Re: [PATCH v9 1/10] x86, mm, pat: Set WT to PA7 slot of PAT MSR

[Thomas Gleixner]

On Wed, 13 May 2015, Toshi Kani wrote:
> This patch sets WT to the PA7 slot in the PAT MSR when the processor
> is not affected by the PAT errata.  The PA7 slot is chosen to improve
> robustness in the presence of errata that might cause the high PAT bit
> to be ignored.  This way a buggy PA7 slot access will hit the PA3 slot,
> which is UC, so at worst we lose performance without causing a correctness
> issue.
> 
> The following Intel processors are affected by the PAT errata.
> 
>    errata               cpuid
>    ----------------------------------------------------
>    Pentium 2, A52       family 0x6, model 0x5
>    Pentium 3, E27       family 0x6, model 0x7, 0x8
>    Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa
>    Pentium M, Y26       family 0x6, model 0x9
>    Pentium M 90nm, X9   family 0x6, model 0xd
>    Pentium 4, N46       family 0xf, model 0x0
> 
> Instead of making sharp boundary checks, this patch makes conservative
> checks to exclude all Pentium 2, 3, M and 4 family processors.  For
> such processors, _PAGE_CACHE_MODE_WT is redirected to UC- per the
> default setup in __cachemode2pte_tbl[].
> 
> Signed-off-by: Toshi Kani <toshi.kani@xxxxxx>
> Reviewed-by: Juergen Gross <jgross@xxxxxxxx>

Reviewed-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/