RE: [PATCH 2/9][v2]usb:fsl:otg: Add support to add/remove usb host driver

From: Ramneek Mehresh
Date: Mon Apr 20 2015 - 12:35:32 EST




> -----Original Message-----
> From: Alan Stern [mailto:stern@xxxxxxxxxxxxxxxxxxx]
> Sent: Tuesday, April 07, 2015 9:23 PM
> To: Mehresh Ramneek-B31383
> Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; balbi@xxxxxx;
> gregkh@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 2/9][v2]usb:fsl:otg: Add support to add/remove usb
> host driver
>
> On Tue, 7 Apr 2015, Ramneek Mehresh wrote:
>
> > Add workqueue to add/remove host driver (outside interrupt context)
> > upon each id change
>
> This patch needs to be fixed. See below.
>
Thanks Alan. I'll correct the patch.

> > Signed-off-by: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
> > ---
> > drivers/usb/host/ehci-fsl.c | 107
> ++++++++++++++++++++++++++++++++++++--------
> > drivers/usb/host/ehci.h | 1 -
> > 2 files changed, 88 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> > index ab4eee3..9c91fbe 100644
> > --- a/drivers/usb/host/ehci-fsl.c
> > +++ b/drivers/usb/host/ehci-fsl.c
> > @@ -33,6 +33,58 @@
> >
> > #include "ehci-fsl.h"
> >
> > +struct ehci_fsl {
> > + struct ehci_hcd ehci;
> > +
> > +#ifdef CONFIG_PM
> > + /* Saved USB PHY settings, need to restore after deep sleep. */
> > + u32 usb_ctrl;
> > +#if defined(CONFIG_FSL_USB2_OTG) ||
> defined(CONFIG_FSL_USB2_OTG_MODULE)
> > + struct work_struct change_hcd_work;
> > +#endif
> > +#endif
> > +
> > + /* store current hcd state for otg;
> > + * have_hcd is true when host drv al already part of otg framework,
> > + * otherwise false;
> > + * hcd_add is true when otg framework wants to add host
> > + * drv as part of otg;flase when it wants to remove it
> > + */
> > + unsigned have_hcd:1;
> > + unsigned hcd_add:1;
> > +};
>
> This is the wrong way to connect platform-private data with the ehci_hcd
> structure. The right way is to use an ehci_driver_overrides structure, like in
> ehci-omap.c and quite a few other EHCI platform drivers.
>
Will correct
> > +#if defined(CONFIG_FSL_USB2_OTG) ||
> > +defined(CONFIG_FSL_USB2_OTG_MODULE)
> > +static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) {
> > + struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> > +
> > + return container_of(ehci, struct ehci_fsl, ehci); }
>
> This is bound to fail no matter what, because the ehci_hcd structure is
> already embedded in the usb_hcd structure. It can't be embedded in an
> ehci_fsl structure too.
>
> (Of course, this won't matter when you switch to the approved way of
> connecting private data.)
>
Will correct
> > +static void do_change_hcd(struct work_struct *work) {
> > + struct ehci_fsl *ehci_fsl = container_of(work, struct ehci_fsl,
> > + change_hcd_work);
> > + struct ehci_hcd *ehci = &ehci_fsl->ehci;
> > + struct usb_hcd *hcd = ehci_to_hcd(ehci);
> > +
> > + void __iomem *non_ehci = hcd->regs;
> > + int retval;
> > +
> > + if (ehci_fsl->hcd_add && !ehci_fsl->have_hcd) {
> > + writel(USBMODE_CM_HOST, non_ehci +
> FSL_SOC_USB_USBMODE);
> > + /* host, gadget and otg share same int line */
> > + retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
> > + if (retval == 0)
> > + ehci_fsl->have_hcd = 1;
> > + } else if (!ehci_fsl->hcd_add && ehci_fsl->have_hcd) {
> > + usb_remove_hcd(hcd);
> > + ehci_fsl->have_hcd = 0;
> > + }
> > +}
>
> Does this really work right? What about things like
> device_wakeup_enable()? Don't you need to disable the controller when
> leaving host mode and enable it when entering host mode?
>
Yes, this does work, it's tested. Yes, controller needs to be disabled when switching the mode from
Host to gadget and vice-versa. Only one driver can have control of the hardware at a time. that's why call
to usb_remove_hcd() is made. Gadget driver configures the controller in gadget mode, and takes control of
the hardware
> Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/