Re: [PATCH v6 0/3] ARM: mediatek: Add driver for Mediatek I2C

From: Jean Delvare
Date: Tue Apr 28 2015 - 06:08:26 EST


Hi Lee, Eddie,

Le Tuesday 28 April 2015 Ã 11:02 +0100, Lee Jones a Ãcrit :
> On Tue, 28 Apr 2015, Eddie Huang wrote:
>
> > This series is for Mediatek SoCs I2C controller common bus driver.
> >
> > Earlier MTK SoC ((for example, MT6589, MT8135)) I2C HW has some limitationes.
> > New generation SoC like MT8173 fix following limitations:
> >
> > 1. Only support one i2c_msg number. One exception is WRRD (write then read)
> > mode. WRRD can have two i2c_msg numbers.
> >
> > 2. Mediatek I2C controller support WRRD(write then read) mode, in WRRD
> > mode the Repeat Start will be issued between 2 messages.
> > In this driver if 2 messages is first write then read, the driver will
> > combine 2 messages using Write-Read mode so the RS will be issued between
> > the 2 messages.
> >
> > 3. The max transfer data length is 255 in one message. In WRRD mode, the
> > max data length of second msg is 31.
> >
> > MT8135 and MT6589 can control I2C pins on PMIC(MT6397) by setting the i2c
> > registers in MT8135 side. In this case, driver should set OFFSET_PATH_DIR
> > bit first, the operation on other registers are still the same.
> > For now MT6589/MT8135 support this, MT6577/MT6595/MT8127 do not support.
> > For example, If want to use I2C4/5/6 pins on MT8135 just need to enable
> > the pinmux, else if want to use I2C pins on PMIC(MT6397) need to add
> > "mediatek,have-pmic" property in the .dts file of each platform.
> >
> > This driver is based on 4.1-rc1.
> >
> > Change in v6:
> > 1. Update binding document not use default clock-frequency as example.
> > 2. Add mtk_i2c_compatible struct and pass hardware capabilities
> > through of_device_id
> > 3. Remove some hardware setting in mtk_i2c_do_transfer to mtk_i2c_init_hw
> > so just init one time.
> > 4. Correct mtk_i2c_parse_dt don't set default clock bug.
> >
> > Change in v5:
> > Apply new i2c_adapter_quirks patch [2]. Change to use dam_map_single to map
> > dma buffer. Add spinlock to fix race condition. Check of_property_read_u32
> > return value. Remove I2C_FUNC_10BIT_ADDR capability due to driver not implement.
> > Add MT8173 I2C driver.
> >
> > Change in v4:
> > Modify to support i2c_adapter_quirks base on Wolfram's patch [1].
> > Remove check transfer size and WRRD combine code. Instead, fill quirk
> > property and let i2c_check_for_quirks to do the filter.
> >
> > [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314804.html
> > [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-February/325744.html
> >
> > Eddie Huang (1):
> > I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
> >
> > Xudong Chen (2):
> > dt-bindings: Add I2C bindings for mt65xx/mt81xx.
> > I2C: mediatek: Add driver for MediaTek I2C controller
> >
> > .../devicetree/bindings/i2c/i2c-mt6577.txt | 41 ++
> > drivers/i2c/busses/Kconfig | 9 +
> > drivers/i2c/busses/Makefile | 1 +
> > drivers/i2c/busses/i2c-mt65xx.c | 748 +++++++++++++++++++++
> > 4 files changed, 799 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> > create mode 100644 drivers/i2c/busses/i2c-mt65xx.c
>
> Why have you sent me this?

Mind you, I was wondering exactly the same ;-)


--
Jean Delvare
SUSE L3 Support

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/