.h>
> +#include "../codecs/wm8960.h"
> +
> +#define DAI_NAME_SIZE 32
> +
> +struct imx_wm8960_data {
> + struct snd_soc_card card;
> + char codec_dai_name[DAI_NAME_SIZE];
> + char platform_name[DAI_NAME_SIZE];
> + struct clk *codec_clk;
> + unsigned int clk_frequency;
> + bool is_codec_master;
> + bool is_stream_in_use[2];
> + struct regmap *gpr;
> + unsigned int hp_det[2];
> + u32 asrc_rate;
> + u32 asrc_format;
> +};
> +
> +struct imx_priv {
> + int hp_set_gpio;
> + int hp_active_low;
> + struct snd_kcontrol *headset_kctl;
> + struct snd_soc_codec *codec;
> + struct platform_device *pdev;
> + struct platform_device *asrc_pdev;
> + struct snd_card *snd_card;
> +};
> +
> +static struct imx_priv card_priv;
> +
> +static struct snd_soc_jack imx_hp_set;
> +static struct snd_soc_jack_pin imx_hp_set_pins[] = {
> + {
> + .pin = "Headset Jack",
> + .mask = SND_JACK_HEADSET,
> + },
> +};
> +static struct snd_soc_jack_gpio imx_hp_set_gpio = {
> + .name = "headset detect",
> + .report = SND_JACK_HEADSET,
> + .debounce_time = 250,
> + .invert = 1,
> +};
> +
> +static int hp_set_status_check(void *data)
> +{
> + struct imx_priv *priv = &card_priv;
> + struct platform_device *pdev = priv->pdev;
> + char *envp[3], *buf;
> + int hp_status, ret;
> +
> + if (!gpio_is_valid(priv->hp_set_gpio))
> + return 0;
> +
> + hp_status = gpio_get_value(priv->hp_set_gpio) ? 1 : 0;
> + buf = kmalloc(32, GFP_ATOMIC);
> + if (!buf) {
> + dev_err(&pdev->dev, "%s kmalloc failed\n", __func__);
> + return -ENOMEM;
> + }
> +
> + if (hp_status != priv->hp_active_low) {
> + snprintf(buf, 32, "STATE=%d", 2);
> + snd_soc_dapm_disable_pin(&priv->codec->dapm, "Ext Spk");
> + snd_soc_dapm_disable_pin(&priv->codec->dapm, "Main MIC");
> + ret = imx_hp_set_gpio.report;
> +
> + /*
> + * As the hp MIC only connect the input for left channel, we
> + * need to route it for right channel.
> + */
> + snd_soc_update_bits(priv->codec, WM8960_ADDCTL1, 3<<2, 1<<2);
> +
> + snd_kctl_jack_report(priv->snd_card, priv->headset_kctl, 1);
> + } else {
> + snprintf(buf, 32, "STATE=%d", 0);
> + snd_soc_dapm_enable_pin(&priv->codec->dapm, "Ext Spk");
> + snd_soc_dapm_enable_pin(&priv->codec->dapm, "Main MIC");
> + ret = 0;
> +
> + /*
> + * As the Main MIC only connect the input for right channel,
> + * we need to route it for left channel.
> + */
> + snd_soc_update_bits(priv->codec, WM8960_ADDCTL1, 3<<2, 2<<2);
> +
> + snd_kctl_jack_report(priv->snd_card, priv->headset_kctl, 0);
> + }
> +
> + envp[0] = "NAME=headset";
> + envp[1] = buf;
> + envp[2] = NULL;
> + kobject_uevent_env(&pdev->dev.kobj, KOBJ_CHANGE, envp);
> + kfree(buf);
> +
> + return ret;
> +}
> +
> +static const struct snd_soc_dapm_widget imx_wm8960_dapm_widgets[] = {
> + SND_SOC_DAPM_HP("Headset Jack", NULL),
> + SND_SOC_DAPM_SPK("Ext Spk", NULL),
> + SND_SOC_DAPM_MIC("Hp MIC", NULL),
> + SND_SOC_DAPM_MIC("Main MIC", NULL),
> +};
> +
> +static int imx_wm8960_gpio_init(struct snd_soc_card *card)
> +{
> + struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct imx_priv *priv = &card_priv;
> + int ret;
> +
> + priv->codec = codec;
> +
> + if (gpio_is_valid(priv->hp_set_gpio)) {
> + imx_hp_set_gpio.gpio = priv->hp_set_gpio;
> + imx_hp_set_gpio.jack_status_check = hp_set_status_check;
> +
> + ret = snd_soc_card_jack_new(card, "Headset Jack",
> + SND_JACK_HEADSET, &imx_hp_set,
> + imx_hp_set_pins, ARRAY_SIZE(imx_hp_set_pins));
> + if (ret)
> + return ret;
> + ret = snd_soc_jack_add_gpios(&imx_hp_set, 1,
> + &imx_hp_set_gpio);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static ssize_t show_headphone(struct device_driver *dev, char *buf)
> +{
> + struct imx_priv *priv = &card_priv;
> + int hp_status;
> +
> + if (!gpio_is_valid(priv->hp_set_gpio)) {
