[PATCH] Staging: rtl8188eu: fix style errors
From: Matteo Semenzato
Date: Fri Feb 27 2015 - 11:49:28 EST
From: Matteo Semenzato <mattew8898@xxxxxxxxx>
This patch fixes the following errors:
ERROR: code indent should use tabs where possible
ERROR: space prohibited before that
Signed-off-by: Matteo Semenzato <mattew8898@xxxxxxxxx>
---
drivers/staging/rtl8188eu/hal/Hal8188ERateAdaptive.c | 4 ++--
drivers/staging/rtl8188eu/hal/odm.c | 8 ++++----
drivers/staging/rtl8188eu/hal/pwrseqcmd.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 2 +-
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c | 6 +++---
drivers/staging/rtl8188eu/hal/usb_halinit.c | 2 +-
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/Hal8188ERateAdaptive.c b/drivers/staging/rtl8188eu/hal/Hal8188ERateAdaptive.c
index 3c651d5..b5e5c93 100644
--- a/drivers/staging/rtl8188eu/hal/Hal8188ERateAdaptive.c
+++ b/drivers/staging/rtl8188eu/hal/Hal8188ERateAdaptive.c
@@ -87,7 +87,7 @@ static u8 DROPING_NECESSARY[RATESIZE] = {
static u8 PendingForRateUpFail[5] = {2, 10, 24, 40, 60};
static u16 DynamicTxRPTTiming[6] = {
- 0x186a, 0x30d4, 0x493e, 0x61a8, 0x7a12 , 0x927c}; /* 200ms-1200ms */
+ 0x186a, 0x30d4, 0x493e, 0x61a8, 0x7a12, 0x927c}; /* 200ms-1200ms */
/* End Rate adaptive parameters */
@@ -714,7 +714,7 @@ void ODM_RA_TxRPT2Handle_8188E(struct odm_dm_struct *dm_odm, u8 *TxRPT_Buf, u16
pRAInfo->RTY[0], pRAInfo->RTY[1],
pRAInfo->RTY[2], pRAInfo->RTY[3],
pRAInfo->RTY[4], pRAInfo->DROP,
- macid_entry0 , macid_entry1));
+ macid_entry0, macid_entry1));
if (pRAInfo->PTActive) {
if (pRAInfo->RAstage < 5)
odm_RateDecision_8188E(dm_odm, pRAInfo);
diff --git a/drivers/staging/rtl8188eu/hal/odm.c b/drivers/staging/rtl8188eu/hal/odm.c
index 06477e8..d12eac4 100644
--- a/drivers/staging/rtl8188eu/hal/odm.c
+++ b/drivers/staging/rtl8188eu/hal/odm.c
@@ -881,7 +881,7 @@ void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal)
if (pDM_PSTable->PreRFState != pDM_PSTable->CurRFState) {
if (pDM_PSTable->CurRFState == RF_Save) {
- phy_set_bb_reg(adapter, 0x874 , 0x1C0000, 0x2); /* Reg874[20:18]=3'b010 */
+ phy_set_bb_reg(adapter, 0x874, 0x1C0000, 0x2); /* Reg874[20:18]=3'b010 */
phy_set_bb_reg(adapter, 0xc70, BIT3, 0); /* RegC70[3]=1'b0 */
phy_set_bb_reg(adapter, 0x85c, 0xFF000000, 0x63); /* Reg85C[31:24]=0x63 */
phy_set_bb_reg(adapter, 0x874, 0xC000, 0x2); /* Reg874[15:14]=2'b10 */
@@ -889,7 +889,7 @@ void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal)
phy_set_bb_reg(adapter, 0x818, BIT28, 0x0); /* Reg818[28]=1'b0 */
phy_set_bb_reg(adapter, 0x818, BIT28, 0x1); /* Reg818[28]=1'b1 */
} else {
- phy_set_bb_reg(adapter, 0x874 , 0x1CC000, pDM_PSTable->Reg874);
+ phy_set_bb_reg(adapter, 0x874, 0x1CC000, pDM_PSTable->Reg874);
phy_set_bb_reg(adapter, 0xc70, BIT3, pDM_PSTable->RegC70);
phy_set_bb_reg(adapter, 0x85c, 0xFF000000, pDM_PSTable->Reg85C);
phy_set_bb_reg(adapter, 0xa74, 0xF000, pDM_PSTable->RegA74);
@@ -1043,7 +1043,7 @@ void odm_RefreshRateAdaptiveMaskCE(struct odm_dm_struct *pDM_Odm)
for (i = 0; i < ODM_ASSOCIATE_ENTRY_NUM; i++) {
struct sta_info *pstat = pDM_Odm->pODM_StaInfo[i];
if (IS_STA_VALID(pstat)) {
- if (ODM_RAStateCheck(pDM_Odm, pstat->rssi_stat.UndecoratedSmoothedPWDB, false , &pstat->rssi_level)) {
