Re: [PATCH 3/4] mmc: sdio: support switching to 1-bit before turning off clocks

[Tony Lindgren]

* NeilBrown <neilb@xxxxxxx> [150303 21:29]:
> On Tue, 3 Mar 2015 14:53:55 -0800 Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > 
> > --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> > +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> > @@ -367,6 +367,7 @@
> >  };
> >  
> >  &mmc2 {
> > +	interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
> >  	vmmc-supply = <&vaux4>;
> >  	bus-width = <4>;
> >  	ti,non-removable;
> 
> I had 
> 
> +       interrupts-extended = <&intc 86 &gpio5 5 0>; /* GPIO_133 */
> +       pinctrl-names = "default", "idle";
> +       pinctrl-0 = <&mmc2_pins>;
> +       pinctrl-1 = <&mmc2_cirq_pin>;
> 
> together with
> 
> +       mmc2_cirq_pin: pinmux_cirq_pin {
> +               pinctrl-single,pins = <
> +                       OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE4) 
> +               >;
> +       };
> +
> 
> 
> and a longer definition for mmc2_pins.
> 
> Is that one line reconfigure the pin on demand?  How does that work?

Well the remuxing of the mmc2 dat1 pin is not needed on omap3/4/5.
These SoCs have the iochain wake-up events.

Remuxing is needed on SoCs with no iochain wake-up events, such as
am355x, am437x and dra7 variants.

Not sure if we actually have the gpio5 bank wake-up the system
properly currently from off-idle. It could be that only gpio1 bank
is currently capable of wake-up from off-idle without needing
to use the iochain wake-up also for GPIO lines.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/