Re: [PATCH] rtc: add Abracon ABx80x driver

From: Joe Perches
Date: Sat Feb 28 2015 - 14:32:37 EST


On Sat, 2015-02-28 at 20:14 +0100, Alexandre Belloni wrote:
> Add support for the i2c RTC from Abracon.

Perhaps you can run this through
$ ./scripts/checkpatch.pl --strict --fix-inplace

Is there going to be a MAINTAINERS entry for this driver?

> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
[]
> @@ -22,6 +22,7 @@ rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
>
> obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
> obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
> +obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o

alphabetic order?

> obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
> obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
> obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o

[]

> diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
[]
> +static int ab08xx_get_datetime(struct i2c_client *client, struct rtc_time *tm)
> +{
> + unsigned char date[8];
> + int err;
> +
> + /* Now read time and date */
> + err = i2c_smbus_read_i2c_block_data(client, AB08XX_REG_HTH,
> + 8, date);
> + if (err < 0) {
> + dev_err(&client->dev, "Unable to read date\n");
> + return -EIO;
> + }
> +
> + tm->tm_sec = bcd2bin(date[AB08XX_REG_SC] & 0x7F);
> + tm->tm_min = bcd2bin(date[AB08XX_REG_MN] & 0x7F);
> + tm->tm_hour = bcd2bin(date[AB08XX_REG_HR] & 0x3F);
> + tm->tm_wday = date[AB08XX_REG_WD] & 0x7;
> + tm->tm_mday = bcd2bin(date[AB08XX_REG_DA] & 0x3F);
> + tm->tm_mon = bcd2bin(date[AB08XX_REG_MO] & 0x1F) - 1;
> + tm->tm_year = bcd2bin(date[AB08XX_REG_YR]);
> + if (tm->tm_year < 70)
> + tm->tm_year += 100;
> +
> + err = rtc_valid_tm(tm);
> + if (err < 0)
> + dev_err(&client->dev, "retrieved date/time is not valid.\n");

Is setting the date to a known bad value really the desired thing?

> +static int ab08xx_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct rtc_device *rtc;
> + int data, err, part0, part1;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> + return -ENODEV;
> +
> +
> + part0 = i2c_smbus_read_byte_data(client, AB08XX_REG_PART0);
> + part1 = i2c_smbus_read_byte_data(client, AB08XX_REG_PART1);
> + if ((part0 < 0) || (part1 < 0)) {
> + dev_err(&client->dev, "Unable to read part number\n");
> + return -EIO;
> + }
> + dev_info(&client->dev, "chip found %2x%2x\n", part0, part1);

"%02x%02x" ?


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/