Re: [PATCH] mfd: add Intel Broxton Whiskey Cove PMIC driver

From: Lee Jones
Date: Wed Apr 29 2015 - 07:14:38 EST


On Tue, 21 Apr 2015, qipeng.zha wrote:

> From: "qipeng.zha" <qipeng.zha@xxxxxxxxx>
>
> Add MFD core driver for Intel Broxton Whiskey Cove PMIC,
> which is specially accessed by hardware IPC, not a generic
> I2C device
>
> Signed-off-by: qipeng.zha <qipeng.zha@xxxxxxxxx>
> ---
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel_soc_pmic_bxtwc.c | 469 +++++++++++++++++++++++++++++++++++++
> include/linux/mfd/intel_bxtwc.h | 70 ++++++
> include/linux/mfd/intel_soc_pmic.h | 1 +
> 4 files changed, 541 insertions(+)
> create mode 100644 drivers/mfd/intel_soc_pmic_bxtwc.c
> create mode 100644 include/linux/mfd/intel_bxtwc.h
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0e5cfeb..5e771a2 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -183,5 +183,6 @@ obj-$(CONFIG_MFD_RT5033) += rt5033.o
> obj-$(CONFIG_MFD_SKY81452) += sky81452.o
>
> intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
> +intel-soc-pmic-objs += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
> new file mode 100644
> index 0000000..2d80a9b
> --- /dev/null
> +++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
> @@ -0,0 +1,469 @@
> +/*
> + * intel_soc_pmic_bxtwc.c: MFD core driver for Intel Broxton Whiskey Cove PMIC
> + *
> + * Copyright (C) 2014 Intel Corporation. All rights reserved.

This is out of date.

> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/version.h>
> +#include <linux/err.h>
> +#include <linux/delay.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/acpi.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel_bxtwc.h>
> +
> +/* Interrupt Status Registers */
> +#define BXTWC_IRQLVL1 0x4E02
> +#define BXTWC_PWRBTNIRQ 0x4E03
> +
> +#define BXTWC_THRM0IRQ 0x4E04
> +#define BXTWC_THRM1IRQ 0x4E05
> +#define BXTWC_THRM2IRQ 0x4E06
> +#define BXTWC_BCUIRQ 0x4E07
> +#define BXTWC_ADCIRQ 0x4E08
> +#define BXTWC_CHGR0IRQ 0x4E09
> +#define BXTWC_CHGR1IRQ 0x4E0A
> +#define BXTWC_GPIOIRQ0 0x4E0B
> +#define BXTWC_GPIOIRQ1 0x4E0C
> +#define BXTWC_CRITIRQ 0x4E0D
> +
> +/* Interrupt MASK Registers */
> +#define BXTWC_MIRQLVL1 0x4E0E
> +#define BXTWC_MPWRTNIRQ 0x4E0F
> +
> +#define BXTWC_MTHRM0IRQ 0x4E12
> +#define BXTWC_MTHRM1IRQ 0x4E13
> +#define BXTWC_MTHRM2IRQ 0x4E14
> +#define BXTWC_MBCUIRQ 0x4E15
> +#define BXTWC_MADCIRQ 0x4E16
> +#define BXTWC_MCHGR0IRQ 0x4E17
> +#define BXTWC_MCHGR1IRQ 0x4E18
> +#define BXTWC_MGPIO0IRQ 0x4E19
> +#define BXTWC_MGPIO1IRQ 0x4E1A
> +#define BXTWC_MCRITIRQ 0x4E1B
> +
> +/* Manage in two irq chips since mask registers are not consecutive*/
> +enum bxtwc_irqs {
> + /* Level 1 */
> + BXTWC_PWRBTN_LVL1_IRQ = 0,
> + BXTWC_TMU_LVL1_IRQ,
> + BXTWC_THRM_LVL1_IRQ,
> + BXTWC_BCU_LVL1_IRQ,
> + BXTWC_ADC_LVL1_IRQ,
> + BXTWC_CHGR_LVL1_IRQ,
> + BXTWC_GPIO_LVL1_IRQ,
> + BXTWC_CRIT_LVL1_IRQ,
> +
> + /* Level 2 */
> + BXTWC_PWRBTN_IRQ,
> +};
> +
> +enum bxtwc_irqs_level2 {
> + /* Level 2 */
> + BXTWC_THRM0_IRQ = 0,
> + BXTWC_THRM1_IRQ,
> + BXTWC_THRM2_IRQ,
> + BXTWC_BCU_IRQ,
> + BXTWC_ADC_IRQ,
> + BXTWC_CHGR0_IRQ,
> + BXTWC_CHGR1_IRQ,
> + BXTWC_GPIO0_IRQ,
> + BXTWC_GPIO1_IRQ,
> + BXTWC_CRIT_IRQ,
> +};
> +
> +#define INIT_REGMAP_IRQ(_irq, _off, _mask) \
> + [_irq] = { .reg_offset = (_off), .mask = (_mask) }
> +
> +static const struct regmap_irq bxtwc_regmap_irqs[] = {
> + INIT_REGMAP_IRQ(BXTWC_PWRBTN_LVL1_IRQ, 0, BIT(0)),
> + INIT_REGMAP_IRQ(BXTWC_TMU_LVL1_IRQ, 0, BIT(1)),
> + INIT_REGMAP_IRQ(BXTWC_THRM_LVL1_IRQ, 0, BIT(2)),
> + INIT_REGMAP_IRQ(BXTWC_BCU_LVL1_IRQ, 0, BIT(3)),
> + INIT_REGMAP_IRQ(BXTWC_ADC_LVL1_IRQ, 0, BIT(4)),
> + INIT_REGMAP_IRQ(BXTWC_CHGR_LVL1_IRQ, 0, BIT(5)),
> + INIT_REGMAP_IRQ(BXTWC_GPIO_LVL1_IRQ, 0, BIT(6)),
> + INIT_REGMAP_IRQ(BXTWC_CRIT_LVL1_IRQ, 0, BIT(7)),
> + INIT_REGMAP_IRQ(BXTWC_PWRBTN_IRQ, 1, 0x03),
> +};
> +
> +static const struct regmap_irq bxtwc_regmap_irqs_level2[] = {
> + INIT_REGMAP_IRQ(BXTWC_THRM0_IRQ, 0, 0xff),
> + INIT_REGMAP_IRQ(BXTWC_THRM1_IRQ, 1, 0xbf),
> + INIT_REGMAP_IRQ(BXTWC_THRM2_IRQ, 2, 0xff),
> + INIT_REGMAP_IRQ(BXTWC_BCU_IRQ, 3, 0x1f),
> + INIT_REGMAP_IRQ(BXTWC_ADC_IRQ, 4, 0xff),
> + INIT_REGMAP_IRQ(BXTWC_CHGR0_IRQ, 5, 0x1f),
> + INIT_REGMAP_IRQ(BXTWC_CHGR1_IRQ, 6, 0x1f),
> + INIT_REGMAP_IRQ(BXTWC_GPIO0_IRQ, 7, 0xff),
> + INIT_REGMAP_IRQ(BXTWC_GPIO1_IRQ, 8, 0x3f),
> + INIT_REGMAP_IRQ(BXTWC_CRIT_IRQ, 9, 0x03),
> +};
> +
> +static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
> + .name = "bxtwc_irq_chip",
> + .status_base = BXTWC_IRQLVL1,
> + .mask_base = BXTWC_MIRQLVL1,
> + .irqs = bxtwc_regmap_irqs,
> + .num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs),
> + .num_regs = 2,
> +};
> +
> +static struct regmap_irq_chip bxtwc_regmap_irq_chip_level2 = {
> + .name = "bxtwc_irq_chip_level2",
> + .status_base = BXTWC_THRM0IRQ,
> + .mask_base = BXTWC_MTHRM0IRQ,
> + .irqs = bxtwc_regmap_irqs_level2,
> + .num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_level2),
> + .num_regs = 10,
> +};
> +
> +static const struct regmap_config bxtwc_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> +};
> +
> +static struct resource gpio_resources[] = {
> + {
> + .name = "GPIO0",
> + .start = BXTWC_GPIO0_IRQ,
> + .end = BXTWC_GPIO0_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .name = "GPIO1",
> + .start = BXTWC_GPIO1_IRQ,
> + .end = BXTWC_GPIO1_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct resource adc_resources[] = {
> + {
> + .name = "ADC",
> + .start = BXTWC_ADC_IRQ,
> + .end = BXTWC_ADC_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct resource charger_resources[] = {
> + {
> + .name = "CHARGER",
> + .start = BXTWC_CHGR0_IRQ,
> + .end = BXTWC_CHGR0_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .name = "CHARGER1",
> + .start = BXTWC_CHGR1_IRQ,
> + .end = BXTWC_CHGR1_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct resource thermal_resources[] = {
> + {
> + .start = BXTWC_THRM0_IRQ,
> + .end = BXTWC_THRM0_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .start = BXTWC_THRM1_IRQ,
> + .end = BXTWC_THRM1_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .start = BXTWC_THRM2_IRQ,
> + .end = BXTWC_THRM2_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct resource bcu_resources[] = {
> + {
> + .name = "BCU",
> + .start = BXTWC_BCU_IRQ,
> + .end = BXTWC_BCU_IRQ,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct mfd_cell bxt_wc_dev[] = {
> + {
> + .name = "bxt_wcove_gpadc",
> + .id = 0,

