Re: regression in 4.0.0-rc1 with r8169 ethernet

From: Thomas Voegtle
Date: Sat Feb 28 2015 - 05:04:44 EST

Next message: Brian Norris: "[PATCH 1/7] mtd: docg3: drop dead code"
Previous message: Brian Norris: "[PATCH 4/7] mtd: nand: fixup bounds checks for nand_{lock,unlock}()"
In reply to: Jiang Liu: "Re: regression in 4.0.0-rc1 with r8169 ethernet"
Next in thread: Jiang Liu: "Re: regression in 4.0.0-rc1 with r8169 ethernet"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sat, 28 Feb 2015, Jiang Liu wrote:

On 2015/2/28 6:24, Rafael J. Wysocki wrote:

On Friday, February 27, 2015 03:50:32 PM Thomas Voegtle wrote:

Hi,

I have the same problem with a Asrock Q1900B-ITX mainboard with
a Intel Celeron J1900 onboard.

I did a bisect and ended up with:

593669c2ac0fe18baee04a3cd5539a148aa48574 is the first bad commit

commit 593669c2ac0fe18baee04a3cd5539a148aa48574
Author: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
Date: Thu Feb 5 13:44:46 2015 +0800

x86/PCI/ACPI: Use common ACPI resource interfaces to simplify
implementation

I can revert this quite big commit on current git head (4f671fe) with no
problems and then everything is fine again.

Thanks for nailing this one!

It really wasn't supposed to make any functional difference, though, so there
must be some subtle mistake that escaped everyone in it.

I'll have a look at that and hopefully Jiang Liu will be able to help in the
meantime too.

Hi all,
Sorry for slow response, just return from Chinese New Holidays:)
Hi Thomas,
Could you please help to provide the dmesgs before and after the
revert?

Attached.