> + strcpy(buf, "no detect gpio connected\n");
> + return strlen(buf);
> + }
> +
> + /* Check if headphone is plugged in */
> + hp_status = gpio_get_value(priv->hp_set_gpio) ? 1 : 0;
> +
> + if (hp_status != priv->hp_active_low)
> + strcpy(buf, "Headphone\n");
> + else
> + strcpy(buf, "Speaker\n");
> +
> + return strlen(buf);
> +}
> +
> +static ssize_t show_micphone(struct device_driver *dev, char *buf)
> +{
> + struct imx_priv *priv = &card_priv;
> + int hp_status;
> +
> + if (!gpio_is_valid(priv->hp_set_gpio)) {
> + strcpy(buf, "no detect gpio connected\n");
> + return strlen(buf);
> + }
> +
> + /* Check if headphone is plugged in */
> + hp_status = gpio_get_value(priv->hp_set_gpio) ? 1 : 0;
> +
> + if (hp_status != priv->hp_active_low)
> + strcpy(buf, "Hp MIC\n");
> + else
> + strcpy(buf, "Main MIC\n");
> +
> + return strlen(buf);
> +}
> +static DRIVER_ATTR(headphone, S_IRUGO | S_IWUSR, show_headphone, NULL);
> +static DRIVER_ATTR(micphone, S_IRUGO | S_IWUSR, show_micphone, NULL);
> +
> +static void wm8960_init(struct snd_soc_card *card)
> +{
> + struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +
> + /*
> + * codec ADCLRC pin configured as GPIO, DACLRC pin is used as
> + * a frame clock for ADCs and DACs
> + */
> + snd_soc_update_bits(codec, WM8960_IFACE2, 1<<6, 1<<6);
> +
> + /* GPIO1 used as headphone detect output */
> + snd_soc_update_bits(codec, WM8960_ADDCTL4, 7<<4, 3<<4);
> +
> + /* Enable headphone jack detect */
> + snd_soc_update_bits(codec, WM8960_ADDCTL2, 1<<6, 1<<6);
> + snd_soc_update_bits(codec, WM8960_ADDCTL2, 1<<5, data->hp_det[1]<<5);
> + snd_soc_update_bits(codec, WM8960_ADDCTL4, 3<<2, data->hp_det[0]<<2);
> + snd_soc_update_bits(codec, WM8960_ADDCTL1, 3, 3);
> +
> + /* route ADC left channel to right channel in default */
> + snd_soc_update_bits(codec, WM8960_ADDCTL1, 3<<2, 1<<2);
> +}
> +
> +/* -1 for reserved value */
> +static const int sysclk_divs[] = { 1, -1, 2, -1 };
> +
> +/* Multiply 256 for internal 256 div */
> +static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 };
> +
> +/* Multiply 10 to eliminate decimials */
> +static const int bclk_divs[] = {
> + 10, 15, 20, 30, 40, 55, 60, 80, 110,
> + 120, 160, 220, 240, 320, 320, 320
> +};
> +
> +static int imx_hifi_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_dai *codec_dai = rtd->codec_dai;
> + struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
> + struct snd_soc_card *card = rtd->card;
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> + struct device *dev = card->dev;
> + unsigned int sample_rate = params_rate(params);
> + unsigned int sysclk, pll_in, pll_out;
> + int i, j, k, ret = 0;
> + int bclk = snd_soc_params_to_bclk(params);
> + unsigned int fmt, plln;
> +
> + if (params_channels(params) == 1)
> + bclk *= 2;
> +
> + data->is_stream_in_use[tx] = true;
> +
> + if (data->is_stream_in_use[!tx])
> + return 0;
> +
> + if (data->is_codec_master)
> + fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> + SND_SOC_DAIFMT_CBM_CFM;
> + else
> + fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> + SND_SOC_DAIFMT_CBS_CFS;
> +
> + /* set cpu DAI configuration */
> + ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
> + if (ret) {
> + dev_err(dev, "failed to set cpu dai fmt: %d\n", ret);
> + return ret;
> + }
> + /* set codec DAI configuration */
> + ret = snd_soc_dai_set_fmt(codec_dai, fmt);
> + if (ret) {
> + dev_err(dev, "failed to set codec dai fmt: %d\n", ret);
> + return ret;
> + }
> +
> + if (!data->is_codec_master) {
> + ret = snd_soc_dai_set_tdm_slot(cpu_dai,
> + 0, 0, 2, params_width(params));
> + if (ret) {
> + dev_err(dev,
> + "failed to set cpu dai tdm slot: %d\n", ret);
> + return ret;
> + }
> +
