Re: [PATCH v7 6/7] clk: hi6220: Clock driver support for Hisilicon hi6220 SoC

From: Stephen Boyd
Date: Wed May 20 2015 - 18:26:09 EST


On 05/20/15 03:29, Bintian Wang wrote:
> Add clock drivers for hi6220 SoC, this driver controls the SoC
> registers to supply different clocks to different IPs in the SoC.
>
> We add one divider clock for hi6220 because the divider in hi6220
> also has a mask bit but it doesnot obey the rule defined by flag
> "CLK_DIVIDER_HIWORD_MASK", we can not get index of the mask bit by
> left shift fixed bits (e.g. 16 bits), so we add this divider clock
> to handle it.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
> Signed-off-by: Bintian Wang <bintian.wang@xxxxxxxxxx>
> Acked-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxxx>
> Reviewed-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
> Tested-by: Will Deacon <will.deacon@xxxxxxx>
> Tested-by: Tyler Baker <tyler.baker@xxxxxxxxxx>
> ---
> drivers/clk/Kconfig | 2 +
> drivers/clk/Makefile | 4 +-
> drivers/clk/hisilicon/Kconfig | 6 +
> drivers/clk/hisilicon/Makefile | 3 +-
> drivers/clk/hisilicon/clk-hi6220.c | 291 +++++++++++++++++++++++++++++
> drivers/clk/hisilicon/clk.c | 29 +++
> drivers/clk/hisilicon/clk.h | 17 ++
> drivers/clk/hisilicon/clkdivider-hi6220.c | 156 ++++++++++++++++
> include/dt-bindings/clock/hi6220-clock.h | 173 +++++++++++++++++
> 9 files changed, 677 insertions(+), 4 deletions(-)
> create mode 100644 drivers/clk/hisilicon/Kconfig
> create mode 100644 drivers/clk/hisilicon/clk-hi6220.c
> create mode 100644 drivers/clk/hisilicon/clkdivider-hi6220.c
> create mode 100644 include/dt-bindings/clock/hi6220-clock.h
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 9897f35..18bb930 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -150,6 +150,8 @@ config COMMON_CLK_CDCE706
> ---help---
> This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
>
> +source "drivers/clk/hisilicon/Kconfig"
> +
> source "drivers/clk/qcom/Kconfig"
>

There's going to be a merge conflict here if this doesn't go through the
clk tree.

>
> +
> +static void __init hi6220_clk_sys_init(struct device_node *np)
> +{
> + struct hisi_clock_data *clk_data;
> +
> + clk_data = hisi_clk_init(np, HI6220_SYS_NR_CLKS);
> + if (!clk_data)
> + return;
> +
> + hisi_clk_register_gate_sep(hi6220_separated_gate_clks_sys,
> + ARRAY_SIZE(hi6220_separated_gate_clks_sys), clk_data);
> +
> + hisi_clk_register_mux(hi6220_mux_clks_sys,
> + ARRAY_SIZE(hi6220_mux_clks_sys), clk_data);
> +
> + hi6220_clk_register_divider(hi6220_div_clks_sys,
> + ARRAY_SIZE(hi6220_div_clks_sys), clk_data);
> +
> + if (!clk_data_ao)
> + return;
> +
> + /* enable high speed clock on UART1 mux */
> + clk_set_parent(clk_data->clk_data.clks[HI6220_UART1_SRC],
> + clk_data_ao->clk_data.clks[HI6220_150M]);

Sorry I missed this one earlier. Can we do this clk_set_parent() through
assigned-parents instead? I expected an #include <linux/clk.h> for the
usage of clk_set_parent() here so I didn't look hard to see if consumer
APIs were being used.

Otherwise the patch looks fine.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/