Re: [PATCH v2] arm, imx6, dts: add DT for aristainetos2 board

From: Heiko Schocher
Date: Tue May 19 2015 - 09:44:39 EST


Hello Philipp,

Am 19.05.2015 10:48, schrieb Philipp Zabel:
Hi Heiko, Shawn,

Am Dienstag, den 19.05.2015, 09:09 +0200 schrieb Heiko Schocher:
[...]
What is this? I failed to find it in Documentation/devicetree/bindings/

Ah, this is not documentated, see commit:

commit 628f435be4359e6ae8ecfdda9b492053be76a057
Author: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Date: Tue Feb 25 11:55:04 2014 +0100

imx-drm: parallel-display: Add drm_panel support

added Philipp to cc ...

This was meant to be a temporary solution to connect a drm_panel to the
parallel-display when the of-graph bindings were not yet available.
I'd very much prefer to switch to the common of-graph bindings similarly
to the LDB driver instead. Could you check if this would work for you:

Yes, your patch works for me (with appropriate changes in the dts file)
You can add my
Tested-by: Heiko Schocher <hs@xxxxxxx>
for this patch, thanks!

@Shawn: How do I proceed now with my patch for the aristainetos2 board
support? Should I base my v3 of the aristainetos2 on this patch,
or should I wait with this change, until the patch from Philipp
is accepted and post a follow up?

bye,
Heiko

-----8<-----
From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Subject: [PATCH] drm/imx: parallel-display: fix drm_panel support

The parallel-display driver used an undocumented, non-standard property
"fsl,panel" to optionally associate with a drm_panel device. This patch
fixes the driver to use the OF graph bindings, just as the LDB driver:

parallel-display {
compatible = "fsl,imx-parallel-display";
...

port@1 {
reg = <1>;

parallel_out: endpoint {
remote_endpoint = <&panel_in>;
};
};
};

panel {
...

port {
panel_in: endpoint {
remote-endpoint = <&parallel_out>;
};
};
};

Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/drm/imx/fsl-imx-drm.txt | 26 ++++++++++++++++++++--
drivers/gpu/drm/imx/parallel-display.c | 21 ++++++++++++-----
2 files changed, 39 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e5..971c3ee 100644
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
@@ -65,8 +65,10 @@ Optional properties:
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0 is the input port connected to the IPU display interface,
+ port 1 is the output port connected to a panel.

example:

@@ -75,9 +77,29 @@ display@di0 {
edid = [edid-data];
interface-pix-fmt = "rgb24";

- port {
+ port@0 {
+ reg = <0>;
+
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+panel {
+ ...
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
};
diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index 74a9ce4..b4deb9c 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -21,6 +21,7 @@
#include <drm/drm_panel.h>
#include <linux/videodev2.h>
#include <video/of_display_timing.h>
+#include <linux/of_graph.h>

#include "imx-drm.h"

@@ -208,7 +209,7 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
{
struct drm_device *drm = data;
struct device_node *np = dev->of_node;
- struct device_node *panel_node;
+ struct device_node *port;
const u8 *edidp;
struct imx_parallel_display *imxpd;
int ret;
@@ -234,11 +235,19 @@ static int imx_pd_bind(struct device *dev, struct device *master, void *data)
imxpd->bus_format = MEDIA_BUS_FMT_RGB666_1X24_CPADHI;
}

- panel_node = of_parse_phandle(np, "fsl,panel", 0);
- if (panel_node) {
- imxpd->panel = of_drm_find_panel(panel_node);
- if (!imxpd->panel)
- return -EPROBE_DEFER;
+ /* port@1 is the output port */
+ port = of_graph_get_port_by_id(np, 1);
+ if (port) {
+ struct device_node *endpoint, *remote;
+
+ endpoint = of_get_child_by_name(port, "endpoint");
+ if (endpoint) {
+ remote = of_graph_get_remote_port_parent(endpoint);
+ if (remote)
+ imxpd->panel = of_drm_find_panel(remote);
+ if (!imxpd->panel)
+ return -EPROBE_DEFER;
+ }
}

imxpd->dev = dev;


--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/