Thanks,

Thomas[ 0.000000] Linux version 4.0.0-rc1-celeron-00037-gec3360c (thomas@maggie) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #218 SMP Sat Feb 28 10:54:22 CET 2015
[ 0.000000] Command line: root=/dev/sda3 console=ttyS0,115200N8 panic=30
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000079578fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079579000-0x00000000795a8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000795a9000-0x00000000795fcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000795fd000-0x000000007970dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007970e000-0x0000000079a7afff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079a7b000-0x0000000079a7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079a7c000-0x0000000079abdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079abe000-0x0000000079c2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079c2c000-0x0000000079ff9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900B-ITX, BIOS P1.70 11/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07A800000 mask FFF800000 uncachable
[ 0.000000] 2 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a0f000, 0x01a0ffff] PGTABLE
[ 0.000000] BRK [0x01a10000, 0x01a10fff] PGTABLE
[ 0.000000] BRK [0x01a11000, 0x01a11fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79200000-0x793fffff]
[ 0.000000] [mem 0x79200000-0x793fffff] page 2M
[ 0.000000] BRK [0x01a12000, 0x01a12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x791fffff]
[ 0.000000] [mem 0x60000000-0x791fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[ 0.000000] [mem 0x40000000-0x5fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x3fffffff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] BRK [0x01a13000, 0x01a13fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79400000-0x79578fff]
[ 0.000000] [mem 0x79400000-0x79578fff] page 4k
[ 0.000000] BRK [0x01a14000, 0x01a14fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x795a9000-0x795fcfff]
[ 0.000000] [mem 0x795a9000-0x795fcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79a7b000-0x79a7bfff]
[ 0.000000] [mem 0x79a7b000-0x79a7bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79abe000-0x79c2bfff]
[ 0.000000] [mem 0x79abe000-0x79c2bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79ffa000-0x79ffffff]
[ 0.000000] [mem 0x79ffa000-0x79ffffff] page 4k
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x0000000079683080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007968E3C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150204/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x0000000079683190 00B229 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007970DF80 000040
[ 0.000000] ACPI: APIC 0x000000007968E4D0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007968E558 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007968E5A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: LPIT 0x000000007968E5E0 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
[ 0.000000] ACPI: AAFT 0x000000007968E6E8 0000D7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007968E7C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007968E7F8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007968EF60 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007968F1F0 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000007968F370 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076c00000-ffff880078bfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020100000-0x0000000079578fff]
[ 0.000000] node 0: [mem 0x00000000795a9000-0x00000000795fcfff]
[ 0.000000] node 0: [mem 0x0000000079a7b000-0x0000000079a7bfff]
[ 0.000000] node 0: [mem 0x0000000079abe000-0x0000000079c2bfff]
[ 0.000000] node 0: [mem 0x0000000079ffa000-0x0000000079ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[ 0.000000] On node 0 totalpages: 497117
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7744 pages used for memmap
[ 0.000000] DMA32 zone: 493122 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x4f])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res edge lint[0xcb])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] res edge lint[0x9d])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high dfl lint[0x5e])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79579000-0x795a8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x795fd000-0x7970dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7970e000-0x79a7afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79a7c000-0x79abdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79c2c000-0x79ff9fff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880079200000 s79704 r0 d30888 u524288
[ 0.000000] pcpu-alloc: s79704 r0 d30888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489288
[ 0.000000] Kernel command line: root=/dev/sda3 console=ttyS0,115200N8 panic=30
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 251304(95%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1940648K/1988468K available (5080K kernel code, 526K rwdata, 1828K rodata, 780K init, 768K bss, 47820K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x18
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1996800 KHz
[ 0.000000] lapic_timer_frequency = 332800
[ 0.000000] tsc: Detected 1996.800 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200)
[ 0.011038] pid_max: default: 32768 minimum: 301
[ 0.015680] ACPI: Core revision 20150204
[ 0.045999] ACPI: All ACPI Tables successfully acquired
[ 0.051565] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.058290] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.065691] CPU: Physical Processor ID: 0
[ 0.069723] CPU: Processor Core ID: 0
[ 0.073404] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.079429] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.091258] mce: CPU supports 6 MCE banks
[ 0.095293] CPU0: Thermal monitoring enabled (TM1)
[ 0.100100] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.105516] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.111918] Freeing SMP alternatives memory: 20K (ffffffff81948000 - ffffffff8194d000)
[ 0.120642] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.166207] TSC deadline timer enabled
[ 0.166212] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (fam: 06, model: 37, stepping: 03)
[ 0.175705] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.186112] ... version: 3
[ 0.190133] ... bit width: 40
[ 0.194239] ... generic registers: 2
[ 0.198260] ... value mask: 000000ffffffffff
[ 0.203584] ... max period: 000000ffffffffff
[ 0.208907] ... fixed-purpose events: 3
[ 0.212925] ... event mask: 0000000700000003
[ 0.219210] x86: Booting SMP configuration:
[ 0.223423] .... node #0, CPUs: #1 #2 #3
[ 0.281599] x86: Booted up 1 node, 4 CPUs
[ 0.285822] smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
[ 0.293022] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.301362] devtmpfs: initialized
[ 0.304964] PM: Registering ACPI NVS region [mem 0x795fd000-0x7970dfff] (1118208 bytes)
[ 0.313261] RTC time: 9:56:33, date: 02/28/15
[ 0.317901] NET: Registered protocol family 16
[ 0.329130] cpuidle: using governor ladder
[ 0.341274] cpuidle: using governor menu
[ 0.345254] ACPI: bus type PCI registered
[ 0.349300] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.358626] PCI: not using MMCONFIG
[ 0.362127] PCI: Using configuration type 1 for base access
[ 0.377727] ACPI: Added _OSI(Module Device)
[ 0.381924] ACPI: Added _OSI(Processor Device)
[ 0.386385] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.391098] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.415279] ACPI: Dynamic OEM Table Load:
[ 0.419350] ACPI: SSDT 0xFFFF880078D66400 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.429283] ACPI: Dynamic OEM Table Load:
[ 0.433356] ACPI: SSDT 0xFFFF880078D66800 0003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.443950] ACPI: Dynamic OEM Table Load:
[ 0.448020] ACPI: SSDT 0xFFFF880078F13000 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.457856] ACPI: Dynamic OEM Table Load:
[ 0.461925] ACPI: SSDT 0xFFFF880078C73B40 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.474001] ACPI: Interpreter enabled
[ 0.477689] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.486979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.496287] ACPI: (supports S0 S3 S4 S5)
[ 0.500215] ACPI: Using IOAPIC for interrupt routing
[ 0.505391] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.516443] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.525634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.547845] ACPI: Power Resource [USBC] (on)
[ 0.554453] ACPI: Power Resource [PLPE] (on)
[ 0.559221] ACPI: Power Resource [PLPE] (on)
[ 0.575729] ACPI: Power Resource [CLK0] (on)
[ 0.580109] ACPI: Power Resource [CLK1] (on)
[ 0.660049] ACPI: Power Resource [FN00] (off)
[ 0.665866] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.672070] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.680735] \_SB_.PCI0:_OSC invalid UUID
[ 0.680738] _OSC request data:1 1f 0
[ 0.680746] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.688164] PCI host bridge to bus 0000:00
[ 0.692280] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.697783] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.703972] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.710163] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.716355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.723242] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.730127] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.737015] pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0716ffe]
[ 0.743909] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.744135] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.744152] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ 0.744165] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.744178] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
