Re: [PATCH kernel v9 16/32] powerpc/powernv/ioda: Move TCE kill register address to PE

From: Alex Williamson
Date: Mon Apr 27 2015 - 17:05:45 EST


On Sat, 2015-04-25 at 22:14 +1000, Alexey Kardashevskiy wrote:
> At the moment the DMA setup code looks for the "ibm,opal-tce-kill" property
> which contains the TCE kill register address. Writes to this register
> invalidates TCE cache on IODA/IODA2 hub.
>
> This moves the register address from iommu_table to pnv_ioda_pe as
> later there will be 2 tables per PE and it will be used for both tables.
>
> This moves the property reading/remapping code to a helper to reduce
> code duplication.
>
> This adds a new pnv_pci_ioda2_tvt_invalidate() helper which invalidates
> the entire table. It should be called after every call to
> opal_pci_map_pe_dma_window(). It was not required before because
> there is just a single TCE table and 64bit DMA is handled via bypass
> window (which has no table so no chache is used) but this is going
> to change with Dynamic DMA windows (DDW).
>
> Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
> ---
> Changes:
> v9:
> * new in the series
> ---
> arch/powerpc/platforms/powernv/pci-ioda.c | 69 +++++++++++++++++++------------
> arch/powerpc/platforms/powernv/pci.h | 1 +
> 2 files changed, 44 insertions(+), 26 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index f070c44..b22b3ca 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1672,7 +1672,7 @@ static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
> struct pnv_ioda_pe, table_group);
> __be64 __iomem *invalidate = rm ?
> (__be64 __iomem *)pe->tce_inval_reg_phys :
> - (__be64 __iomem *)tbl->it_index;
> + pe->tce_inval_reg;
> unsigned long start, end, inc;
> const unsigned shift = tbl->it_page_shift;
>
> @@ -1743,6 +1743,18 @@ static struct iommu_table_ops pnv_ioda1_iommu_ops = {
> .get = pnv_tce_get,
> };
>
> +static inline void pnv_pci_ioda2_tvt_invalidate(struct pnv_ioda_pe *pe)
> +{
> + /* 01xb - invalidate TCEs that match the specified PE# */
> + unsigned long addr = (0x4ull << 60) | (pe->pe_number & 0xFF);
> +
> + if (!pe->tce_inval_reg)
> + return;
> +
> + mb(); /* Ensure above stores are visible */


ERROR: code indent should use tabs where possible


> + __raw_writeq(cpu_to_be64(addr), pe->tce_inval_reg);
> +}
> +
> static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
> unsigned long index, unsigned long npages, bool rm)
> {
> @@ -1751,7 +1763,7 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
> unsigned long start, end, inc;
> __be64 __iomem *invalidate = rm ?
> (__be64 __iomem *)pe->tce_inval_reg_phys :
> - (__be64 __iomem *)tbl->it_index;
> + pe->tce_inval_reg;
> const unsigned shift = tbl->it_page_shift;
>
> /* We'll invalidate DMA address in PE scope */
> @@ -1803,13 +1815,31 @@ static struct iommu_table_ops pnv_ioda2_iommu_ops = {
> .get = pnv_tce_get,
> };
>
> +static void pnv_pci_ioda_setup_opal_tce_kill(struct pnv_phb *phb,
> + struct pnv_ioda_pe *pe)
> +{
> + const __be64 *swinvp;
> +
> + /* OPAL variant of PHB3 invalidated TCEs */
> + swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
> + if (!swinvp)
> + return;
> +
> + /* We need a couple more fields -- an address and a data
> + * to or. Since the bus is only printed out on table free
> + * errors, and on the first pass the data will be a relative
> + * bus number, print that out instead.
> + */
> + pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
> + pe->tce_inval_reg = ioremap(pe->tce_inval_reg_phys, 8);
> +}
> +
> static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> struct pnv_ioda_pe *pe, unsigned int base,
> unsigned int segs)
> {
>
> struct page *tce_mem = NULL;
> - const __be64 *swinvp;
> struct iommu_table *tbl;
> unsigned int i;
> int64_t rc;
> @@ -1823,6 +1853,8 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> if (WARN_ON(pe->tce32_seg >= 0))
> return;
>
> + pnv_pci_ioda_setup_opal_tce_kill(phb, pe);
> +
> /* Grab a 32-bit TCE table */
> pe->tce32_seg = base;
> pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
> @@ -1865,20 +1897,11 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> base << 28, IOMMU_PAGE_SHIFT_4K);
>
> /* OPAL variant of P7IOC SW invalidated TCEs */
> - swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
> - if (swinvp) {
> - /* We need a couple more fields -- an address and a data
> - * to or. Since the bus is only printed out on table free
> - * errors, and on the first pass the data will be a relative
> - * bus number, print that out instead.
> - */
> - pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
> - tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
> - 8);
> + if (pe->tce_inval_reg)
> tbl->it_type |= (TCE_PCI_SWINV_CREATE |
> TCE_PCI_SWINV_FREE |
> TCE_PCI_SWINV_PAIR);
> - }
> +
> tbl->it_ops = &pnv_ioda1_iommu_ops;
> iommu_init_table(tbl, phb->hose->node);
>
> @@ -1984,7 +2007,6 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> {
> struct page *tce_mem = NULL;
> void *addr;
> - const __be64 *swinvp;
> struct iommu_table *tbl;
> unsigned int tce_table_size, end;
> int64_t rc;
> @@ -1993,6 +2015,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> if (WARN_ON(pe->tce32_seg >= 0))
> return;
>
> + pnv_pci_ioda_setup_opal_tce_kill(phb, pe);
> +
> /* The PE will reserve all possible 32-bits space */
> pe->tce32_seg = 0;
> end = (1 << ilog2(phb->ioda.m32_pci_base));
> @@ -2023,6 +2047,8 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> goto fail;
> }
>
> + pnv_pci_ioda2_tvt_invalidate(pe);
> +
> /* Setup iommu */
> pe->table_group.tables[0].it_table_group = &pe->table_group;
>
> @@ -2032,18 +2058,9 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
> IOMMU_PAGE_SHIFT_4K);
>
> /* OPAL variant of PHB3 invalidated TCEs */
> - swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
> - if (swinvp) {
> - /* We need a couple more fields -- an address and a data
> - * to or. Since the bus is only printed out on table free
> - * errors, and on the first pass the data will be a relative
> - * bus number, print that out instead.
> - */
> - pe->tce_inval_reg_phys = be64_to_cpup(swinvp);
> - tbl->it_index = (unsigned long)ioremap(pe->tce_inval_reg_phys,
> - 8);
> + if (pe->tce_inval_reg)
> tbl->it_type |= (TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE);
> - }
> +
> tbl->it_ops = &pnv_ioda2_iommu_ops;
> iommu_init_table(tbl, phb->hose->node);
> #ifdef CONFIG_IOMMU_API
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 368d4ed..bd83d85 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -59,6 +59,7 @@ struct pnv_ioda_pe {
> int tce32_segcount;
> struct iommu_table_group table_group;
> phys_addr_t tce_inval_reg_phys;
> + __be64 __iomem *tce_inval_reg;
>
> /* 64-bit TCE bypass region */
> bool tce_bypass_enabled;



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/