[PATCH 07/11] irqchip / GICv3: Refactor gic_of_init() for GICv3 driver

From: Hanjun Guo
Date: Mon May 18 2015 - 09:01:17 EST


From: Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>

Isolate hardware abstraction (FDT) code to gic_of_init().
Rest of the logic goes to gic_init_bases() and expects well
defined data to initialize GIC properly. The same solution
is used for GICv2 driver.

This is needed for ACPI initialization later.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>
Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
---
drivers/irqchip/irq-gic-v3.c | 105 +++++++++++++++++++++++++------------------
1 file changed, 61 insertions(+), 44 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 49875ad..87cf81b 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -765,17 +765,69 @@ static const struct irq_domain_ops gic_irq_domain_ops = {
.free = gic_irq_domain_free,
};

+static int __init gic_init_bases(void __iomem *dist_base,
+ struct redist_region *rdist_regs,
+ u32 nr_redist_regions,
+ u64 redist_stride,
+ struct device_node *node)
+{
+ u32 typer;
+ int gic_irqs;
+ int err;
+
+ gic_data.dist_base = dist_base;
+ gic_data.redist_regions = rdist_regs;
+ gic_data.nr_redist_regions = nr_redist_regions;
+ gic_data.redist_stride = redist_stride;
+
+ /*
+ * Find out how many interrupts are supported.
+ * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI)
+ */
+ typer = readl_relaxed(gic_data.dist_base + GICD_TYPER);
+ gic_data.rdists.id_bits = GICD_TYPER_ID_BITS(typer);
+ gic_irqs = GICD_TYPER_IRQS(typer);
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
+ gic_data.irq_nr = gic_irqs;
+
+ gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops,
+ &gic_data);
+ gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist));
+
+ if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
+ err = -ENOMEM;
+ goto out_free;
+ }
+
+ set_handle_irq(gic_handle_irq);
+
+ if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis())
+ its_init(node, &gic_data.rdists, gic_data.domain);
+
+ gic_smp_init();
+ gic_dist_init();
+ gic_cpu_init();
+ gic_cpu_pm_init();
+
+ return 0;
+
+out_free:
+ if (gic_data.domain)
+ irq_domain_remove(gic_data.domain);
+ free_percpu(gic_data.rdists.rdist);
+ return err;
+}
+
+#ifdef CONFIG_OF
static int __init gic_of_init(struct device_node *node, struct device_node *parent)
{
void __iomem *dist_base;
struct redist_region *rdist_regs;
u64 redist_stride;
u32 nr_redist_regions;
- u32 typer;
u32 reg;
- int gic_irqs;
- int err;
- int i;
+ int err, i;

dist_base = of_iomap(node, 0);
if (!dist_base) {
@@ -819,47 +871,11 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
redist_stride = 0;

- gic_data.dist_base = dist_base;
- gic_data.redist_regions = rdist_regs;
- gic_data.nr_redist_regions = nr_redist_regions;
- gic_data.redist_stride = redist_stride;
-
- /*
- * Find out how many interrupts are supported.
- * The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI)
- */
- typer = readl_relaxed(gic_data.dist_base + GICD_TYPER);
- gic_data.rdists.id_bits = GICD_TYPER_ID_BITS(typer);
- gic_irqs = GICD_TYPER_IRQS(typer);
- if (gic_irqs > 1020)
- gic_irqs = 1020;
- gic_data.irq_nr = gic_irqs;
+ err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
+ redist_stride, node);
+ if (!err)
+ return 0;

- gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops,
- &gic_data);
- gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist));
-
- if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
- err = -ENOMEM;
- goto out_free;
- }
-
- set_handle_irq(gic_handle_irq);
-
- if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis())
- its_init(node, &gic_data.rdists, gic_data.domain);
-
- gic_smp_init();
- gic_dist_init();
- gic_cpu_init();
- gic_cpu_pm_init();
-
- return 0;
-
-out_free:
- if (gic_data.domain)
- irq_domain_remove(gic_data.domain);
- free_percpu(gic_data.rdists.rdist);
out_unmap_rdist:
for (i = 0; i < nr_redist_regions; i++)
if (rdist_regs[i].redist_base)
@@ -871,3 +887,4 @@ out_unmap_dist:
}

IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
+#endif
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/