Re: [PATCH] ARM: at91/dt: add uart0 to sama5d3 DT

From: Jean-Christophe PLAGNIOL-VILLARD
Date: Wed Mar 04 2015 - 16:13:30 EST


On 17:26 Wed 04 Mar , Nicolas Ferre wrote:
> Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

please keep in Cc for at91 related work

Best Regards,
J.
> ---
> arch/arm/boot/dts/sama5d3.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index e30fee2edd55..def05e20e9d6 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -26,6 +26,7 @@
> serial2 = &usart1;
> serial3 = &usart2;
> serial4 = &usart3;
> + serial5 = &uart0;
> gpio0 = &pioA;
> gpio1 = &pioB;
> gpio2 = &pioC;
> @@ -206,6 +207,17 @@
> status = "disabled";
> };
>
> + uart0: serial@f0024000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xf0024000 0x100>;
> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart0>;
> + clocks = <&uart0_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> pwm0: pwm@f002c000 {
> compatible = "atmel,sama5d3-pwm";
> reg = <0xf002c000 0x300>;
> @@ -764,6 +776,14 @@
> };
> };
>
> + uart0 {
> + pinctrl_uart0: uart0-0 {
> + atmel,pins =
> + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */
> + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */
> + };
> + };
> +
> usart0 {
> pinctrl_usart0: usart0-0 {
> atmel,pins =
> @@ -1098,6 +1118,12 @@
> atmel,clk-output-range = <0 66000000>;
> };
>
> + uart0_clk: uart0_clk {
> + #clock-cells = <0>;
> + reg = <16>;
> + atmel,clk-output-range = <0 66000000>;
> + };
> +
> twi0_clk: twi0_clk {
> reg = <18>;
> #clock-cells = <0>;
> --
> 2.1.3
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/