Re: [PATCH v4 12/12] MIPS: Add basic support for the TL-WR1043ND version 1

From: Antony Pavlov
Date: Mon Jun 08 2015 - 06:12:06 EST


On Sun, 31 May 2015 02:18:26 +0200
Alban Bedel <albeu@xxxxxxx> wrote:

> Add a DTS for TL-WR1043ND version 1 and allow to have it built in the
> kernel to circumvent the broken u-boot found on these boards.
> Currently only the UART, LEDs and buttons are supported.
>
> Signed-off-by: Alban Bedel <albeu@xxxxxxx>

> --- /dev/null
> +++ b/arch/mips/boot/dts/qca/ar9132.dtsi


> +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
> @@ -0,0 +1,112 @@
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +#include "ar9132.dtsi"
> +
> +/ {
> + compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
> + model = "TP-Link TL-WR1043ND Version 1";
> +
> + alias {
> + serial0 = "/ahb/apb/uart@18020000";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x2000000>;
> + };
> +
> + extosc: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <40000000>;
> + };
> +
> + ahb {
> + apb {
> + uart@18020000 {
> + status = "okay";
> + };
> +
> + pll-controller@18050000 {
> + clocks = <&extosc>;

IMHO AR9132 SoC can't work without external oscilator.

Can we just move basic extosc declaration to SoC dt file (ar9132.dtsi)?
So board dt file ar9132_tl_wr1043nd_v1.dts will contain only oscilator
clock frequency value.

E.g.

ar9132.dtsi:
============

extosc: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
...
ahb {
apb {

...

pll-controller@18050000 {
...
clocks = <&extosc>;
...



ar9132_tl_wr1043nd_v1.dts:
==========================

...
&extosc {
clock-frequency = <40000000>;
};


-- 
Best regards,
  Antony Pavlov
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/