[ 0.744416] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.744439] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
[ 0.744450] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
[ 0.744461] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
[ 0.744471] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.744482] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.744493] pci 0000:00:13.0: reg 0x24: [mem 0xd0716000-0xd07167ff]
[ 0.744549] pci 0000:00:13.0: PME# supported from D3hot
[ 0.744751] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.744773] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
[ 0.744841] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.745017] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.750775] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.750803] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ 0.750819] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ 0.750931] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.751133] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.751159] pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]
[ 0.751239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.751436] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.751508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.751704] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.751776] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.751969] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.752041] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.752238] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.752310] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.752510] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.752775] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.752813] pci 0000:00:1f.3: reg 0x10: [mem 0xd0714000-0xd071401f]
[ 0.752886] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.753242] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.758327] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.758350] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.758380] pci 0000:02:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
[ 0.758399] pci 0000:02:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref]
[ 0.758500] pci 0000:02:00.0: supports D1 D2
[ 0.758504] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.758561] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.772269] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.777250] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.777256] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.777346] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.782417] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.787425] pci_bus 0000:00: on NUMA node 0
[ 0.789188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.796509] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.803830] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.811150] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.818462] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.825787] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.834270] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.841583] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.852256] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.857298] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.862966] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.871078] vgaarb: loaded
[ 0.873795] vgaarb: bridge control possible 0000:00:02.0
[ 0.879239] SCSI subsystem initialized
[ 0.883018] libata version 3.00 loaded.
[ 0.883041] ACPI: bus type USB registered
[ 0.887098] usbcore: registered new interface driver usbfs
[ 0.892613] usbcore: registered new interface driver hub
[ 0.897962] usbcore: registered new device driver usb
[ 0.903066] Linux video capture interface: v2.00
[ 0.907741] PCI: Using ACPI for IRQ routing
[ 0.917852] PCI: pci_cache_line_size set to 64 bytes
[ 0.917896] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.917900] e820: reserve RAM buffer [mem 0x79579000-0x7bffffff]
[ 0.917903] e820: reserve RAM buffer [mem 0x795fd000-0x7bffffff]
[ 0.917906] e820: reserve RAM buffer [mem 0x79a7c000-0x7bffffff]
[ 0.917909] e820: reserve RAM buffer [mem 0x79c2c000-0x7bffffff]
[ 0.917912] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.918161] Switched to clocksource refined-jiffies
[ 0.923194] pnp: PnP ACPI init
[ 0.926352] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.926614] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.932549] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.938485] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.944418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.944687] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.950627] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.951625] pnp 00:03: [dma 3]
[ 0.951926] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 PNP0401 (active)
[ 0.952480] pnp 00:04: [dma 0 disabled]
[ 0.952572] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.953481] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.960458] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.967090] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.973714] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.980338] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 0.986965] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.993591] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.000215] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.006841] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[ 1.013469] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.016770] pnp: PnP ACPI: found 6 devices
[ 1.028886] Switched to clocksource acpi_pm
[ 1.033119] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.033126] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1.033131] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 1.033142] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 1.033152] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1.033157] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 1.033161] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 1.033170] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 1.033177] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 1.033182] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 1.033192] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.033196] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.033200] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.033205] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.033209] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.033213] pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.033217] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.033221] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.033225] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.033229] pci 0000:00:1c.3: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.033239] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 1.040062] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 1.047838] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 1.055607] pci 0000:00:1c.2: BAR 8: assigned [mem 0x80600000-0x807fffff]
[ 1.062427] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 1.070205] pci 0000:00:1c.3: BAR 8: assigned [mem 0x80a00000-0x80bfffff]
[ 1.077024] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80c00000-0x80dfffff 64bit pref]
[ 1.084794] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.090913] pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff]
[ 1.097035] pci 0000:00:1c.3: BAR 7: assigned [io 0x3000-0x3fff]
[ 1.103159] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.108150] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.114273] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 1.121089] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 1.128865] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.133855] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.139976] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.146795] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 1.154571] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.159568] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.165691] pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff]
[ 1.172507] pci 0000:00:1c.2: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 1.180280] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.185270] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 1.191393] pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80bfffff]
[ 1.198209] pci 0000:00:1c.3: bridge window [mem 0x80c00000-0x80dfffff 64bit pref]
[ 1.205982] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 1.205986] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 1.205990] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 1.205994] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 1.205997] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 1.206001] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 1.206005] pci_bus 0000:00: resource 10 [mem 0x80000000-0xd0716ffe]
[ 1.206009] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.206013] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[ 1.206016] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 1.206020] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 1.206024] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
[ 1.206028] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 1.206032] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.206035] pci_bus 0000:03: resource 1 [mem 0x80600000-0x807fffff]
[ 1.206039] pci_bus 0000:03: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 1.206043] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 1.206047] pci_bus 0000:04: resource 1 [mem 0x80a00000-0x80bfffff]
[ 1.206050] pci_bus 0000:04: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref]
