Re: [PATCH v8 2/3] leds: ktd2692: add device tree bindings for ktd2692

From: Jacek Anaszewski
Date: Fri May 08 2015 - 04:33:43 EST


Hi Ingi,

On 05/08/2015 05:03 AM, Ingi Kim wrote:
This patch adds the device tree bindings for ktd2692 flash LEDs.
Add Optional properties of child node for Flash LED

Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx>
Acked-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx>
Reviewed-by: Varka Bhadram <varkabhadram@xxxxxxxxx>
---
.../devicetree/bindings/leds/leds-ktd2692.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 0000000..cf45492
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,50 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+Flash timeout, LVP(low voltage protection).
+
+Also, When the AUX pin is pulled high while CTRL pin is high,
+LED current will be ramped up to the flash-mode current level.
+
+Required properties:
+- compatible: "kinetic,ktd2692"

How about:

compatible : Should be "kinetic,ktd2692".

Pleas put space between the property name and a colon consequently.

+- ctrl-gpio : gpio pin in order control CTRL pin
+- aux-gpio : gpio pin in order control AUX pin

Documentation/devicetree/bindings/gpio/gpio.txt states:

"GPIO properties should be named "[<name>-]gpios".

Please adhere to this. Also please begin description after colon
with a capital letter and put a dot at the end of sentence, e.g.:

ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
aux-gpio : Specifier of the GPIO connected to AUX pin.

+Optional properties:
+- vin-supply : "vin" LED supply (2.7V to 5.5V)
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : Minimum Threshold for Timer protection
+ is defined internally (Maximum 300mA)
+- flash-max-microamp : Flash LED maximum current
+ Formula : I(mA) = 15000 / Rset
+- flash-max-timeout-us : Flash LED maximum timeout
+
+Optional properties for flash LED child nodes:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpio = <&gpc0 1 0>;
+ aux-gpio = <&gpc0 2 0>;

ctrl-gpios = <&gpc0 1 0>;
aux-gpios = <&gpc0 2 0>;

+ vin-supply = <&vbat>;
+
+ flash-led {
+ label = "ktd2692-flash";
+ led-max-microamp = <300000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1835000>;
+ };
+};



--
Best Regards,
Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/