Re: [PATCH 2/2] i2c, i2c_imc: Add DIMM bus code

From: Guenter Roeck
Date: Sat Mar 07 2015 - 11:04:19 EST


On 03/06/2015 06:50 PM, Andy Lutomirski wrote:
Add i2c_scan_dimm_bus to declare that a particular i2c_adapter
contains DIMMs. This will probe (and autoload modules!) for useful
SMBUS devices that live on DIMMs. i2c_imc calls it.

As more SMBUS-addressable DIMM components become supported, this
code can be extended to probe for them.

Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxxxxxx>

Similar to the other patch, I would suggest to run it through checkpatch.

---
drivers/i2c/busses/Kconfig | 4 ++
drivers/i2c/busses/Makefile | 4 ++
drivers/i2c/busses/dimm-bus.c | 97 +++++++++++++++++++++++++++++++++++++++++++
drivers/i2c/busses/i2c-imc.c | 3 ++
include/linux/i2c/dimm-bus.h | 24 +++++++++++
5 files changed, 132 insertions(+)
create mode 100644 drivers/i2c/busses/dimm-bus.c
create mode 100644 include/linux/i2c/dimm-bus.h

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d6b9ce164fbf..2ea6648492eb 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -149,6 +149,10 @@ config I2C_ISMT
This driver can also be built as a module. If so, the module will be
called i2c-ismt.

+config I2C_DIMM_BUS
+ tristate
+ default n
+
config I2C_IMC
tristate "Intel iMC (LGA 2011) SMBus Controller"
depends on PCI && X86
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 4287c891e782..a01bdcc0e239 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -25,6 +25,10 @@ obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_VIA) += i2c-via.o
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o

+# DIMM busses
+obj-$(CONFIG_I2C_DIMM_BUS) += dimm-bus.o
+obj-$(CONFIG_I2C_IMC) += i2c-imc.o
+
# Mac SMBus host controller drivers
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
diff --git a/drivers/i2c/busses/dimm-bus.c b/drivers/i2c/busses/dimm-bus.c
new file mode 100644
index 000000000000..096842811199
--- /dev/null
+++ b/drivers/i2c/busses/dimm-bus.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2013 Andrew Lutomirski <luto@xxxxxxxxxxxxxx>

2013 ?

+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/bug.h>
+#include <linux/module.h>
+#include <linux/i2c/dimm-bus.h>
+
+static bool probe_addr(struct i2c_adapter *adapter, int addr)
+{
+ /*
+ * So far, all known devices that live on DIMMs can be safely
+ * and reliably detected by trying to read a byte at address
+ * zero. (The exception is the SPD write protection control,
+ * which can't be probed and requires special hardware and/or
+ * quick writes to access, and has no driver.)
+ */

That leads to the question if the controller supports quick commands,
and if it does, if would make sense to add support for it,
just for the purpose of reducing risk here.


+ union i2c_smbus_data dummy;
+ return i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &dummy) >= 0;
+}
+
+/**
+ * i2c_scan_dimm_bus() - Scans an SMBUS segment known to contain DIMMs
+ * @adapter: The SMBUS adapter to scan
+ *
+ * This function tells the DIMM-bus code that the adapter is known to
+ * contain DIMMs. i2c_scan_dimm_bus will probe for devices known to
+ * live on DIMMs.
+ *
+ * Do NOT call this function on general-purpose system SMBUS segments
+ * unless you know that the only things on the bus are DIMMs.
+ * Otherwise is it very likely to mis-identify other things on the
+ * bus.
+ *
+ * Callers are advised not to set adapter->class = I2C_CLASS_SPD.

Why not ?

+ */
+void i2c_scan_dimm_bus(struct i2c_adapter *adapter)
+{
+ struct i2c_board_info info = {};
+ int slot;
+
+ /*
+ * We probe with "read byte data". If any DIMM SMBUS driver can't
+ * support that access type, this function should be updated.
+ */
+ if (WARN_ON(!i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA)))
+ return;
+
+ /*
+ * Addresses on DIMMs use the three low bits to identify the slot
+ * and the four high bits to identify the device type. Known
+ * devices are:
+ *
+ * - 0x50 - 0x57: SPD (Serial Presence Detect) EEPROM
+ * - 0x30 - 0x37: SPD WP control -- not worth trying to probe

Not worth, or just "not probed" ?

+ * - 0x18 - 0x1f: TSOD (Temperature Sensor on DIMM)
+ *
+ * There may be more some day.

That is always a possibility. Does that really warrant this comment ?

+ */
+ for (slot = 0; slot < 8; slot++) {
+ /* If there's no SPD, then assume there's no DIMM here. */
+ if (!probe_addr(adapter, 0x50 | slot))
+ continue;
+
+ strcpy(info.type, "spd");
+ info.addr = 0x50 | slot;
+ i2c_new_device(adapter, &info);
+
+ if (probe_addr(adapter, 0x18 | slot)) {
+ /* This is a temperature sensor. */
+ strcpy(info.type, "jc42");
+ info.addr = 0x18 | slot;
+ i2c_new_device(adapter, &info);

How are those devices removed ? Might warrant an explanation.

+ }
+ }
+}
+EXPORT_SYMBOL(i2c_scan_dimm_bus);
+
+MODULE_AUTHOR("Andrew Lutomirski <luto@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("i2c DIMM bus support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-imc.c b/drivers/i2c/busses/i2c-imc.c
index 2dbf171114c6..f9d535a99035 100644
--- a/drivers/i2c/busses/i2c-imc.c
+++ b/drivers/i2c/busses/i2c-imc.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/i2c.h>
+#include <linux/i2c/dimm-bus.h>

/*
* The datasheet can be found here, for example:
@@ -425,6 +426,8 @@ static int imc_init_channel(struct imc_priv *priv, int i, int socket)
return err;
}

+ i2c_scan_dimm_bus(&ch->adapter);
+
return 0;
}

diff --git a/include/linux/i2c/dimm-bus.h b/include/linux/i2c/dimm-bus.h
new file mode 100644
index 000000000000..3d44df43cf30
--- /dev/null
+++ b/include/linux/i2c/dimm-bus.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2013 Andrew Lutomirski <luto@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _I2C_DIMM_BUS
+#define _I2C_DIMM_BUS
+
+struct i2c_adapter;
+void i2c_scan_dimm_bus(struct i2c_adapter *adapter);
+
+#endif /* _I2C_DIMM_BUS */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/