[ 1.206095] NET: Registered protocol family 2
[ 1.210691] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.217987] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.224701] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.231297] TCP: reno registered
[ 1.234550] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.240598] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.247125] NET: Registered protocol family 1
[ 1.251538] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.251768] PCI: CLS 64 bytes, default 64
[ 1.252122] microcode: CPU0 sig=0x30673, pf=0x4, revision=0x321
[ 1.258063] microcode: CPU1 sig=0x30673, pf=0x4, revision=0x321
[ 1.264023] microcode: CPU2 sig=0x30673, pf=0x4, revision=0x321
[ 1.269963] microcode: CPU3 sig=0x30673, pf=0x4, revision=0x321
[ 1.275997] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.285147] Scanning for low memory corruption every 60 seconds
[ 1.292060] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.300982] zpool: loaded
[ 1.303629] zbud: loaded
[ 1.307085] ntfs: driver 2.1.31 [Flags: R/O].
[ 1.311564] fuse init (API version 7.23)
[ 1.316535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.323958] io scheduler noop registered
[ 1.327906] io scheduler deadline registered (default)
[ 1.333851] intel_idle: MWAIT substates: 0x33000020
[ 1.333855] intel_idle: v0.4 model 0x37
[ 1.333858] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.334329] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.342705] ACPI: Power Button [PWRB]
[ 1.346462] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.354843] ACPI: Sleep Button [SLPB]
[ 1.358610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.366036] ACPI: Power Button [PWRF]
[ 1.374979] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.380669] ACPI: Thermal Zone [TZ01] (27 C)
[ 1.385013] GHES: HEST is not enabled!
[ 1.388974] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 1.416017] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.429338] hpet: number irqs doesn't agree with number of timers
[ 1.435645] Non-volatile memory driver v1.3
[ 1.440071] rdac: device handler registered
[ 1.444524] hp_sw: device handler registered
[ 1.448822] emc: device handler registered
[ 1.452945] alua: device handler registered
[ 1.457221] ahci 0000:00:13.0: version 3.0
[ 1.457380] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[ 1.478076] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 1.486196] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso
[ 1.494948] scsi host0: ahci
[ 1.499584] scsi host1: ahci
[ 1.502617] ata1: SATA max UDMA/133 abar m2048@0xd0716000 port 0xd0716100 irq 87
[ 1.510039] ata2: DUMMY
[ 1.512541] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.518657] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.524201] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.529813] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.543151] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc9000003a000, d0:50:99:1a:cf:2c, XID 0c000800 IRQ 88
[ 1.553441] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.562068] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.567335] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.575146] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00001810
[ 1.583623] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.584584] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.591402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.598648] usb usb1: Product: xHCI Host Controller
[ 1.603554] usb usb1: Manufacturer: Linux 4.0.0-rc1-celeron-00037-gec3360c xhci-hcd
[ 1.611238] usb usb1: SerialNumber: 0000:00:14.0
[ 1.616185] hub 1-0:1.0: USB hub found
[ 1.619983] hub 1-0:1.0: 6 ports detected
[ 1.625449] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.630706] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.639204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.646019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.653266] usb usb2: Product: xHCI Host Controller
[ 1.658173] usb usb2: Manufacturer: Linux 4.0.0-rc1-celeron-00037-gec3360c xhci-hcd
[ 1.665858] usb usb2: SerialNumber: 0000:00:14.0
[ 1.670819] hub 2-0:1.0: USB hub found
[ 1.674664] hub 2-0:1.0: 1 port detected
[ 1.678972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.685535] ehci-pci: EHCI PCI platform driver
[ 1.690026] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.696461] usbcore: registered new interface driver usb-storage
[ 1.702536] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.712761] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.717782] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.724222] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 1.731629] rtc_cmos 00:00: RTC can wake from S4
[ 1.737042] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.743224] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 1.750166] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
[ 1.767055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.777295] saa7146: register extension 'budget_av'
[ 1.782241] usbcore: registered new interface driver dvb_usb_ttusb2
[ 1.790071] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@xxxxxxxxxx
[ 1.798549] Intel P-state driver initializing.
[ 1.803693] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.809349] usbcore: registered new interface driver usbhid
[ 1.814968] usbhid: USB HID core driver
[ 1.818920] TCP: cubic registered
[ 1.827163] Magic number: 3:922:930
[ 1.830608] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.837792] rtc_cmos 00:00: setting system clock to 2015-02-28 09:56:35 UTC (1425117395)
[ 1.837804] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 1.837807] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.858629] ata1.00: configured for UDMA/133
[ 1.858673] PM: Hibernation image not present or could not be loaded.
[ 1.863145] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 1.872523] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.872791] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.887304] sd 0:0:0:0: [sda] Write Protect is off
[ 1.892209] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.892459] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.934962] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.957837] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.965795] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.982163] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
[ 1.990826] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 2.036966] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.044823] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.075486] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 2.082402] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.089696] devtmpfs: mounted
[ 2.089698] usb 1-2: Product: USB2.0 Hub
[ 2.097234] hub 1-2:1.0: USB hub found
[ 2.101424] Freeing unused kernel memory: 780K (ffffffff81885000 - ffffffff81948000)
[ 2.101725] hub 1-2:1.0: 3 ports detected
[ 2.113461] Write protecting the kernel read-only data: 8192k
[ 2.121386] Freeing unused kernel memory: 1052K (ffff8800014f9000 - ffff880001600000)
[ 2.130717] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
[ 2.275375] tsc: Refined TSC clocksource calibration: 1999.997 MHz
[ 2.287636] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.479149] usb 1-3: New USB device found, idVendor=0b48, idProduct=300d
[ 2.486040] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.493329] usb 1-3: Product: TT-USB2.0
[ 2.497658] usb 1-3: Manufacturer: TechnoTrend
[ 2.502258] usb 1-3: SerialNumber: LHJNON
[ 2.507257] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state.
[ 2.515073] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2.523679] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2.532750] DVB: registering new adapter (Technotrend TT-connect CT-3650)
[ 2.542763] ttusb2: CI initialized.
[ 2.546348] usb 1-3: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
[ 2.561516] usb 1-3: DVB: registering adapter 0 frontend 1 (NXP TDA10048HN DVB-T)...
[ 2.570118] IR keymap rc-tt-1500 not found
[ 2.574321] Registered IR keymap rc-empty
[ 2.578637] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input6
[ 2.589598] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0
[ 2.599769] dvb-usb: schedule remote query interval to 150 msecs.
[ 2.839052] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.995347] systemd[1]: Failed to insert module 'autofs4'
[ 3.001638] systemd[1]: Failed to insert module 'ipv6'
[ 3.007402] systemd[1]: Set hostname to <maggie>.
[ 3.044908] random: systemd urandom read with 75 bits of entropy available
[ 3.282666] Switched to clocksource tsc
[ 3.311766] LVM: Logical Volume autoactivation enabled.
[ 3.317079] LVM: Activation generator successfully completed.
[ 4.017684] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.058810] systemd[1]: Starting Replay Read-Ahead Data...
[ 4.076052] systemd[1]: Starting Collect Read-Ahead Data...
[ 4.095759] systemd[1]: Expecting device dev-ttyS0.device...
[ 4.103587] systemd-readahead[88]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 4.127389] systemd[1]: Starting Syslog Socket.
[ 4.143702] systemd[1]: Listening on Syslog Socket.
[ 4.147620] random: nonblocking pool is initialized
[ 4.153565] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.171265] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.177075] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.195487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.202507] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.231803] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.237997] systemd[1]: Starting Journal Socket.
[ 4.251589] systemd[1]: Listening on Journal Socket.
[ 4.256688] systemd[1]: Mounted Huge Pages File System.
[ 4.261982] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 4.284494] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 4.293711] systemd[1]: Starting Create static device nodes in /dev...