Why are you populating these?

> + .num_resources = ARRAY_SIZE(adc_resources),
> + .resources = adc_resources,
> + },
> + {
> + .name = "bxt_wcove_thermal",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(thermal_resources),
> + .resources = thermal_resources,
> + },
> + {
> + .name = "bxt_wcove_ext_charger",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(charger_resources),
> + .resources = charger_resources,
> + },
> + {
> + .name = "bxt_wcove_bcu",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(bcu_resources),
> + .resources = bcu_resources,
> + },
> + {
> + .name = "bxt_wcove_gpio",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(gpio_resources),
> + .resources = gpio_resources,
> + },
> + {
> + .name = "bxt_wcove_sw_fuel_gauge",
> + .id = 0,
> + .num_resources = 0,
> + .resources = NULL,
> + },
> + {
> + .name = "bxt_wcove_sw_fuel_gauge_ha",
> + .id = 0,
> + .num_resources = 0,
> + .resources = NULL,
> + },
> + {
> + .name = "bxt_wcove_region",
> + },
> +};

I'm a bit worried about what you're trying to achieve from here ...

> +static unsigned long bxtwc_reg_addr;
> +static ssize_t bxtwc_reg_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "0x%lx\n", bxtwc_reg_addr);
> +}
> +
> +static ssize_t bxtwc_reg_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + if (kstrtoul(buf, 0, &bxtwc_reg_addr)) {
> + dev_err(dev, "Invalid register addr\n");
> + return -EINVAL;
> + }
> + return count;
> +}
> +
> +static ssize_t bxtwc_val_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int ret;
> + unsigned int val;
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + ret = regmap_read(pmic->regmap, bxtwc_reg_addr, &val);
> + if (ret < 0) {
> + dev_err(dev, "Fail to read 0x%lx\n", bxtwc_reg_addr);
> + return -EIO;
> + }
> +
> + return sprintf(buf, "0x%02x\n", val);
> +}
> +
> +static ssize_t bxtwc_val_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + int ret;
> + unsigned int val;
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + if (kstrtoul(buf, 0, (unsigned long *)&val)) {
> + dev_err(dev, "Invalid value\n");
> + return -EINVAL;
> + }
> +
> + ret = regmap_write(pmic->regmap, bxtwc_reg_addr, val);
> + if (ret) {
> + dev_err(dev, "Write err: 0x%lx=0x%02x\n", bxtwc_reg_addr, val);
> + return -EIO;
> + }
> + return count;
> +}

... to here.

Can you provide me with an explanation?

It's looks like you're trying to read/write to registers from /sysfs,
which frightens me a lot.

> +static DEVICE_ATTR(addr, S_IWUSR | S_IRUSR, bxtwc_reg_show, bxtwc_reg_store);
> +static DEVICE_ATTR(val, S_IWUSR | S_IRUSR, bxtwc_val_show, bxtwc_val_store);
> +static struct attribute *bxtwc_attrs[] = {
> + &dev_attr_addr.attr,
> + &dev_attr_val.attr,
> + NULL
> +};
> +
> +static const struct attribute_group bxtwc_group = {
> + .attrs = bxtwc_attrs,
> +};
> +
> +/* Whiskey Cove PMIC share same ACPI ID between different platforms */
> +#define BROXTON_PMIC_WC_HRV 4

Put this at the top. Also, if it's an ACPI ID, it should say so.

> +static int bxtwc_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct resource *res;
> + struct intel_soc_pmic *pmic;
> + acpi_status status;
> + unsigned long long hrv;
> + acpi_handle handle = ACPI_HANDLE(&pdev->dev);
> +
> + status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
> + if (ACPI_FAILURE(status)) {
> + dev_err(&pdev->dev, "ACPI error when get _HRV\n");
> + return -ENODEV;
> + }
> + if (hrv != BROXTON_PMIC_WC_HRV) {
> + dev_err(&pdev->dev, "Wrong _HRV %llu\n", hrv);
> + return -ENODEV;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);

platform_get_irq()?