> + ret = snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_OUT);
> + if (ret) {
> + dev_err(dev, "failed to set cpu sysclk: %d\n", ret);
> + return ret;
> + }
> + return 0;
> + } else {
> + ret = snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_IN);
> + if (ret) {
> + dev_err(dev, "failed to set cpu sysclk: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + data->clk_frequency = clk_get_rate(data->codec_clk);
> +
> + /* Use MCLK to provide sysclk directly */
> + sysclk = data->clk_frequency;
> +
> + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
> + if (sysclk_divs[i] == -1)
> + continue;
> + sysclk /= sysclk_divs[i];
> + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
> + if (sysclk == sample_rate * dac_divs[j]) {
> + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
> + if (sysclk == bclk * bclk_divs[k] / 10)
> + break;
> + if (k != ARRAY_SIZE(bclk_divs))
> + break;
> + }
> + }
> + if (j != ARRAY_SIZE(dac_divs))
> + break;
> + }
> + if (i != ARRAY_SIZE(sysclk_divs)) {
> + /* Set codec sysclk */
> + snd_soc_dai_set_sysclk(codec_dai,
> + WM8960_SYSCLK_MCLK, sysclk, 0);
> + snd_soc_dai_set_clkdiv(codec_dai, WM8960_SYSCLKDIV, i << 1);
> + return 0;
> + }
> +
> + /* Use PLL to provide sysclk */
> + pll_in = data->clk_frequency;
> +
> + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
> + if (sysclk_divs[i] == -1)
> + continue;
> + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
> + sysclk = sample_rate * dac_divs[j];
> + pll_out = sysclk * sysclk_divs[i];
> + /*
> + * we should make sure 5 < plln < 13, or we can't get
> + * such pll_out.
> + */
> + plln = pll_out * 4 / pll_in;
> + if (plln < 6)
> + plln *= 2;
> + if ((plln < 6) || (plln > 12))
> + continue;
> + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
> + if (sysclk == bclk * bclk_divs[k] / 10) {
> + /* Set codec pll */
> + ret = snd_soc_dai_set_pll(codec_dai, 0,
> + 0, data->clk_frequency,
> + pll_out);
> + if (ret != 0)
> + continue;
> + else
> + break;
> + }
> + }
> + if (k != ARRAY_SIZE(bclk_divs))
> + break;
> + }
> + if (j != ARRAY_SIZE(dac_divs))
> + break;
> + }
> + if (i != ARRAY_SIZE(sysclk_divs)) {
> + /* Set codec sysclk */
> + snd_soc_dai_set_sysclk(codec_dai, WM8960_SYSCLK_PLL, sysclk, 0);
> + snd_soc_dai_set_clkdiv(codec_dai, WM8960_SYSCLKDIV, i << 1);
> + return 0;
> + }
> +
> + dev_err(dev, "failed to configure system clock");
> + return -EINVAL;
> +}
> +
> +static int imx_hifi_hw_free(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_dai *codec_dai = rtd->codec_dai;
> + struct snd_soc_card *card = rtd->card;
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> +
> + data->is_stream_in_use[tx] = false;
> +
> + /* Power down PLL to save power*/
> + if (data->is_codec_master && !data->is_stream_in_use[!tx])
> + snd_soc_dai_set_pll(codec_dai, 0, 0, 0, 0);
> +
> + return 0;
> +}
> +
> +static u32 imx_wm8960_rates[] = { 8000, 16000, 32000, 48000 };
> +static struct snd_pcm_hw_constraint_list imx_wm8960_rate_constraints = {
> + .count = ARRAY_SIZE(imx_wm8960_rates),
> + .list = imx_wm8960_rates,
> +};
> +
> +static int imx_hifi_startup(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> + int ret = 0;
> +
> + if (!data->is_codec_master) {
> + ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
> + SNDRV_PCM_HW_PARAM_RATE,
> + &imx_wm8960_rate_constraints);
> + if (ret)
> + return ret;
> + }
> +
> + /* codec mclk should be enabled early to avoid jack detect error */
> + ret = clk_prepare_enable(data->codec_clk);
> + if (ret) {
> + dev_err(card->dev, "Failed to enable MCLK: %d\n", ret);
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static void imx_hifi_shutdown(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +
> + clk_disable_unprepare(data->codec_clk);
> +}