+ if (ODM_RAStateCheck(pDM_Odm, pstat->rssi_stat.UndecoratedSmoothedPWDB, false, &pstat->rssi_level)) {
ODM_RT_TRACE(pDM_Odm, ODM_COMP_RA_MASK, ODM_DBG_LOUD,
("RSSI:%d, RSSI_LEVEL:%d\n",
pstat->rssi_stat.UndecoratedSmoothedPWDB, pstat->rssi_level));
@@ -1191,7 +1191,7 @@ void odm_RSSIMonitorCheckCE(struct odm_dm_struct *pDM_Odm)
pdmpriv->EntryMinUndecoratedSmoothedPWDB = 0;
FindMinimumRSSI(Adapter);
- ODM_CmnInfoUpdate(&pHalData->odmpriv , ODM_CMNINFO_RSSI_MIN, pdmpriv->MinUndecoratedPWDBForDM);
+ ODM_CmnInfoUpdate(&pHalData->odmpriv, ODM_CMNINFO_RSSI_MIN, pdmpriv->MinUndecoratedPWDBForDM);
}
/* 3============================================================ */
diff --git a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
index be0663e..768bf57 100644
--- a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
+++ b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
@@ -37,7 +37,7 @@ u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers,
do {
pwrcfgcmd = pwrseqcmd[aryidx];
- RT_TRACE(_module_hal_init_c_ , _drv_info_,
+ RT_TRACE(_module_hal_init_c_, _drv_info_,
("rtl88eu_pwrseqcmdparsing: offset(%#x) cut_msk(%#x)"
"fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x)"
"msk(%#x) value(%#x)\n",
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index eea4c8a..8e7a0b1 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -102,7 +102,7 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
}
}
rtl88eu_dm_txpower_track_adjust(&hal_data->odmpriv, 1, &direction,
- &pwrtrac_value);
+ &pwrtrac_value);
if (direction == 1) {
/* Increase TX power */
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 3222d8d..1aae302 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -519,7 +519,7 @@ void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoL
padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT1) ? true : false;
DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__,
- padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown , padapter->pwrctrlpriv.bSupportRemoteWakeup);
+ padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown, padapter->pwrctrlpriv.bSupportRemoteWakeup);
DBG_88E("### PS params => power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable);
}
@@ -549,8 +549,8 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool Auto
}
if (bIn24G) {
DBG_88E("======= Path %d, Channel %d =======\n", rfPath, ch);
- DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_CCK_Base[rfPath][ch]);
- DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_BW40_Base[rfPath][ch]);
+ DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", rfPath, ch, pHalData->Index24G_CCK_Base[rfPath][ch]);
+ DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", rfPath, ch, pHalData->Index24G_BW40_Base[rfPath][ch]);
}
}
for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 14650e9..0078468 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -1796,7 +1796,7 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
}
break;
case HW_VAR_H2C_MEDIA_STATUS_RPT:
- rtl8188e_set_FwMediaStatus_cmd(Adapter , (*(__le16 *)val));
+ rtl8188e_set_FwMediaStatus_cmd(Adapter, (*(__le16 *)val));
break;
case HW_VAR_BCN_VALID:
/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */
--
2.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/