[ 4.312405] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.328084] systemd[1]: Starting Journal Service...
[ 4.355621] systemd[1]: Started Journal Service.
[ 4.612007] dvb-usb: recv bulk message failed: -110
[ 4.616964] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[ 4.720371] systemd-journald[93]: Vacuuming done, freed 0 bytes
[ 5.501935] systemd-udevd[125]: starting version 208
[ 5.585582] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 6.628159] dvb-usb: recv bulk message failed: -110
[ 6.633068] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[ 6.642513] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected.
[ 8.673079] Adding 2097148k swap on /dev/sda1. Priority:42 extents:1 across:2097148k FS
[ 9.294414] EXT4-fs (sda5): barriers disabled
[ 10.246960] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
[ 12.971201] r8169 0000:02:00.0 eth0: link down
[ 12.971262] r8169 0000:02:00.0 eth0: link down
[ 13.557176] systemd-journald[93]: Received request to flush runtime journal from PID 1
[ 14.656839] r8169 0000:02:00.0 eth0: link up
[ 0.000000] Linux version 4.0.0-rc1-celeron-00036-g4f671fe (thomas@maggie) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #217 SMP Sat Feb 28 10:40:26 CET 2015
[ 0.000000] Command line: root=/dev/sda3 console=ttyS0,115200N8 panic=30
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000079578fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079579000-0x00000000795a8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000795a9000-0x00000000795fcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000795fd000-0x000000007970dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007970e000-0x0000000079a7afff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079a7b000-0x0000000079a7bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079a7c000-0x0000000079abdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079abe000-0x0000000079c2bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079c2c000-0x0000000079ff9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079ffa000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Q1900B-ITX, BIOS P1.70 11/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07A800000 mask FFF800000 uncachable
[ 0.000000] 2 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a0f000, 0x01a0ffff] PGTABLE
[ 0.000000] BRK [0x01a10000, 0x01a10fff] PGTABLE
[ 0.000000] BRK [0x01a11000, 0x01a11fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79200000-0x793fffff]
[ 0.000000] [mem 0x79200000-0x793fffff] page 2M
[ 0.000000] BRK [0x01a12000, 0x01a12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x791fffff]
[ 0.000000] [mem 0x60000000-0x791fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[ 0.000000] [mem 0x40000000-0x5fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x3fffffff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] BRK [0x01a13000, 0x01a13fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79400000-0x79578fff]
[ 0.000000] [mem 0x79400000-0x79578fff] page 4k
[ 0.000000] BRK [0x01a14000, 0x01a14fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x795a9000-0x795fcfff]
[ 0.000000] [mem 0x795a9000-0x795fcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79a7b000-0x79a7bfff]
[ 0.000000] [mem 0x79a7b000-0x79a7bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79abe000-0x79c2bfff]
[ 0.000000] [mem 0x79abe000-0x79c2bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x79ffa000-0x79ffffff]
[ 0.000000] [mem 0x79ffa000-0x79ffffff] page 4k
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x0000000079683080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007968E3C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150204/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x0000000079683190 00B229 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007970DF80 000040
[ 0.000000] ACPI: APIC 0x000000007968E4D0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007968E558 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007968E5A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: LPIT 0x000000007968E5E0 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
[ 0.000000] ACPI: AAFT 0x000000007968E6E8 0000D7 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007968E7C0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007968E7F8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007968EF60 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007968F1F0 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000007968F370 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076c00000-ffff880078bfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020100000-0x0000000079578fff]
[ 0.000000] node 0: [mem 0x00000000795a9000-0x00000000795fcfff]
[ 0.000000] node 0: [mem 0x0000000079a7b000-0x0000000079a7bfff]
[ 0.000000] node 0: [mem 0x0000000079abe000-0x0000000079c2bfff]
[ 0.000000] node 0: [mem 0x0000000079ffa000-0x0000000079ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff]
[ 0.000000] On node 0 totalpages: 497117
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7744 pages used for memmap
[ 0.000000] DMA32 zone: 493122 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x4f])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res edge lint[0xcb])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] res edge lint[0x9d])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high dfl lint[0x5e])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79579000-0x795a8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x795fd000-0x7970dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7970e000-0x79a7afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79a7c000-0x79abdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79c2c000-0x79ff9fff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880079200000 s79704 r0 d30888 u524288
[ 0.000000] pcpu-alloc: s79704 r0 d30888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 489288
[ 0.000000] Kernel command line: root=/dev/sda3 console=ttyS0,115200N8 panic=30
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes
[ 0.000000] log_buf_len min size: 262144 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 251304(95%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 1940648K/1988468K available (5079K kernel code, 526K rwdata, 1828K rodata, 780K init, 768K bss, 47820K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x18
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1996800 KHz
[ 0.000000] lapic_timer_frequency = 332800
[ 0.000000] tsc: Detected 1996.800 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200)
[ 0.011029] pid_max: default: 32768 minimum: 301
[ 0.015669] ACPI: Core revision 20150204
[ 0.046014] ACPI: All ACPI Tables successfully acquired
[ 0.051581] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.058305] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.065706] CPU: Physical Processor ID: 0
[ 0.069732] CPU: Processor Core ID: 0
[ 0.073414] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.079437] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.091269] mce: CPU supports 6 MCE banks
[ 0.095301] CPU0: Thermal monitoring enabled (TM1)
[ 0.100109] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.105524] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.111927] Freeing SMP alternatives memory: 20K (ffffffff81948000 - ffffffff8194d000)
[ 0.120646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.166209] TSC deadline timer enabled
[ 0.166214] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (fam: 06, model: 37, stepping: 03)
[ 0.175704] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.186093] ... version: 3
[ 0.190115] ... bit width: 40
[ 0.194221] ... generic registers: 2
[ 0.198242] ... value mask: 000000ffffffffff
[ 0.203565] ... max period: 000000ffffffffff
[ 0.208889] ... fixed-purpose events: 3
[ 0.212910] ... event mask: 0000000700000003
[ 0.219193] x86: Booting SMP configuration:
[ 0.223403] .... node #0, CPUs: #1 #2 #3
[ 0.281575] x86: Booted up 1 node, 4 CPUs
[ 0.285796] smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
[ 0.292998] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.301334] devtmpfs: initialized
[ 0.304936] PM: Registering ACPI NVS region [mem 0x795fd000-0x7970dfff] (1118208 bytes)
[ 0.313234] RTC time: 9:45:26, date: 02/28/15
[ 0.317874] NET: Registered protocol family 16
[ 0.326361] cpuidle: using governor ladder
[ 0.338498] cpuidle: using governor menu
[ 0.342475] ACPI: bus type PCI registered
[ 0.346522] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.355846] PCI: not using MMCONFIG
[ 0.359339] PCI: Using configuration type 1 for base access
[ 0.373572] ACPI: Added _OSI(Module Device)
[ 0.377772] ACPI: Added _OSI(Processor Device)
[ 0.382224] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.386940] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.411152] ACPI: Dynamic OEM Table Load:
[ 0.415232] ACPI: SSDT 0xFFFF880078D66800 0003D7 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.425176] ACPI: Dynamic OEM Table Load:
[ 0.429240] ACPI: SSDT 0xFFFF880078D66C00 0003DE (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.439848] ACPI: Dynamic OEM Table Load:
[ 0.443914] ACPI: SSDT 0xFFFF880078F13000 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.453747] ACPI: Dynamic OEM Table Load:
[ 0.457825] ACPI: SSDT 0xFFFF880078C73B40 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.469905] ACPI: Interpreter enabled
[ 0.473589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.482879] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.492188] ACPI: (supports S0 S3 S4 S5)
[ 0.496115] ACPI: Using IOAPIC for interrupt routing
[ 0.501291] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.512350] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.521536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.543753] ACPI: Power Resource [USBC] (on)
[ 0.550366] ACPI: Power Resource [PLPE] (on)