> +
> +static struct snd_soc_ops imx_hifi_ops = {
> + .hw_params = imx_hifi_hw_params,
> + .hw_free = imx_hifi_hw_free,
> + .startup = imx_hifi_startup,
> + .shutdown = imx_hifi_shutdown,
> +};
> +
> +static int imx_wm8960_late_probe(struct snd_soc_card *card)
> +{
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> +
> + /* set SAI2_MCLK_DIR to enable codec MCLK */
> + if (data->gpr)
> + regmap_update_bits(data->gpr, 4, 1<<20, 1<<20);
> +
> + wm8960_init(card);
> + return 0;
> +}
> +
> +static int be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_card *card = rtd->card;
> + struct imx_wm8960_data *data = snd_soc_card_get_drvdata(card);
> + struct imx_priv *priv = &card_priv;
> + struct snd_interval *rate;
> + struct snd_mask *mask;
> +
> + if (!priv->asrc_pdev)
> + return -EINVAL;
> +
> + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
> + rate->max = rate->min = data->asrc_rate;
> +
> + mask = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
> + snd_mask_none(mask);
> + snd_mask_set(mask, data->asrc_format);
> +
> + return 0;
> +}
> +
> +static struct snd_soc_dai_link imx_wm8960_dai[] = {
> + {
> + .name = "HiFi",
> + .stream_name = "HiFi",
> + .codec_dai_name = "wm8960-hifi",
> + .ops = &imx_hifi_ops,
> + },
> + {
> + .name = "HiFi-ASRC-FE",
> + .stream_name = "HiFi-ASRC-FE",
> + .codec_name = "snd-soc-dummy",
> + .codec_dai_name = "snd-soc-dummy-dai",
> + .dynamic = 1,
> + .ignore_pmdown_time = 1,
> + .dpcm_playback = 1,
> + .dpcm_capture = 1,
> + },
> + {
> + .name = "HiFi-ASRC-BE",
> + .stream_name = "HiFi-ASRC-BE",
> + .codec_dai_name = "wm8960-hifi",
> + .platform_name = "snd-soc-dummy",
> + .no_pcm = 1,
> + .ignore_pmdown_time = 1,
> + .dpcm_playback = 1,
> + .dpcm_capture = 1,
> + .ops = &imx_hifi_ops,
> + .be_hw_params_fixup = be_hw_params_fixup,
> + },
> +};
> +
> +static int imx_wm8960_probe(struct platform_device *pdev)
> +{
> + struct device_node *cpu_np, *codec_np, *gpr_np;
> + struct platform_device *cpu_pdev;
> + struct imx_priv *priv = &card_priv;
> + struct i2c_client *codec_dev;
> + struct imx_wm8960_data *data;
> + struct platform_device *asrc_pdev = NULL;
> + struct device_node *asrc_np;
> + u32 width;
> + int ret;
> +
> + priv->pdev = pdev;
> +
> + cpu_np = of_parse_phandle(pdev->dev.of_node, "cpu-dai", 0);
> + if (!cpu_np) {
> + dev_err(&pdev->dev, "cpu dai phandle missing or invalid\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
> + if (!codec_np) {
> + dev_err(&pdev->dev, "phandle missing or invalid\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + cpu_pdev = of_find_device_by_node(cpu_np);
> + if (!cpu_pdev) {
> + dev_err(&pdev->dev, "failed to find SAI platform device\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + codec_dev = of_find_i2c_device_by_node(codec_np);
> + if (!codec_dev || !codec_dev->dev.driver) {
> + dev_err(&pdev->dev, "failed to find codec platform device\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data) {
> + ret = -ENOMEM;
> + goto fail;
> + }
> +
> + if (of_property_read_bool(pdev->dev.of_node, "codec-master"))
> + data->is_codec_master = true;
> +
> + data->codec_clk = devm_clk_get(&codec_dev->dev, "mclk");
> + if (IS_ERR(data->codec_clk)) {
> + ret = PTR_ERR(data->codec_clk);
> + dev_err(&pdev->dev, "failed to get codec clk: %d\n", ret);
> + goto fail;
> + }
> +
> + gpr_np = of_parse_phandle(pdev->dev.of_node, "gpr", 0);
> + if (gpr_np) {
> + data->gpr = syscon_node_to_regmap(gpr_np);
> + if (IS_ERR(data->gpr)) {
> + ret = PTR_ERR(data->gpr);
> + dev_err(&pdev->dev, "failed to get gpr regmap\n");
> + goto fail;
> + }
> + }
> +
> + /*
> + * hp-det = <hp-det-pin hp-det-polarity>;
> + * hp-det-pin: JD1 JD2 or JD3
> + * hp-det-polarity = 0: hp detect high for headphone
