Re: [PATCH 0/8] cpufreq: add generic cpufreq driver support for Exynos5250/5800 platforms

From: Bartlomiej Zolnierkiewicz
Date: Tue Apr 21 2015 - 12:04:23 EST


On Tuesday, April 21, 2015 03:17:50 PM Bartlomiej Zolnierkiewicz wrote:
> Hi,
>
> This patch series adds generic arm_big_little_dt cpufreq driver
> support for Exynos5420/5800 (using the new CPU clock type which
> allows it). It also:
> - enhances arm_big_little[_dt] driver with CPU cluster regulator
> support
> - fixes CPU clock configuration data and CPU operating points
> setup for Exynos5800
> - adds CPU cluster regulator supplies for ODROID-XU3 board
>
> This patch series has been tested on Exynos5800 based ODROID-XU3
> board.
>
> Depends on:
> - next-20150330 branch of linux-next kernel tree
> - "[PATCH 0/6] cpufreq: use generic cpufreq drivers for Exynos4210
> platform" [1]
> - "[PATCH 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12
> platform" [2]
> - "[PATCH] cpufreq: exynos: remove dead ->need_apll_change method" [3]
> - "[PATCH 0/4] cpufreq: use generic cpufreq drivers for Exynos5250
> platform" [4]
>
> [1] http://www.kernelhub.org/?msg=721136&p=2
> [2] http://marc.info/?l=linux-pm&m=142868881101873&w=2
> [3] https://lkml.org/lkml/2015/3/27/574
> [4] https://lkml.org/lkml/2015/4/13/611
>
> Changes over Thomas' original v12 code:
> - split Exynos5420 and Exynos5800 support
> - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c
> - disabled cpufreq if big.LITTLE switcher support is enabled
> - enhanced arm_big_little[_dt] driver with CPU cluster regulator
> support
> - fixed CPU clock configuration data for Exynos5800
> - fixed CPU operating points setup for Exynos5800
> - added CPU cluster regulator supplies for ODROID-XU3 board
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (4):
> cpufreq: arm_big_little: add cluster regulator support
> ARM: dts: add cluster regulator supply properties for
> exynos5422-odroidxu3
> clk: samsung: exynos5800: fix cpu clock configuration data
> ARM: dts: Exynos5800: fix CPU OPP
>
> Thomas Abraham (4):
> clk: samsung: exynos5420: add cpu clock configuration data and
> instantiate cpu clock
> ARM: dts: Exynos5420: add CPU OPP and regulator supply property
> ARM: Exynos: use generic cpufreq driver for Exynos5420
> ARM: Exynos: use generic cpufreq driver for Exynos5800
>
> .../bindings/cpufreq/arm_big_little_dt.txt | 4 +
> arch/arm/boot/dts/exynos5420.dtsi | 38 +++++
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 +
> arch/arm/boot/dts/exynos5800.dtsi | 39 +++++
> arch/arm/mach-exynos/exynos.c | 8 +
> drivers/clk/samsung/clk-exynos5420.c | 88 ++++++++++-
> drivers/cpufreq/arm_big_little.c | 153 +++++++++++++++++---
> include/dt-bindings/clock/exynos5420.h | 2 +
> 8 files changed, 320 insertions(+), 20 deletions(-)

If you are using exynos5420-arndale-octa.dts, exynos5420-peach-pit.dts,
exynos5420-smdk5420.dts or exynos5800-peach-pi.dts please use the attached
patch instead of patch #2/8. Sorry for the inconvenience.

From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Subject: [PATCH v2 2/8] ARM: dts: Exynos5420/5800: add cluster regulator supply properties

Add cluster regulator supply properties as a preparation to
adding generic arm_big_little_dt cpufreq driver support for
Exynos5420 and Exynos5800 based boards.

Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
Cc: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Cc: Andreas Faerber <afaerber@xxxxxxx>
Cc: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 8 ++++++++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 ++++++++
arch/arm/boot/dts/exynos5420-smdk5420.dts | 8 ++++++++
arch/arm/boot/dts/exynos5422-odroidxu3.dts | 8 ++++++++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 ++++++++
5 files changed, 40 insertions(+)

Index: b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts 2015-04-21 16:26:53.022509881 +0200
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts 2015-04-21 17:25:30.250396715 +0200
@@ -369,6 +369,14 @@
};
};

+&cpu0 {
+ cpu-cluster.0-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-cluster.1-supply = <&buck6_reg>;
+};
+
&usbdrd_dwc3_1 {
dr_mode = "host";
};
Index: b/arch/arm/boot/dts/exynos5420-peach-pit.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts 2015-04-21 16:26:53.022509881 +0200
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts 2015-04-21 17:26:32.034394727 +0200
@@ -676,6 +676,14 @@
};
};

+&cpu0 {
+ cpu-cluster.0-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-cluster.1-supply = <&buck6_reg>;
+};
+
&i2c_2 {
status = "okay";
samsung,i2c-sda-delay = <100>;
Index: b/arch/arm/boot/dts/exynos5420-smdk5420.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts 2015-04-21 16:26:53.022509881 +0200
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts 2015-04-21 17:27:04.338393689 +0200
@@ -420,3 +420,11 @@
};
};
};
+
+&cpu0 {
+ cpu-cluster.0-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-cluster.1-supply = <&buck6_reg>;
+};
Index: b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts 2015-04-21 17:23:44.334400124 +0200
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts 2015-04-21 17:24:05.454399445 +0200
@@ -355,6 +355,14 @@
dr_mode = "otg";
};

+&cpu0 {
+ cpu-cluster.0-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-cluster.1-supply = <&buck6_reg>;
+};
+
&i2c_0 {
status = "okay";

Index: b/arch/arm/boot/dts/exynos5800-peach-pi.dts
===================================================================
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts 2015-04-21 16:26:53.030509881 +0200
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts 2015-04-21 17:27:47.674392295 +0200
@@ -638,6 +638,14 @@
};
};

+&cpu0 {
+ cpu-cluster.0-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+ cpu-cluster.1-supply = <&buck6_reg>;
+};
+
&i2c_2 {
status = "okay";
samsung,i2c-sda-delay = <100>;




--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/