[RFC PATCH 2/2] iio: accel: kxcjk1013: Use the new IIO pm runtime helpers

From: Daniel Baluta
Date: Mon May 18 2015 - 12:24:41 EST


Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx>
---
drivers/iio/accel/kxcjk-1013.c | 56 +++++++++++-------------------------------
1 file changed, 14 insertions(+), 42 deletions(-)

diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index a98b5d2..308499a 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -22,12 +22,12 @@
#include <linux/acpi.h>
#include <linux/gpio/consumer.h>
#include <linux/pm.h>
-#include <linux/pm_runtime.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/events.h>
+#include <linux/iio/pm_runtime.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/accel/kxcjk_1013.h>
@@ -376,29 +376,6 @@ static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data)
}
#endif

-static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
-{
-#ifdef CONFIG_PM
- int ret;
-
- if (on)
- ret = pm_runtime_get_sync(&data->client->dev);
- else {
- pm_runtime_mark_last_busy(&data->client->dev);
- ret = pm_runtime_put_autosuspend(&data->client->dev);
- }
- if (ret < 0) {
- dev_err(&data->client->dev,
- "Failed: kxcjk1013_set_power_state for %d\n", on);
- if (on)
- pm_runtime_put_noidle(&data->client->dev);
- return ret;
- }
-#endif
-
- return 0;
-}
-
static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
{
int ret;
@@ -700,19 +677,22 @@ static int kxcjk1013_read_raw(struct iio_dev *indio_dev,
if (iio_buffer_enabled(indio_dev))
ret = -EBUSY;
else {
- ret = kxcjk1013_set_power_state(data, true);
+ ret = iio_pm_runtime_set_power(&data->client->dev,
+ true);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
}
ret = kxcjk1013_get_acc_reg(data, chan->scan_index);
if (ret < 0) {
- kxcjk1013_set_power_state(data, false);
+ iio_pm_runtime_set_power(&data->client->dev,
+ false);
mutex_unlock(&data->mutex);
return ret;
}
*val = sign_extend32(ret >> 4, 11);
- ret = kxcjk1013_set_power_state(data, false);
+ ret = iio_pm_runtime_set_power(&data->client->dev,
+ false);
}
mutex_unlock(&data->mutex);

@@ -855,7 +835,7 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
* enable operation. When runtime pm is disabled the mode
* is always on so sequence doesn't matter
*/
- ret = kxcjk1013_set_power_state(data, state);
+ ret = iio_pm_runtime_set_power(&data->client->dev, state);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
@@ -863,7 +843,7 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,

ret = kxcjk1013_setup_any_motion_interrupt(data, state);
if (ret < 0) {
- kxcjk1013_set_power_state(data, false);
+ iio_pm_runtime_set_power(&data->client->dev, false);
data->ev_enable_state = 0;
mutex_unlock(&data->mutex);
return ret;
@@ -1005,7 +985,7 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
return 0;
}

- ret = kxcjk1013_set_power_state(data, state);
+ ret = iio_pm_runtime_set_power(&data->client->dev, state);
if (ret < 0) {
mutex_unlock(&data->mutex);
return ret;
@@ -1015,7 +995,7 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
else
ret = kxcjk1013_setup_new_data_interrupt(data, state);
if (ret < 0) {
- kxcjk1013_set_power_state(data, false);
+ iio_pm_runtime_set_power(&data->client->dev, false);
mutex_unlock(&data->mutex);
return ret;
}
@@ -1293,16 +1273,11 @@ static int kxcjk1013_probe(struct i2c_client *client,
dev_err(&client->dev, "unable to register iio device\n");
goto err_buffer_cleanup;
}
-
- ret = pm_runtime_set_active(&client->dev);
+ ret = iio_pm_runtime_setup(&client->dev, KXCJK1013_SLEEP_DELAY_MS,
+ false);
if (ret)
goto err_iio_unregister;

- pm_runtime_enable(&client->dev);
- pm_runtime_set_autosuspend_delay(&client->dev,
- KXCJK1013_SLEEP_DELAY_MS);
- pm_runtime_use_autosuspend(&client->dev);
-
return 0;

err_iio_unregister:
@@ -1326,10 +1301,7 @@ static int kxcjk1013_remove(struct i2c_client *client)
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct kxcjk1013_data *data = iio_priv(indio_dev);

- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
- pm_runtime_put_noidle(&client->dev);
-
+ iio_pm_runtime_cleanup(&client->dev);
iio_device_unregister(indio_dev);

if (data->dready_trig) {
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/