[ 0.555131] ACPI: Power Resource [PLPE] (on)
[ 0.571660] ACPI: Power Resource [CLK0] (on)
[ 0.576034] ACPI: Power Resource [CLK1] (on)
[ 0.655979] ACPI: Power Resource [FN00] (off)
[ 0.661803] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.668007] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.676680] \_SB_.PCI0:_OSC invalid UUID
[ 0.676684] _OSC request data:1 1f 0
[ 0.676692] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.683675] PCI host bridge to bus 0000:00
[ 0.687788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.693291] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.699483] pci_bus 0000:00: root bus resource [io 0x0cf8-0x0cff]
[ 0.705674] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.712472] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.719272] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.726073] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.733567] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.741061] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.748564] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.748790] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.748806] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[ 0.748819] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.748832] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
[ 0.749070] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[ 0.749093] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
[ 0.749105] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
[ 0.749115] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
[ 0.749126] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.749137] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.749148] pci 0000:00:13.0: reg 0x24: [mem 0xd0716000-0xd07167ff]
[ 0.749204] pci 0000:00:13.0: PME# supported from D3hot
[ 0.749405] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.749427] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
[ 0.749495] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.749671] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.755430] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.755459] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[ 0.755474] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[ 0.755586] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.755788] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.755814] pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]
[ 0.755894] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.756091] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.756164] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.756357] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.756429] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.756625] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.756696] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.756894] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[ 0.756965] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.757166] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.757432] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.757470] pci 0000:00:1f.3: reg 0x10: [mem 0xd0714000-0xd071401f]
[ 0.757543] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.757898] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.762982] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.763005] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.763035] pci 0000:02:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
[ 0.763055] pci 0000:02:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref]
[ 0.763157] pci 0000:02:00.0: supports D1 D2
[ 0.763161] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.763218] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.776923] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.781904] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.781910] pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
[ 0.782001] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.787070] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.792078] pci_bus 0000:00: on NUMA node 0
[ 0.793849] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.801163] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.808482] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.815785] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.823097] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.830398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.838878] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.846204] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.856873] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.861911] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.867587] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.875696] vgaarb: loaded
[ 0.878413] vgaarb: bridge control possible 0000:00:02.0
[ 0.883860] SCSI subsystem initialized
[ 0.887636] libata version 3.00 loaded.
[ 0.887659] ACPI: bus type USB registered
[ 0.891707] usbcore: registered new interface driver usbfs
[ 0.897222] usbcore: registered new interface driver hub
[ 0.902571] usbcore: registered new device driver usb
[ 0.907677] Linux video capture interface: v2.00
[ 0.912352] PCI: Using ACPI for IRQ routing
[ 0.922462] PCI: pci_cache_line_size set to 64 bytes
[ 0.922472] pci 0000:00:1c.1: can't claim BAR 8 [mem 0xd0600000-0xd06fffff]: no compatible bridge window
[ 0.931968] pci 0000:00:02.0: can't claim BAR 0 [mem 0xd0000000-0xd03fffff]: no compatible bridge window
[ 0.941463] pci 0000:00:02.0: can't claim BAR 2 [mem 0xc0000000-0xcfffffff pref]: no compatible bridge window
[ 0.951393] pci 0000:00:13.0: can't claim BAR 5 [mem 0xd0716000-0xd07167ff]: no compatible bridge window
[ 0.960889] pci 0000:00:14.0: can't claim BAR 0 [mem 0xd0700000-0xd070ffff 64bit]: no compatible bridge window
[ 0.970901] pci 0000:00:1a.0: can't claim BAR 0 [mem 0xd0500000-0xd05fffff]: no compatible bridge window
[ 0.980393] pci 0000:00:1a.0: can't claim BAR 1 [mem 0xd0400000-0xd04fffff]: no compatible bridge window
[ 0.989895] pci 0000:00:1b.0: can't claim BAR 0 [mem 0xd0710000-0xd0713fff 64bit]: no compatible bridge window
[ 0.999918] pci 0000:02:00.0: can't claim BAR 2 [mem 0xd0604000-0xd0604fff 64bit]: no compatible bridge window
[ 1.009935] pci 0000:02:00.0: can't claim BAR 4 [mem 0xd0600000-0xd0603fff 64bit pref]: no compatible bridge window
[ 1.020385] pci 0000:00:1f.3: can't claim BAR 0 [mem 0xd0714000-0xd071401f]: no compatible bridge window
[ 1.029894] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 1.029898] e820: reserve RAM buffer [mem 0x79579000-0x7bffffff]
[ 1.029902] e820: reserve RAM buffer [mem 0x795fd000-0x7bffffff]
[ 1.029905] e820: reserve RAM buffer [mem 0x79a7c000-0x7bffffff]
[ 1.029908] e820: reserve RAM buffer [mem 0x79c2c000-0x7bffffff]
[ 1.029911] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 1.030162] Switched to clocksource refined-jiffies
[ 1.035196] pnp: PnP ACPI init
[ 1.038353] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.038615] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.044550] system 00:01: [io 0x0400-0x047f] has been reserved
[ 1.050486] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 1.056418] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.056688] system 00:02: [io 0x0290-0x029f] has been reserved
[ 1.062629] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.063624] pnp 00:03: [dma 3]
[ 1.063928] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 PNP0401 (active)
[ 1.064483] pnp 00:04: [dma 0 disabled]
[ 1.064576] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.065488] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.072471] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[ 1.079100] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[ 1.085724] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 1.092351] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved
[ 1.098974] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 1.105600] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 1.112226] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.118853] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved
[ 1.125480] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.128801] pnp: PnP ACPI: found 6 devices
[ 1.140911] Switched to clocksource acpi_pm
[ 1.145151] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.145158] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1.145163] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 1.145175] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 02] add_size 200000
[ 1.145180] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff] to [bus 02] add_size 200000
[ 1.145189] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1.145194] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 1.145198] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 1.145208] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 1.145213] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 1.145217] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 1.145232] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.145237] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.145241] pci 0000:00:1c.1: res[8]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 200000
[ 1.145245] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x001fffff 64bit pref] get_res_add_size add_size 200000
[ 1.145249] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.145254] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.145258] pci 0000:00:1c.3: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.145262] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.145266] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.145270] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.145274] pci 0000:00:1c.3: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.145284] pci 0000:00:02.0: BAR 2: no space for [mem size 0x10000000 pref]
