[PATCH] dt: spi: fsl-imx-cspi: add explicit compatible strings and required clock properties

From: Matt Porter
Date: Wed Mar 04 2015 - 14:13:10 EST


The fsl-imx-cspi binding contains language indicating compatible
strings to be used that is not valid for all supported parts
e.g. Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi". Fix this
by enumerating the set of valid compatible strings.

The binding is also missing the clocks/clock-names properties
so document these and the two required ipg and per clocks.

Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index aad527b..523341a 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -2,11 +2,21 @@
(CSPI/eCSPI) for i.MX

Required properties:
-- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi"
+- compatible :
+ - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1
+ - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21
+ - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27
+ - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31
+ - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35
+ - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51
- reg : Offset and length of the register set for the device
- interrupts : Should contain CSPI/eCSPI interrupt
- fsl,spi-num-chipselects : Contains the number of the chipselect
- cs-gpios : Specifies the gpio pins to be used for chipselects.
+- clocks : Clock specifiers for both ipg and per clocks.
+- clock-names : Clock names should include both "ipg" and "per"
+See the clock consumer binding,
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "tx" and "rx" if present.
--
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/