Re: [PATCH v2 6/6] usb: chipidea: add work-around for Marvell HSIC PHY startup

[Peter Chen]

On Tue, May 19, 2015 at 09:10:05PM -0500, Rob Herring wrote:
> The Marvell 28nm HSIC PHY requires the port to be forced to HS mode after
> the port power is applied. This is done using the test mode in the PORTSC
> register.
> 
> As HSIC is always HS, this work-around should be safe to do with all HSIC
> PHYs. If not, a flag can also be added.

I think a flag is needed, not sure all vendors can work well with that.

> 
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> Cc: Peter Chen <Peter.Chen@xxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> ---
>  drivers/usb/chipidea/host.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index 21fe1a3..6cf87b8 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -37,12 +37,14 @@ static int (*orig_bus_suspend)(struct usb_hcd *hcd);
>  
>  struct ehci_ci_priv {
>  	struct regulator *reg_vbus;
> +	struct ci_hdrc *ci;
>  };
>  
>  static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
>  {
>  	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
>  	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
> +	struct ci_hdrc *ci = priv->ci;
>  	struct device *dev = hcd->self.controller;
>  	int ret = 0;
>  	int port = HCS_N_PORTS(ehci->hcs_params);
> @@ -64,6 +66,15 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
>  			return ret;
>  		}
>  	}
> +
> +	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
> +		/*
> +		 * Marvell 28nm HSIC PHY requires forcing the port to HS mode.
> +		 * As HSIC is always HS, this should be safe for others.
> +		 */
> +		hw_port_test_set(ci, 5);
> +		hw_port_test_set(ci, 0);
> +	}
>  	return 0;
>  };
>  
> @@ -112,6 +123,7 @@ static int host_start(struct ci_hdrc *ci)
>  
>  	priv = (struct ehci_ci_priv *)ehci->priv;
>  	priv->reg_vbus = NULL;
> +	priv->ci = ci;
>  
>  	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
>  		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
> -- 
> 2.1.0
> 

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/