[ 1.152363] pci 0000:00:02.0: BAR 2: trying firmware assignment [mem size 0x10000000 pref]
[ 1.160653] pci 0000:00:02.0: BAR 2: assigned [mem 0xc0000000-0xcfffffff pref]
[ 1.167906] pci 0000:00:02.0: BAR 0: no space for [mem size 0x00400000]
[ 1.174547] pci 0000:00:02.0: BAR 0: trying firmware assignment [mem size 0x00400000]
[ 1.182404] pci 0000:00:02.0: BAR 0: assigned [mem 0xd0000000-0xd03fffff]
[ 1.189225] pci 0000:00:1a.0: BAR 0: no space for [mem size 0x00100000]
[ 1.195866] pci 0000:00:1a.0: BAR 0: trying firmware assignment [mem size 0x00100000]
[ 1.203723] pci 0000:00:1a.0: BAR 0: assigned [mem 0xd0500000-0xd05fffff]
[ 1.210543] pci 0000:00:1a.0: BAR 1: no space for [mem size 0x00100000]
[ 1.217183] pci 0000:00:1a.0: BAR 1: trying firmware assignment [mem size 0x00100000]
[ 1.225031] pci 0000:00:1a.0: BAR 1: assigned [mem 0xd0400000-0xd04fffff]
[ 1.231852] pci 0000:00:1c.0: BAR 8: no space for [mem size 0x00200000]
[ 1.238492] pci 0000:00:1c.0: BAR 8: failed to assign [mem size 0x00200000]
[ 1.245484] pci 0000:00:1c.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
[ 1.253077] pci 0000:00:1c.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
[ 1.261017] pci 0000:00:1c.1: BAR 8: no space for [mem size 0x00300000]
[ 1.267663] pci 0000:00:1c.1: BAR 8: failed to assign [mem size 0x00300000]
[ 1.274655] pci 0000:00:1c.1: BAR 9: no space for [mem size 0x00300000 64bit pref]
[ 1.282248] pci 0000:00:1c.1: BAR 9: failed to assign [mem size 0x00300000 64bit pref]
[ 1.290194] pci 0000:00:1c.2: BAR 8: no space for [mem size 0x00200000]
[ 1.296835] pci 0000:00:1c.2: BAR 8: failed to assign [mem size 0x00200000]
[ 1.303831] pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref]
[ 1.311427] pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
[ 1.319373] pci 0000:00:1c.3: BAR 8: no space for [mem size 0x00200000]
[ 1.326013] pci 0000:00:1c.3: BAR 8: failed to assign [mem size 0x00200000]
[ 1.333008] pci 0000:00:1c.3: BAR 9: no space for [mem size 0x00200000 64bit pref]
[ 1.340604] pci 0000:00:1c.3: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
[ 1.348552] pci 0000:00:14.0: BAR 0: no space for [mem size 0x00010000 64bit]
[ 1.355711] pci 0000:00:14.0: BAR 0: trying firmware assignment [mem size 0x00010000 64bit]
[ 1.364091] pci 0000:00:14.0: BAR 0: assigned [mem 0xd0700000-0xd070ffff 64bit]
[ 1.371439] pci 0000:00:1b.0: BAR 0: no space for [mem size 0x00004000 64bit]
[ 1.378604] pci 0000:00:1b.0: BAR 0: trying firmware assignment [mem size 0x00004000 64bit]
[ 1.386981] pci 0000:00:1b.0: BAR 0: assigned [mem 0xd0710000-0xd0713fff 64bit]
[ 1.394333] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.400454] pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff]
[ 1.406574] pci 0000:00:1c.3: BAR 7: assigned [io 0x3000-0x3fff]
[ 1.412695] pci 0000:00:13.0: BAR 5: no space for [mem size 0x00000800]
[ 1.419338] pci 0000:00:13.0: BAR 5: trying firmware assignment [mem size 0x00000800]
[ 1.427193] pci 0000:00:13.0: BAR 5: assigned [mem 0xd0716000-0xd07167ff]
[ 1.434006] pci 0000:00:1f.3: BAR 0: no space for [mem size 0x00000020]
[ 1.440647] pci 0000:00:1f.3: BAR 0: trying firmware assignment [mem size 0x00000020]
[ 1.448505] pci 0000:00:1f.3: BAR 0: assigned [mem 0xd0714000-0xd071401f]
[ 1.455334] pci 0000:00:02.0: BAR 2: no space for [mem size 0x10000000 pref]
[ 1.462409] pci 0000:00:02.0: BAR 2: trying firmware assignment [mem size 0x10000000 pref]
[ 1.470700] pci 0000:00:02.0: BAR 2: assigned [mem 0xc0000000-0xcfffffff pref]
[ 1.477955] pci 0000:00:02.0: BAR 0: no space for [mem size 0x00400000]
[ 1.484594] pci 0000:00:02.0: BAR 0: trying firmware assignment [mem size 0x00400000]
[ 1.492455] pci 0000:00:02.0: BAR 0: assigned [mem 0xd0000000-0xd03fffff]
[ 1.499272] pci 0000:00:1a.0: BAR 0: no space for [mem size 0x00100000]
[ 1.505913] pci 0000:00:1a.0: BAR 0: trying firmware assignment [mem size 0x00100000]
[ 1.513773] pci 0000:00:1a.0: BAR 0: assigned [mem 0xd0500000-0xd05fffff]
[ 1.520592] pci 0000:00:1a.0: BAR 1: no space for [mem size 0x00100000]
[ 1.527235] pci 0000:00:1a.0: BAR 1: trying firmware assignment [mem size 0x00100000]
[ 1.535090] pci 0000:00:1a.0: BAR 1: assigned [mem 0xd0400000-0xd04fffff]
[ 1.541913] pci 0000:00:1c.1: BAR 8: no space for [mem size 0x00100000]
[ 1.548550] pci 0000:00:1c.1: BAR 8: failed to assign [mem size 0x00100000]
[ 1.555546] pci 0000:00:1c.1: BAR 9: no space for [mem size 0x00100000 64bit pref]
[ 1.563138] pci 0000:00:1c.1: BAR 9: failed to assign [mem size 0x00100000 64bit pref]
[ 1.571086] pci 0000:00:14.0: BAR 0: no space for [mem size 0x00010000 64bit]
[ 1.578248] pci 0000:00:14.0: BAR 0: trying firmware assignment [mem size 0x00010000 64bit]
[ 1.586628] pci 0000:00:14.0: BAR 0: assigned [mem 0xd0700000-0xd070ffff 64bit]
[ 1.593976] pci 0000:00:1b.0: BAR 0: no space for [mem size 0x00004000 64bit]
[ 1.601138] pci 0000:00:1b.0: BAR 0: trying firmware assignment [mem size 0x00004000 64bit]
[ 1.609517] pci 0000:00:1b.0: BAR 0: assigned [mem 0xd0710000-0xd0713fff 64bit]
[ 1.616865] pci 0000:00:13.0: BAR 5: no space for [mem size 0x00000800]
[ 1.623509] pci 0000:00:13.0: BAR 5: trying firmware assignment [mem size 0x00000800]
[ 1.631366] pci 0000:00:13.0: BAR 5: assigned [mem 0xd0716000-0xd07167ff]
[ 1.638187] pci 0000:00:1f.3: BAR 0: no space for [mem size 0x00000020]
[ 1.644827] pci 0000:00:1f.3: BAR 0: trying firmware assignment [mem size 0x00000020]
[ 1.652685] pci 0000:00:1f.3: BAR 0: assigned [mem 0xd0714000-0xd071401f]
[ 1.659512] pci 0000:00:1c.3: BAR 8: no space for [mem size 0x00200000]
[ 1.666155] pci 0000:00:1c.3: BAR 8: failed to assign [mem size 0x00200000]
[ 1.673149] pci 0000:00:1c.3: BAR 9: no space for [mem size 0x00200000 64bit pref]
[ 1.680742] pci 0000:00:1c.3: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
[ 1.688689] pci 0000:00:1c.2: BAR 8: no space for [mem size 0x00200000]
[ 1.695329] pci 0000:00:1c.2: BAR 8: failed to assign [mem size 0x00200000]
[ 1.702325] pci 0000:00:1c.2: BAR 9: no space for [mem size 0x00200000 64bit pref]
[ 1.709918] pci 0000:00:1c.2: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
[ 1.717867] pci 0000:00:1c.0: BAR 8: no space for [mem size 0x00200000]
[ 1.724507] pci 0000:00:1c.0: BAR 8: failed to assign [mem size 0x00200000]
[ 1.731500] pci 0000:00:1c.0: BAR 9: no space for [mem size 0x00200000 64bit pref]
[ 1.739096] pci 0000:00:1c.0: BAR 9: failed to assign [mem size 0x00200000 64bit pref]
[ 1.747042] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.752036] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.758165] pci 0000:02:00.0: BAR 4: no space for [mem size 0x00004000 64bit pref]
[ 1.765764] pci 0000:02:00.0: BAR 4: trying firmware assignment [mem size 0x00004000 64bit pref]
[ 1.774578] pci 0000:02:00.0: BAR 4: assigned [mem 0xd0600000-0xd0603fff 64bit pref]
[ 1.782360] pci 0000:02:00.0: BAR 2: no space for [mem size 0x00001000 64bit]
[ 1.789524] pci 0000:02:00.0: BAR 2: trying firmware assignment [mem size 0x00001000 64bit]
[ 1.797901] pci 0000:02:00.0: BAR 2: assigned [mem 0xd0604000-0xd0604fff 64bit]
[ 1.805251] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.810240] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.816370] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 1.821364] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 1.827494] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 1.832490] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 1.838617] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 1.847684] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 1.847688] pci_bus 0000:00: resource 5 [io 0x0cf8-0x0cff]
[ 1.847692] pci_bus 0000:00: resource 6 [io 0x0000-0x006f window]
[ 1.847695] pci_bus 0000:00: resource 7 [io 0x0078-0x0cf7 window]
[ 1.847699] pci_bus 0000:00: resource 8 [io 0x0d00-0xffff window]
[ 1.847703] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
[ 1.847707] pci_bus 0000:00: resource 10 [mem 0x000c0000-0x000dffff window]
[ 1.847711] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000fffff window]
[ 1.847715] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.847719] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 1.847723] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.847726] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 1.847776] NET: Registered protocol family 2
[ 1.852369] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.859666] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.866413] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.873008] TCP: reno registered
[ 1.876266] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.882318] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.888850] NET: Registered protocol family 1
[ 1.893259] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.893500] PCI: CLS 64 bytes, default 64
[ 1.893870] microcode: CPU0 sig=0x30673, pf=0x4, revision=0x321
[ 1.899819] microcode: CPU1 sig=0x30673, pf=0x4, revision=0x321
[ 1.905763] microcode: CPU2 sig=0x30673, pf=0x4, revision=0x321
[ 1.911699] microcode: CPU3 sig=0x30673, pf=0x4, revision=0x321
[ 1.917758] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.926929] Scanning for low memory corruption every 60 seconds
[ 1.933904] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.942890] zpool: loaded
[ 1.945526] zbud: loaded
[ 1.949010] ntfs: driver 2.1.31 [Flags: R/O].
[ 1.953488] fuse init (API version 7.23)
[ 1.958659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.966088] io scheduler noop registered
[ 1.970036] io scheduler deadline registered (default)
[ 1.975959] intel_idle: MWAIT substates: 0x33000020
[ 1.975963] intel_idle: v0.4 model 0x37
[ 1.975966] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.976444] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.984830] ACPI: Power Button [PWRB]
[ 1.988585] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.996966] ACPI: Sleep Button [SLPB]
[ 2.000736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.008159] ACPI: Power Button [PWRF]