> + * hp-det-polarity = 1: hp detect high for speaker
> + */
> + of_property_read_u32_array(pdev->dev.of_node,
> + "hp-det", data->hp_det, 2);
> +
> + asrc_np = of_parse_phandle(pdev->dev.of_node, "asrc-controller", 0);
> + if (asrc_np) {
> + asrc_pdev = of_find_device_by_node(asrc_np);
> + priv->asrc_pdev = asrc_pdev;
> + }
> +
> + data->card.dai_link = imx_wm8960_dai;
> +
> + imx_wm8960_dai[0].codec_of_node = codec_np;
> + imx_wm8960_dai[0].cpu_dai_name = dev_name(&cpu_pdev->dev);
> + imx_wm8960_dai[0].platform_of_node = cpu_np;
> +
> + if (!asrc_pdev) {
> + data->card.num_links = 1;
> + } else {
> + imx_wm8960_dai[1].cpu_of_node = asrc_np;
> + imx_wm8960_dai[1].platform_of_node = asrc_np;
> + imx_wm8960_dai[2].codec_of_node = codec_np;
> + imx_wm8960_dai[2].cpu_dai_name = dev_name(&cpu_pdev->dev);
> + data->card.num_links = 3;
> +
> + ret = of_property_read_u32(asrc_np, "fsl,asrc-rate",
> + &data->asrc_rate);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to get output rate\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + ret = of_property_read_u32(asrc_np, "fsl,asrc-width", &width);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to get output rate\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + if (width == 24)
> + data->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
> + else
> + data->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
> + }
> +
> + data->card.dev = &pdev->dev;
> + ret = snd_soc_of_parse_card_name(&data->card, "model");
> + if (ret)
> + goto fail;
> + data->card.dapm_widgets = imx_wm8960_dapm_widgets;
> + data->card.num_dapm_widgets = ARRAY_SIZE(imx_wm8960_dapm_widgets);
> +
> + ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
> + if (ret)
> + goto fail;
> +
> + data->card.late_probe = imx_wm8960_late_probe;
> +
> + platform_set_drvdata(pdev, &data->card);
> + snd_soc_card_set_drvdata(&data->card, data);
> + ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register card (%d)\n", ret);
> + goto fail;
> + }
> +
> + priv->snd_card = data->card.snd_card;
> +
> + priv->hp_set_gpio = of_get_named_gpio_flags(pdev->dev.of_node,
> + "hp-det-gpios", 0,
> + (enum of_gpio_flags *)&priv->hp_active_low);
> + if (IS_ERR(ERR_PTR(priv->hp_set_gpio)))
> + goto fail;
> +
> + priv->headset_kctl = snd_kctl_jack_new("Headset", priv->snd_card);
> + ret = snd_ctl_add(data->card.snd_card, priv->headset_kctl);
> + if (ret)
> + goto fail;
> +
> + ret = imx_wm8960_gpio_init(&data->card);
> +
> + if (gpio_is_valid(priv->hp_set_gpio)) {
> + ret = driver_create_file(pdev->dev.driver,
> + &driver_attr_headphone);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "create hp attr failed (%d)\n", ret);
> + goto fail;
> + }
> + ret = driver_create_file(pdev->dev.driver,
> + &driver_attr_micphone);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "create mic attr failed (%d)\n", ret);
> + goto fail;
> + }
> + }
> +fail:
> + if (cpu_np)
> + of_node_put(cpu_np);
> + if (codec_np)
> + of_node_put(codec_np);
> +
> + return ret;
> +}
> +
> +static const struct of_device_id imx_wm8960_dt_ids[] = {
> + { .compatible = "fsl,imx-audio-wm8960", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx_wm8960_dt_ids);
> +
> +static struct platform_driver imx_wm8960_driver = {
> + .driver = {
> + .name = "imx-wm8960",
> + .owner = THIS_MODULE,
> + .pm = &snd_soc_pm_ops,
> + .of_match_table = imx_wm8960_dt_ids,
> + },
> + .probe = imx_wm8960_probe,
> +};
> +module_platform_driver(imx_wm8960_driver);
> +
> +MODULE_AUTHOR("Freescale Semiconductor, Inc.");
> +MODULE_DESCRIPTION("Freescale i.MX WM8960 ASoC machine driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:imx-wm8960");
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/