Re: [PATCH V1 4/6] input: misc: onkey: da9062: DA9062 OnKey driver

From: Dmitry Torokhov
Date: Fri Apr 17 2015 - 12:12:38 EST


Hi,

On Fri, Apr 17, 2015 at 03:23:33PM +0100, S Twiss wrote:
> From: S Twiss <stwiss.opensource@xxxxxxxxxxx>
>
> Add OnKey driver support for DA9062
>
> Signed-off-by: Steve Twiss <stwiss.opensource@xxxxxxxxxxx>
>
> ---
>
> This patch applies against linux-next and v4.0
>
>
>
> drivers/input/misc/Kconfig | 10 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/da9062-onkey.c | 223 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 234 insertions(+)
> create mode 100644 drivers/input/misc/da9062-onkey.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 6deb8da..472ca38 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -586,6 +586,16 @@ config INPUT_DA9055_ONKEY
> To compile this driver as a module, choose M here: the module
> will be called da9055_onkey.
>
> +config INPUT_DA9062_ONKEY
> + tristate "Dialog DA9062 OnKey"
> + depends on MFD_DA9062
> + help
> + Support the ONKEY of Dialog DA9062 Power Management IC as an
> + input device reporting power button status.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called da9062-onkey.
> +
> config INPUT_DM355EVM
> tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
> depends on MFD_DM355EVM_MSP
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 403a1a5..a631283 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
> obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
> obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
> obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
> +obj-$(CONFIG_INPUT_DA9062_ONKEY) += da9062-onkey.o

Can we maybe keep the same naming convention for all of these? Also, any
chance all of them or some of them can be combined?

> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
> obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o
> obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
> diff --git a/drivers/input/misc/da9062-onkey.c b/drivers/input/misc/da9062-onkey.c
> new file mode 100644
> index 0000000..c4c0295
> --- /dev/null
> +++ b/drivers/input/misc/da9062-onkey.c
> @@ -0,0 +1,223 @@
> +/*
> + * da9062-onkey.c - ONKEY device driver for DA9062
> + * Copyright (C) 2015 Dialog Semiconductor Ltd.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/errno.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/workqueue.h>
> +#include <linux/regmap.h>
> +#include <linux/of.h>
> +#include <linux/mfd/da9062/core.h>
> +#include <linux/mfd/da9062/registers.h>
> +
> +struct da9062_onkey {
> + struct da9062 *hw;
> + struct delayed_work work;
> + struct input_dev *input;
> + int irq;
> + bool key_power;
> +};
> +
> +static void da9062_poll_on(struct work_struct *work)
> +{
> + struct da9062_onkey *onkey = container_of(work, struct da9062_onkey,
> + work.work);
> + unsigned int val;
> + int fault_log = 0;
> + bool poll = true;
> + int ret;
> +
> + /* poll to see when the pin is released */
> + ret = regmap_read(onkey->hw->regmap, DA9062AA_STATUS_A, &val);
> + if (ret < 0) {
> + dev_err(&onkey->input->dev,
> + "Failed to read ON status: %d\n", ret);
> + goto err_poll;
> + }
> +
> + if (!(val & DA9062AA_NONKEY_MASK)) {
> + ret = regmap_update_bits(onkey->hw->regmap,
> + DA9062AA_CONTROL_B,
> + DA9062AA_NONKEY_LOCK_MASK, 0);
> + if (ret < 0) {
> + dev_err(&onkey->input->dev,
> + "Failed to reset the Key Delay %d\n", ret);
> + goto err_poll;
> + }
> +
> + input_report_key(onkey->input, KEY_POWER, 0);
> + input_sync(onkey->input);
> +
> + poll = false;
> + }
> +
> + /* if the fault log KEY_RESET is detected,
> + * then clear it and shutdown DA9062 via I2C
> + */
> + ret = regmap_read(onkey->hw->regmap, DA9062AA_FAULT_LOG, &fault_log);
> + if (ret < 0)
> + dev_warn(&onkey->input->dev, "Cannot read FAULT_LOG\n");
> +
> + if (fault_log & DA9062AA_KEY_RESET_MASK) {
> + ret = regmap_write(onkey->hw->regmap,
> + DA9062AA_FAULT_LOG,
> + DA9062AA_KEY_RESET_MASK);
> + if (ret < 0)
> + dev_warn(&onkey->input->dev,
> + "Cannot reset KEY_RESET fault log\n");
> + else {
> + /* at this point we do any S/W housekeeping
> + * and then send shutdown command
> + */
> + dev_info(&onkey->input->dev,
> + "Sending SHUTDOWN to DA9062 ...\n");
> + ret = regmap_write(onkey->hw->regmap,
> + DA9062AA_CONTROL_F,
> + DA9062AA_SHUTDOWN_MASK);
> + if (ret < 0)
> + dev_err(&onkey->input->dev,
> + "Cannot SHUTDOWN DA9062\n");
> + }
> + }

This entire block seems to not belong to the input portion of MFD. Why
do we do it here?