> + if (!res) {
> + dev_err(&pdev->dev, "No irq resource?\n");
> + return -ENOENT;
> + }
> +
> + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
> + if (!pmic)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&pdev->dev, pmic);
> + pmic->irq = res->start;
> + pmic->dev = &pdev->dev;
> + pmic->default_i2c_addr = BXTWC_DEVICE1_ADDR;

What's the point in storing a defined constant to a variable?

Just use the constant in it's place.

> + pmic->regmap = devm_regmap_init_pmic_ipc(pmic, &bxtwc_regmap_config);
> + if (IS_ERR(pmic->regmap)) {
> + ret = PTR_ERR(pmic->regmap);
> + dev_err(&pdev->dev, "Fail to init pmic ipc regmap: %d\n", ret);
> + return ret;
> + }
> +
> + ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
> + IRQF_ONESHOT | IRQF_SHARED,
> + 0, &bxtwc_regmap_irq_chip,
> + &pmic->irq_chip_data);
> + if (ret) {
> + dev_err(&pdev->dev, "Fail to add irq chip\n");
> + goto err_irq_chip;
> + }
> +
> + ret = regmap_add_irq_chip(pmic->regmap, pmic->irq,
> + IRQF_ONESHOT | IRQF_SHARED,
> + 0, &bxtwc_regmap_irq_chip_level2,
> + &pmic->irq_chip_data_level2);
> + if (ret) {
> + dev_err(&pdev->dev, "Fail to add irq chip level2\n");
> + goto err_irq_chip_level2;
> + }
> +
> + ret = mfd_add_devices(&pdev->dev, -1, bxt_wc_dev,
> + ARRAY_SIZE(bxt_wc_dev), NULL, 0,
> + NULL);
> + if (ret) {
> + dev_err(&pdev->dev, "Fail to addr irq chip level2\n");
> + goto err_mfd;
> + }
> +
> + ret = sysfs_create_group(&pdev->dev.kobj, &bxtwc_group);
> + if (ret) {
> + dev_err(&pdev->dev, "Fail to create sysfs group %d\n", ret);
> + goto err_sysfs;
> + }
> +
> + return 0;
> +
> +err_sysfs:
> + mfd_remove_devices(&pdev->dev);
> +err_mfd:
> + regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_level2);
> +err_irq_chip_level2:
> + regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
> +err_irq_chip:
> + regmap_exit(pmic->regmap);
> +
> + return ret;
> +}
> +
> +static int bxtwc_remove(struct platform_device *pdev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(&pdev->dev);
> +
> + sysfs_remove_group(&pdev->dev.kobj, &bxtwc_group);
> + mfd_remove_devices(&pdev->dev);
> + regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
> + regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data_level2);
> + regmap_exit(pmic->regmap);
> + return 0;
> +}
> +
> +static void bxtwc_shutdown(struct platform_device *pdev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(&pdev->dev);
> +
> + disable_irq(pmic->irq);
> +}
> +
> +#if defined(CONFIG_PM_SLEEP)

Use #ifdef CONFIG_PM_SLEEP

> +static int bxtwc_suspend(struct device *dev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + disable_irq(pmic->irq);
> + return 0;
> +}
> +
> +static int bxtwc_resume(struct device *dev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
> +
> + enable_irq(pmic->irq);
> + return 0;
> +}
> +#endif
> +static SIMPLE_DEV_PM_OPS(bxtwc_pm_ops, bxtwc_suspend, bxtwc_resume);
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id bxtwc_acpi_ids[] = {
> + { "INT34D3", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, pmic_acpi_ids);
> +#endif
> +
> +static struct platform_driver bxtwc_driver = {
> + .probe = bxtwc_probe,
> + .remove = bxtwc_remove,
> + .shutdown = bxtwc_shutdown,
> + .driver = {
> + .name = "bxtwc",
> + .pm = &bxtwc_pm_ops,
> +#ifdef CONFIG_ACPI
> + .acpi_match_table = ACPI_PTR(bxtwc_acpi_ids),
> +#endif

This is belt and braces. The point of using ACPI_PTR() is so you
don't have to encase it in CONFIG_ACPI.