[ 2.017100] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.022795] ACPI: Thermal Zone [TZ01] (27 C)
[ 2.027136] GHES: HEST is not enabled!
[ 2.031040] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 2.058098] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.072988] hpet: number irqs doesn't agree with number of timers
[ 2.079324] Non-volatile memory driver v1.3
[ 2.083773] rdac: device handler registered
[ 2.089293] hp_sw: device handler registered
[ 2.093609] emc: device handler registered
[ 2.097732] alua: device handler registered
[ 2.102033] ahci 0000:00:13.0: version 3.0
[ 2.102222] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
[ 2.123159] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 2.131280] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso
[ 2.140263] scsi host0: ahci
[ 2.144907] scsi host1: ahci
[ 2.147938] ata1: SATA max UDMA/133 abar m2048@0xd0716000 port 0xd0716100 irq 87
[ 2.155367] ata2: DUMMY
[ 2.157869] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.163983] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.169525] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.175140] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.182697] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): unknown MAC, using family default
[ 2.202177] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): rtl_chipcmd_cond == 1 (loop: 100, delay: 100).
[ 2.212902] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc9000003a000, ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 88
[ 2.223196] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.231794] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.237051] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.244868] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00001810
[ 2.253343] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.254353] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.261162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.268408] usb usb1: Product: xHCI Host Controller
[ 2.273313] usb usb1: Manufacturer: Linux 4.0.0-rc1-celeron-00036-g4f671fe xhci-hcd
[ 2.280997] usb usb1: SerialNumber: 0000:00:14.0
[ 2.285947] hub 1-0:1.0: USB hub found
[ 2.289745] hub 1-0:1.0: 6 ports detected
[ 2.295257] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.300518] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.309014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.315833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.323082] usb usb2: Product: xHCI Host Controller
[ 2.327987] usb usb2: Manufacturer: Linux 4.0.0-rc1-celeron-00036-g4f671fe xhci-hcd
[ 2.335671] usb usb2: SerialNumber: 0000:00:14.0
[ 2.340610] hub 2-0:1.0: USB hub found
[ 2.344462] hub 2-0:1.0: 1 port detected
[ 2.348867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.355427] ehci-pci: EHCI PCI platform driver
[ 2.359916] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.366351] usbcore: registered new interface driver usb-storage
[ 2.372442] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.382652] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.387659] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.393137] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.400231] rtc_cmos 00:00: RTC can wake from S4
[ 2.405158] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 2.411450] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 2.418357] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
[ 2.435477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.445843] saa7146: register extension 'budget_av'
[ 2.450781] usbcore: registered new interface driver dvb_usb_ttusb2
[ 2.458629] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@xxxxxxxxxx
[ 2.467113] Intel P-state driver initializing.
[ 2.471795] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.476085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.477759] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 2.477762] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.479894] ata1.00: configured for UDMA/133
[ 2.480463] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 2.480947] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.481003] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.481274] sd 0:0:0:0: [sda] Write Protect is off
[ 2.481278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.481545] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.536403] usbcore: registered new interface driver usbhid
[ 2.539657] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.542346] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.552077] usbhid: USB HID core driver
[ 2.556010] TCP: cubic registered
[ 2.564737] Magic number: 3:269:779
[ 2.569110] rtc_cmos 00:00: setting system clock to 2015-02-28 09:45:28 UTC (1425116728)
[ 2.577355] PM: Hibernation image not present or could not be loaded.
[ 2.589769] EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
[ 2.598819] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 2.636096] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.643931] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.672274] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.688889] devtmpfs: mounted
[ 2.692638] Freeing unused kernel memory: 780K (ffffffff81885000 - ffffffff81948000)
[ 2.700523] Write protecting the kernel read-only data: 8192k
[ 2.708500] Freeing unused kernel memory: 1052K (ffff8800014f9000 - ffff880001600000)
[ 2.717599] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
[ 2.868428] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 2.875678] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.882973] usb 1-2: Product: USB2.0 Hub
[ 2.890091] hub 1-2:1.0: USB hub found
[ 2.894895] hub 1-2:1.0: 3 ports detected
[ 2.928559] tsc: Refined TSC clocksource calibration: 1999.999 MHz
[ 3.068745] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 3.260564] usb 1-3: New USB device found, idVendor=0b48, idProduct=300d
[ 3.267453] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.274734] usb 1-3: Product: TT-USB2.0
[ 3.278643] usb 1-3: Manufacturer: TechnoTrend
[ 3.283172] usb 1-3: SerialNumber: LHJNON
[ 3.290312] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state.
[ 3.299412] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.308572] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.318205] DVB: registering new adapter (Technotrend TT-connect CT-3650)
[ 3.330524] ttusb2: CI initialized.
[ 3.334528] usb 1-3: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
[ 3.352755] usb 1-3: DVB: registering adapter 0 frontend 1 (NXP TDA10048HN DVB-T)...
[ 3.362045] IR keymap rc-tt-1500 not found
[ 3.366676] Registered IR keymap rc-empty
[ 3.371582] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input6
[ 3.383307] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0
[ 3.393614] dvb-usb: schedule remote query interval to 150 msecs.
[ 3.496879] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.652650] systemd[1]: Failed to insert module 'autofs4'
[ 3.658621] systemd[1]: Failed to insert module 'ipv6'
[ 3.664187] systemd[1]: Set hostname to <maggie>.
[ 3.693580] random: systemd urandom read with 88 bits of entropy available
[ 3.935844] Switched to clocksource tsc
[ 3.999309] LVM: Logical Volume autoactivation enabled.
[ 4.004621] LVM: Activation generator successfully completed.
[ 4.482037] random: nonblocking pool is initialized
[ 4.782988] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.815023] systemd[1]: Starting Replay Read-Ahead Data...
[ 4.833305] systemd[1]: Starting Collect Read-Ahead Data...
[ 4.849039] systemd[1]: Expecting device dev-ttyS0.device...
[ 4.864329] systemd-readahead[87]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 4.876644] systemd[1]: Starting Syslog Socket.
[ 4.892606] systemd[1]: Listening on Syslog Socket.
[ 4.897574] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.912413] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.918235] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.936458] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.943506] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.960803] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.966999] systemd[1]: Starting Journal Socket.
[ 4.980800] systemd[1]: Listening on Journal Socket.
[ 4.985901] systemd[1]: Mounted Huge Pages File System.
[ 4.991189] systemd[1]: Starting Create dynamic rule for /dev/root link...
[ 5.009575] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.018817] systemd[1]: Starting Create static device nodes in /dev...
[ 5.037988] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.058031] systemd[1]: Starting Journal Service...
[ 5.085074] systemd[1]: Started Journal Service.
[ 5.401734] dvb-usb: recv bulk message failed: -110
[ 5.406788] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[ 5.449996] systemd-journald[92]: Vacuuming done, freed 0 bytes
[ 6.143493] systemd-udevd[124]: starting version 208
[ 6.232221] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 6.264607] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 6.299152] systemd-udevd[127]: renamed network interface eth0 to enp2s0
[ 7.417653] dvb-usb: recv bulk message failed: -110
[ 7.422664] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[ 7.431914] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected.
[ 8.965283] Adding 2097148k swap on /dev/sda1. Priority:42 extents:1 across:2097148k FS
[ 12.316229] EXT4-fs (sda5): barriers disabled
[ 12.333579] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,barrier=0
[ 34.399146] systemd-journald[92]: Received request to flush runtime journal from PID 1

Next message: Brian Norris: "[PATCH 1/7] mtd: docg3: drop dead code"
Previous message: Brian Norris: "[PATCH 4/7] mtd: nand: fixup bounds checks for nand_{lock,unlock}()"
In reply to: Jiang Liu: "Re: regression in 4.0.0-rc1 with r8169 ethernet"
Next in thread: Jiang Liu: "Re: regression in 4.0.0-rc1 with r8169 ethernet"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]