Re: [PATCH v3 0/1] ARM: mvebu: dts: Add dts file for DLink DNS-327L

[Andrew]

Andrew Lunn ÐÐÑÐÐ 03.05.2015 23:50:
> Hi Andrew
>
> > DNS-327L is a 2-bay NAS with the following specs:
> >      - 512MiB RAM
> >      - 128MiB NAND Flash
> >      - 1 GbE interface (Marvell PHY)
>
> ...
>
> > /* Set RGMII voltage to 1.8v, according to public docs. Nice! */
> > mw.l 0xd00184e0 0xa8a;
> > /* Some weird magic that goes into phy registers, no public docs */
> > phyWrite 0 16 2;
> > phyWrite 0 19 77;
> > phyWrite 0 18 5747;
>
> Take a look at the marvell,reg-init property. Might do what you need.
>
>      Andrew

Thanks for the tip. So far I'm solving it via u-boot.
You have to set RGMII voltage there anyway if you want tftp for the 
updates,
so it looks like the right place to do this kind of stuff.


I'll add the proper magic to the dts file and resend tomorrow.

--
Regards,
Andrew

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/