[PATCH] net: macb: Handle the RXUBR interrupt on all devices

[Nathan Sullivan]

The same hardware issue the at91 must work around applies to at least the
Zynq ethernet, and possibly more devices.  The driver also needs to handle
the RXUBR interrupt since it turns it on with MACB_RX_INT_FLAGS anyway.

Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx>
---
 drivers/net/ethernet/cadence/macb.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 4104d49..61aa570 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -981,7 +981,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 	struct macb_queue *queue = dev_id;
 	struct macb *bp = queue->bp;
 	struct net_device *dev = bp->dev;
-	u32 status;
+	u32 status, ctrl;
 
 	status = queue_readl(queue, ISR);
 
@@ -1037,6 +1037,15 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 		 * add that if/when we get our hands on a full-blown MII PHY.
 		 */
 
+		if (status & MACB_BIT(RXUBR)) {
+			ctrl = macb_readl(bp, NCR);
+			macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE));
+			macb_writel(bp, NCR, ctrl | MACB_BIT(RE));
+
+			if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+				macb_writel(bp, ISR, MACB_BIT(RXUBR));
+		}
+
 		if (status & MACB_BIT(ISR_ROVR)) {
 			/* We missed at least one packet */
 			if (macb_is_gem(bp))
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/