> +
> +err_poll:
> + if (poll)
> + schedule_delayed_work(&onkey->work, 50);
> +}
> +
> +static irqreturn_t da9062_onkey_irq_handler(int irq, void *data)
> +{
> + struct da9062_onkey *onkey = data;
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(onkey->hw->regmap, DA9062AA_STATUS_A, &val);
> + if (onkey->key_power && (ret >= 0) && (val & DA9062AA_NONKEY_MASK)) {
> + input_report_key(onkey->input, KEY_POWER, 1);
> + input_sync(onkey->input);
> + schedule_delayed_work(&onkey->work, 0);
> + dev_notice(&onkey->input->dev, "KEY_POWER pressed.\n");
> + } else {
> + input_report_key(onkey->input, KEY_SLEEP, 1);
> + input_sync(onkey->input);
> + input_report_key(onkey->input, KEY_SLEEP, 0);
> + input_sync(onkey->input);
> + dev_notice(&onkey->input->dev, "KEY_SLEEP pressed.\n");
> + }

Why do we handle KEY_POWER and KEY_SLEEP completely differently?

> +
> + return IRQ_HANDLED;
> +}
> +
> +static int da9062_onkey_probe(struct platform_device *pdev)
> +{
> + struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
> + struct da9062_onkey *onkey;
> + bool kp_tmp = true;
> + int ret = 0;
> +
> + kp_tmp = of_property_read_bool((&pdev->dev)->of_node,
> + "dlg,disable-key-power");
> + kp_tmp = !kp_tmp;

Should we just allow specifying the keycode instead of hardcoding
KEY_POWER/KEY_SLEEP?

> +
> +
> + onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9062_onkey),
> + GFP_KERNEL);
> + if (!onkey) {
> + dev_err(&pdev->dev, "Failed to allocate memory.\n");
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + INIT_DELAYED_WORK(&onkey->work, da9062_poll_on);
> +
> + onkey->input = devm_input_allocate_device(&pdev->dev);
> + if (!onkey->input) {
> + dev_err(&pdev->dev, "Failed to allocated input device.\n");
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + ret = platform_get_irq_byname(pdev, "ONKEY");
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to get platform IRQ.\n");
> + goto err;
> + }
> + onkey->irq = ret;
> +
> + ret = request_threaded_irq(onkey->irq, NULL,
> + da9062_onkey_irq_handler,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + "ONKEY", onkey);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Failed to request input device IRQ.\n");
> + goto err;
> + }
> +
> + onkey->hw = chip;
> + onkey->key_power = kp_tmp;
> + onkey->input->evbit[0] = BIT_MASK(EV_KEY);
> + onkey->input->name = "da9062-onkey";
> + onkey->input->phys = "da9062-onkey/input0";
> + onkey->input->dev.parent = &pdev->dev;
> +
> + if (onkey->key_power)
> + input_set_capability(onkey->input, EV_KEY, KEY_POWER);
> + input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
> +
> + ret = input_register_device(onkey->input);
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Failed to register input device.\n");
> + goto err_irq;
> + }
> +
> + platform_set_drvdata(pdev, onkey);
> + return 0;
> +
> +err_irq:
> + free_irq(onkey->irq, onkey);
> + cancel_delayed_work_sync(&onkey->work);
> +err:
> + return ret;
> +}
> +
> +static int da9062_onkey_remove(struct platform_device *pdev)
> +{
> + struct da9062_onkey *onkey = platform_get_drvdata(pdev);
> +
> + free_irq(onkey->irq, onkey);
> + cancel_delayed_work_sync(&onkey->work);
> + input_unregister_device(onkey->input);

No need to unregister explicitly if you allocated input device with
devm.

> + return 0;
> +}
> +
> +static struct platform_driver da9062_onkey_driver = {
> + .probe = da9062_onkey_probe,
> + .remove = da9062_onkey_remove,
> + .driver = {
> + .name = "da9062-onkey",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +module_platform_driver(da9062_onkey_driver);
> +
> +MODULE_AUTHOR("S Twiss <stwiss.opensource@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ONKEY device driver for Dialog DA9062");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform: da9062-onkey");
> --
> end-of-patch for PATCH V1
>

Thanks.

--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/