[PATCH 3.19 115/175] tty/serial: at91: enable peripheral clock before accessing I/O registers

From: Greg Kroah-Hartman
Date: Wed Mar 04 2015 - 01:42:34 EST


3.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>

commit d4f641876a68d1961e30c202709cc2d484f69f6f upstream.

atmel_serial_probe() calls atmel_init_port(). In turn, atmel_init_port() calls
clk_disable_unprepare() to disable the peripheral clock before returning.

Later atmel_serial_probe() accesses some I/O registers such as the Mode and
Control registers for RS485 support then the Name and Version registers, through a call to
atmel_get_ip_name(), but at that moment the peripheral clock was still
disabled.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/tty/serial/atmel_serial.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2596,6 +2596,12 @@ static int atmel_serial_probe(struct pla
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);

+ /*
+ * The peripheral clock has been disabled by atmel_init_port():
+ * enable it before accessing I/O registers
+ */
+ clk_prepare_enable(port->clk);
+
if (rs485_enabled) {
UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
@@ -2606,6 +2612,12 @@ static int atmel_serial_probe(struct pla
*/
atmel_get_ip_name(&port->uart);

+ /*
+ * The peripheral clock can now safely be disabled till the port
+ * is used
+ */
+ clk_disable_unprepare(port->clk);
+
return 0;

err_add_port:


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/