> + },
> +};
> +
> +module_platform_driver(bxtwc_driver);
> +
> +MODULE_LICENSE("GPL");

v2

> +MODULE_AUTHOR("qipeng.zha@xxxxxxxxx");

"First Last <Email>"

> diff --git a/include/linux/mfd/intel_bxtwc.h b/include/linux/mfd/intel_bxtwc.h
> new file mode 100644
> index 0000000..0a2f2a3
> --- /dev/null
> +++ b/include/linux/mfd/intel_bxtwc.h
> @@ -0,0 +1,70 @@
> +/*
> + * intel_bxtwc.h - Header file for Intel Broxton Whiskey Cove PMIC
> + *
> + * Copyright (C) 2014 Intel Corporation. All rights reserved.

This is out of date.

> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *

Remove this line.

> + */
> +
> +#include <linux/mfd/intel_soc_pmic.h>
> +
> +#ifndef __INTEL_BXTWC_H__
> +#define __INTEL_BXTWC_H__
> +
> +/* BXT WC devices */
> +#define BXTWC_DEVICE1_ADDR 0x4E
> +#define BXTWC_DEVICE2_ADDR 0x4F
> +#define BXTWC_DEVICE3_ADDR 0x5E
> +
> +/* device1 Registers */
> +#define BXTWC_CHIPID 0x4E00
> +#define BXTWC_CHIPVER 0x4E01
> +
> +#define BXTWC_SCHGRIRQ0_ADDR 0x5E1A
> +#define BXTWC_CHGRCTRL0_ADDR 0x5E16
> +#define BXTWC_CHGRCTRL1_ADDR 0x5E17
> +#define BXTWC_CHGRCTRL2_ADDR 0x5E18
> +#define BXTWC_CHGRSTATUS_ADDR 0x5E19
> +#define BXTWC_THRMBATZONE_ADDR 0x4F22
> +
> +#define BXTWC_USBPATH_ADDR 0x5E19
> +#define BXTWC_USBPHYCTRL_ADDR 0x5E07
> +#define BXTWC_USBIDCTRL_ADDR 0x5E05
> +#define BXTWC_USBIDEN_MASK 0x01
> +#define BXTWC_USBIDSTAT_ADDR 0x00FF
> +#define BXTWC_USBSRCDETSTATUS_ADDR 0x5E29
> +
> +#define BXTWC_DBGUSBBC1_ADDR 0x5FE0
> +#define BXTWC_DBGUSBBC2_ADDR 0x5FE1
> +#define BXTWC_DBGUSBBCSTAT_ADDR 0x5FE2
> +
> +#define BXTWC_WAKESRC_ADDR 0x4E22
> +#define BXTWC_WAKESRC2_ADDR 0x4EE5
> +#define BXTWC_CHRTTADDR_ADDR 0x5E22
> +#define BXTWC_CHRTTDATA_ADDR 0x5E23
> +
> +#define BXTWC_STHRMIRQ0_ADDR 0x4F19
> +#define WC_MTHRMIRQ1_ADDR 0x4E12
> +#define WC_STHRMIRQ1_ADDR 0x4F1A
> +#define WC_STHRMIRQ2_ADDR 0x4F1B
> +
> +#define BXTWC_THRMZN0H_ADDR 0x4F44
> +#define BXTWC_THRMZN0L_ADDR 0x4F45
> +#define BXTWC_THRMZN1H_ADDR 0x4F46
> +#define BXTWC_THRMZN1L_ADDR 0x4F47
> +#define BXTWC_THRMZN2H_ADDR 0x4F48
> +#define BXTWC_THRMZN2L_ADDR 0x4F49
> +#define BXTWC_THRMZN3H_ADDR 0x4F4A
> +#define BXTWC_THRMZN3L_ADDR 0x4F4B
> +#define BXTWC_THRMZN4H_ADDR 0x4F4C
> +#define BXTWC_THRMZN4L_ADDR 0x4F4D
> +
> +#endif
> diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
> index 74ee3d2..35e7904 100644
> --- a/include/linux/mfd/intel_soc_pmic.h
> +++ b/include/linux/mfd/intel_soc_pmic.h
> @@ -25,6 +25,7 @@ struct intel_soc_pmic {
> int irq;
> struct regmap *regmap;
> struct regmap_irq_chip_data *irq_chip_data;
> + struct regmap_irq_chip_data *irq_chip_data_level2;
> struct device *dev;
> int default_i2c_addr;
> };

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/