[PATCH v2 3/3] gpiolib: debugfs: identify gpios requested as irq only

From: Grygorii Strashko
Date: Wed May 20 2015 - 06:30:58 EST


Now many of GPIO drivers implement two interfaces gpiolib and irqchip
which are essentially orthogonal. So, now GPIO line can be requested
in three ways:
1) As pure GPIO (gpioX_request())
2) As pure GPIO IRQ, especially in DT boot case.
DT:
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
Code:
platform_get_irq() or of_irq_get()
request_irq()
3) combination of (1) and (2).

And from GPIO debugfs it could be identified when GPIO is
requested/used or used as IRQ, but there is no way to determine
when GPIO is requested/used as IRQ only.

Such information is useful for debugging, so update GPIO debugfs code
to show marker '<irq-only>' for GPIO lines which are requested/used as
GPIO IRQ only.

After this patch sys/kernel/debug/gpio will produce following output:
...
GPIOs 160-191, platform/4805d000.gpio, gpio:
gpio-171 ((null) ) in hi IRQ-209 <irq-only>

GPIOs 192-223, platform/48051000.gpio, gpio:
gpio-203 (vtt_fixed ) out hi

Cc: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxxxxxx>
---
drivers/gpio/gpiolib.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index f1dcb5b..d69fc58 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2272,8 +2272,11 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
chip->get
? (chip->get(chip, i) ? "hi" : "lo")
: "? ");
- if (is_irq)
+ if (is_irq) {
seq_printf(s, " IRQ-%d", gpiod_to_irq(gdesc));
+ if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
+ seq_puts(s, " <irq-only>");
+ }
seq_printf(s, "\n");
}
}
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/